Engine protection & engine accessories

Combination of stainless steel and anodized aluminum to effectively protect the cylinder heads in the event of a fall or tip-over. Also effectively prevents the valve cover from shifting during falls.Scope of delivery:Cylinder protection left pre-assembledCylinder protection right pre-assembledMounting materialsInstallation instructions

Angeboten wird hier ein Neuteil Fahrzeug: K25 R1200GS, R1200GS Adv., HP2 Enduro, HP2 Megamoto, HP2 Sport, RnineT, R900RT, R1200RT, R1200R, R1200ST, R1200S, F650GS Twin, F800GS, ..... Hersteller: BMW Neupreis: 172,54 € Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 13548406249 

Angeboten wird hier ein Neuteil Fahrzeug: K25 R1200GS, R1200GS Adv., HP2 Enduro, HP2 Megamoto, HP2 Sport, RnineT, R900RT, R1200RT, R1200R, R1200ST, R1200S,  Hersteller: BMW Neupreis: 168,15 € Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 13547672966 

Mit ihrer guten Geländetauglichkeit lädt die R1200GS immer wieder zu ausgedehnten Offroadausflügen ein. Damit dieser Genuss reuelos bleibt, haben wir einen Motorschutz speziell für die R1200GS entwickelt. Auftretende Schläge und Belastungen werden über den gesamten Motorblock verteilt, so wird das Motorgehäuse optimal geschützt. Bei herben Geländeeinsätzen kann durch die angeschrägte vordere Form des Motorschutz deutlich einfacher über Steine, Felsen und Bodenunebenheiten gerutscht werden.- auch für Modell 2010

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

Mahle Oil Filter   As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology.   Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine.   Advantages of Mahle oil filters:   - Cold start resistance ensured by a stable pleat geometry - Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts - Load peaks of up to 20 Bar are compensated by the high pressure resistance of the housing - Oil supply is always ensured by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a filter element that is heavily contaminated due to exceeding the change interval) - The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply upon engine start Fits the following vehicles: i3 I01 LCI   (01/2017 — 12/2019) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 12/2019) K22 (R nineT Pure)   (12/2015 — 12/2019) K23 (R nineT Scrambler)   (09/2015 — 12/2019) K32 (R nineT Racer)   (12/2015 — 07/2019) K33 (R nineT Urban G/S)   (03/2016 — 12/2019) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 12/2019) K61 (K 1600 Bagger)   (01/2017 — 12/2019) K83 (F 900 R)   (11/2018 — 12/2019) K84 (F 900 XR)   (11/2018 — 12/2019) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 12/2019) K19 (C 650 GT)   (01/2011 — 12/2019) K08 (C 400 GT)   (04/2018 — 12/2019) K09 (C 400 X)   (03/2018 — 12/2019)

Oil Level Check

With its excellent off-road capabilities, the R1200GS invites you to take extended off-road trips time and again. To ensure that this enjoyment remains guilt-free, we have developed an engine guard specifically for the R1200GS. Impacts and stresses are distributed across the entire engine block, providing optimal protection for the engine casing. During challenging off-road use, the angled front shape of the engine guard allows for much easier sliding over stones, rocks, and uneven terrain.- also for model 2010

for R1250GS/ R1250GS Adventure/ R1200GS/ R1200GS Adventure/ R1200RT/ RnineT/RnineT Scrambler/ RnineT Urban G/S /R1200R/HP2No more fear of stolen oil plugs or foreign "substances" in the oil circuit.No special tools required:Easy to use with a regular key. The key fits conveniently on any keychain.- elaborate workmanship- high-quality branded lock- available keyed alike with the installation locks for our aluminum cases

Brilliant and elegant - beautiful protection against foreign substances in the oil circuit of your R1250/R1200.Made of aluminum, CNC-machined, anodized, and with an integrated hexagon for opening.The plug is simply installed in place of the original plastic part and can then only be opened with a TORX50 key. This makes easy disassembly more difficult, yet quick maintenance remains no problem. (Torx bit is not included)

Our "Sport" valve cover protection emphasizes the sportiness of the boxer motorcycles and protects the sensitive, exposed valve covers from damage. The protection is easy to install and made from high-quality special plastic. This way, slips and falls can occur without damage, without altering the line of the machine with a cumbersome crash bar. Included in the set for the left and right side.