Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic molded parts absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be supplied with the same key (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic molded parts absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be keyed alike (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the specific motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetric side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 ltr. & 40 ltr. in combination.

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the specific motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes for asymmetric side case carriers. Recommendation: use a narrower case on the exhaust side, e.g., 30 liters & 40 liters in combination.

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counterplate easy installation with just a few screws does not require ABE or registration

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with the appropriate fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Rubberized zipper Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessory: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with the appropriate fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by the magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Rubberized zipper Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessory: security lock Carrying handle Very low weight Recommended load capacity: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Special accessories for Hepco&Becker Gobi side cases. The construction of the GOBI side case, made of two honeycomb-connected shells, creates a 3.5-liter cavity between the inner and outer case shell. This can be made available with this faucet.

Dimensions: WxHxD = 44x11x26 rubberized zipper waterproof inner bag

The standard bracket of the aluminum rack is not compatible with the aluminum top case 35. Therefore, this bracket is used as an adapter and is bolted to the aluminum rack.

Attachment on the outside of the case. Provides the option to carry your own accessories with straps (not included in the delivery) on the case. NOTE: Holes must be drilled into the case/top case.

waterproof easy to attach for Daypack 2.0 and Royster tank bags also suitable for tablets sturdy yet flexible back panel - no flapping!

compatible with almost all model-specific HEPCO&BECKER side case carriers, either permanently mounted or in the Lock-it version (not included) Absolutely waterproof due to glued special seal Impact-resistant plastic components Made from 1.5mm thick anodized aluminum sheet Dual-opening lid - lid removable Top loader: Quickly and securely load from above thanks to generous opening Includes luggage net on the inside of the lid Includes key and locking cylinder Lid lockable, case lockable to the carrier Please enter desired locking in the comment field during the ordering process Case sets are automatically delivered with the same key Child's play to remove from the case carrier Perfectly adaptable to your needs through a comprehensive range of accessories Not suitable for a helmet Recommended load: 10kg per case (please observe the notes from the vehicle-specific carrier and the motorcycle manufacturer's specifications) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Please observe the vehicle-specific notes of the carrier and the model-specific information from the motorcycle manufacturer.

suitable for almost all model-specific HEPCO&BECKER side case carriers, either permanently mounted or in the Lock-it version (not included) Absolutely waterproof due to glued special seal Impact-resistant plastic components Made from 1.5mm thick anodized aluminum sheet Dual-opening lid - lid removable Top loader: Quickly and securely loadable from above thanks to generous opening Includes luggage net on the inside of the lid Includes key and locking cylinder Lid lockable, case lockable on the carrier Please enter desired locking in the comment field during the ordering process Case sets are automatically delivered with the same key Child's play to remove from the case carrier Perfectly adaptable to your needs through a comprehensive range of accessories not suitable for a helmet Recommended load: 10kg per case (please observe the notes from the vehicle-specific carrier and the motorcycle manufacturer's specifications) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Please observe the vehicle-specific notes of the carrier and the model-specific information from the motorcycle manufacturer.

The tail bag in classic Ibarra design!Specifically designed for mounting on the luggage racks of adventure bikes such as the BMW GS models or the KTM Adventure series, the Ibarra tail bag also fits on the luggage racks of most current adventure bikes. It is super easy to install and provides easily accessible additional storage space. The passenger is not restricted in any way, and the position of the bag far back on the vehicle does not unnecessarily complicate mounting for the rider.Non-slip, precisely fitting base plate for a play-free and stable hold on the vehicleHigh-quality Cordura®Washable and easy to cleanReflective inserts for increased safetyWaterproof, high-quality zippersElastic, reflective drawstring with quick-release for easy attachment of gloves or rain jacketLarge main compartment without dividers for maximum space and individual loadingRain cover available as an optionPlease use a paint protection film if necessary! Dimensions: (L x W x H) approx. 24 x 29 x 17 cmVolume: approx. 9 liters

These installation locks are specifically designed for Touratech side bags with ZEGA docking panel.If you require a specific key number, please enter it during the ordering process.Delivery includes:- 2x lock- 4x keys

Der Touratech Kofferdeckel-Schutzbelag ist viel mehr als ein gewöhnlicher Kofferdeckelaufkleber! Wozu braucht man das? Weil die Beanspruchungen im realen Reise-Alltag eben höher sind.Durch die spezielle "Raindrop" Oberfläche sorgt der passgenau zugeschnittene Belag für optimale Griffigkeit und Rutschschutz. Er verbessert den sicheren Halt Ihres Gepäcks auf dem Deckel und entlastet damit die Verzurrungen.Die Kofferschutzabdeckung widersteht selbst härtesten Beanspruchungen, z.B. wenn der Koffer als Motorrad-Montageständer genutzt wird.Das zwei Millimeter starke Gummipolster aus Polyuretan ist nicht nur extrem widerstandsfähig, es lässt auch Kratzer und selbst tiefe Riefen im Kofferdeckel einfach verschwinden. Ein Vollsaugen der Schutzfolie mit Wasser ist dennoch ausgeschlossen.Der Touratech Kofferdeckel-Schutzbelag ist jeweils für alle ZEGA Evo Koffergrößen verfügbar. Einfach in der Auswahl die passende Größe wählen (31l, 38l oder 45l).Tipp: Der Polyurethan-Antirutschbelag hilft sogar gegen einen kalten Hintern, wenn der Koffer als Sitz genutzt wird!Die selbstklebende Antirutschmatte lässt sich im Handumdrehen schnell und einfach auf dem Kofferdeckel aufbringen.- hohe Rutschhemmung- hohe Verschleißfestigkeit- schlagzäh- langlebig- passgenau zugeschnitten (je 2mm Abstand zu Kofferdeckel-ecken und -kanten)Stärke: 2 mmFarbe: schwarzMaterial: PolyurethanQualität:Dekra geprüfte Qualität nach VDI 2700, Blatt 14 Rutschhemmung geprüft nach DIN 51130Reibbeiwert µ = > 0,80

Besser sitzen geht nicht! Für höchste Ansprüche bieten wir die bewährte Komfortsitzbank auch in unserer patentierten, atmungsaktiven Ausführung an!Der Sitzbankaufbau basiert auf einem offenporigen Schaumkern auf den im Sitzbereich ein Abstandsgewebe aufgebracht ist um den Luftaustausch durch den hoch belastbaren, elastischen und wasserdichten Textilbezug zu ermöglichen. Das Ergebnis dieses aufwändigen Aufbaus ist überwältigend und stellt höchsten Fahrkomfort nicht nur auf langen Strecken, sondern auch bei hohen Außentemperaturen und extremer Luftfeuchtigkeit sicher. Dabei stellen sich aber im normalen Alltagsbetrieb keinerlei Nachteile oder Einschränkungen ein. Ganz im Gegenteil wird z. B. Faltenbildung oder Knittern der Unterbekleidung durch den Luftaustausch schon vom ersten Kilometer an vermieden!Die ultimative Sitzbank für Fahrer und Beifahrer! Fakten: -anatomisch angepasste Kontur in aufwändigen Fahrversuchen in Deutschland entwickelt -kein Durchsitzen durch die Verwendung eines hochfesten Schaums aus eigener Fertigung-gleichmäßige Gewichtsverteilung, optimierter Fahrzeugkontakt und perfekte Kontrolle-bi-elastisches Bezugsmaterial mit abgedichteten Nähten-Hohlkehle (Vertiefung) in der Sitzbankmitte zur Steißbeinentlastung-unterschiedliche Höhen lieferbar-optimal positionierte Nähte zur Vermeidung von Druckstellen im Sitzbereich-langstreckentauglich-hochwertigste Materialien und Verarbeitung in höchster Qualität-hergestellt in DeutschlandHöhe: 54 cm

Angeboten wird hier ein Neuteil Fahrzeug: K25 R1200GS, R1200GS Adv., HP2 Enduro, HP2 Megamoto, HP2 Sport, RnineT, R900RT, R1200RT, R1200R, R1200ST, R1200S,  Hersteller: BMW Neupreis: 168,15 € Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 13547672966 

Original BMW Spare Part Cylinder Head Cover Granite Grey Left New and originally packaged BMW Part Number: 11127723427 Fits the following vehicles according to the part number:

The ideal bag for all aluminum cases and luggage racks! If you want to securely fasten your tools, need additional and expandable storage space on the case lids, are looking for a bag for various motorcycles or luggage racks, and desire absolute robustness and durability, this bag is perfectly equipped for you!Thanks to different attachment loops, it is possible to secure the bag in various ways with the included straps. Additionally, internally sewn loops effectively prevent the tool roll or other heavy items from slipping.With a circumferential zipper, the volume can be quickly doubled if needed, and small items can be stored in the outer pocket. A sturdy carrying handle makes handling the bag easier.- washable and easy to clean- ergonomic, sturdy carrying handle for practical transport away from the motorcycle- easily expandable via all-around zipper- built for extreme loads and long durability - low weight with high payload and large usable volume- elastic, reflective rubber bands with quick-release for fast attachment of gloves or rain jackets - flat outer pockets for quickly needed small items- large main compartment without annoying dividers for maximum space and individual loading- non-slip, soft base plate to avoid paint damage and ensure secure holdDimensions: (L x W x H) approx. 35 x 18 x 15/25 cm; Volume: approx. 6/12 litersColor: blackAttention: Please use a paint protection film if necessary! TIP: Can be universally mounted on aluminum cases! E.g., the original aluminum cases of the BMW R1250GSA/R1200GSA.

Do you need more stability for large soft luggage on your Touratech top case carrier or BMW Adventure luggage bridge? This luggage plate increases the contact area, is super stable, and allows for the secure attachment of even large pieces of luggage.- fits all Touratech top case carriers- fits all BMW Adventure luggage bridges- lightweight yet stable aluminum base plate- 8 tie-down points- easy installation

PE canister, Made in Germany. With integrated filling tube and ventilation. TÜV certified industrial quality. Optimal for use as an oil canister. Dimensions: 145 x 80 x 275 mmColor: blackWeight: 245 gCan be universally mounted on aluminum cases! For example, the original aluminum cases of the BMW R1250GS-ADV or BMW F850GS.

Koffersysteme weiterentwickelt und so stand auch direkt der Name unseres neuesten Aluminiumkoffers fest. Der ZEGA Evo vereint die zehntausendfach bewährte Robustheit mit einem extra komfortablen Handling - nicht zuletzt dank eines komplett neuen Befestigungssystems.Der Koffer als Teil des Gepäcksystems:Der ZEGA Evo wurde, wie alle Koffer von Touratech vor ihm, nicht als isoliertes Produkt entwickelt, sondern ist von vornherein als Teil eines Gepäcksystems gedacht. Der überragende Praxisnutzen ist Ergebnis der einzigartigen Kombination aus ebenso formschönem wie unverwüstlichem Koffer, genialem Befestigungsmechanismus und pistenfestem Träger aus 18 mm starken Edelstahl-Rohren.Die Vorteile auf einen Blick:- Neu designte Kunststoffecken - schützen beim Unfall Fahrer und Koffer- Bewährte Befestigungspins - für ZEGA Evo Zubehörhalter- Bewährter Griff - für komfortables Tragen- Neu entwickeltes Befestigungssystem - für leichtes Einhängen und stabilen Halt am Kofferträger- Neu entwickelte abschließbare Einhand-Verriegelung - für komfortable und sichere Fixierung am Kofferträger - Neu entwickelter abschließbarer Deckel-Verschluss - für komfortables, beidseitiges Öffnen und Schließen dank praktischer Scharnierfunktion- Bewährte Silikondichtung - für Trockenheit im Koffer auch im strömenden Regen- Bewährte Zurr-Ösen - für sichere Befestigung von Kofferdeckeltaschen und anderem Softgepäck- Serienmäßig Haken an der Deckel-Innenseite - zur Befestigung von Zubehör (Taschen, Netze)Typisch für das Sondersystem ist die Aussparung am rechten Koffer, wodurch sich dieser geschmeidig um den Auspuff schmiegt. Die Koffer rücken näher an die Fahrzeugmitte, die Baubreite verringert sich und das System wirkt durch die symmetrischen Kofferdeckel insgesamt harmonischer. Die stabilen Kofferträger aus Edelstahl widerstehen Kratzern und Rost.Unsere Kofferträger sind aus robustem und rostfreiem 18 mm Edelstahl-Rundrohr gefertigt und garantieren somit eine besonders hohe Stabilität auch abseits der normalen Wege. Eine zusätzliche Querstrebe sorgt für mehr Stabilität, wodurch das Koffersystem auch für den harten Offroad-Einsatz geeignet ist. Da der Kofferträger vorhandene Befestigungspunkte nutzt, ist die Montage kinderleicht.Natürlich haben wir bedacht, dass der Kofferträger bei der Weltumrundung genauso praktikabel ist, wie beim Alltagseinsatz. Daher haben wir auf absolute Soziustauglichkeit geachtet.Gleich mitbestellen: ZEGA Evo Schlosssatz für 2 Koffer 01-050-6000-0 (Nicht im Lieferumfang behalten)