Luggage, Top Case & Tank Bag

Extremely versatile little helpers for packing and securing. - 100 kg guaranteed load capacity- with metal buckle (galvanized and painted)- with TOURATECH logo in yellowColor: black Length: 75 cmWidth: 18 mm

Original BMW Spare Part / Accessory Diameter 41 mm

BMW R1200GS Adventure LC K51 aluminum top case  original BMW 2 with lock cylinders They are about to see an original BMW aluminum top case  for BMW R1200GS Adventure LC. Part of the offer are also two codable lock cylinder. Optionally, a back pad for this top case  order and an inside pocket.

BMW F650GS twin F 650 GS F700GS Twin Alurack - black Top case Carrier Carrier Specific Alurack the highest quality for mounting an H & Topcases.Hepco & Becker aluminum racks are specially designed for our top cases and as the successor to the luggage rack made of tubular Aluracks are almost exclusively offered as All needed today. You can use it every top case of us, whether aluminum or plastic, mounted on this carrier and thus have large selection of different combinations. But not only newly purchased, even existing Hepco & Becker top boxes passen.Jedes Alurack is specially designed for the appropriate motorcycle and produced. Thanks to the construction of high-quality aluminum, the Alurack granted a high strength and a very elegant appearance. to the Alurack also provides additional attachment points for luggage straps fix example, roll bags. Generally, there is a model specific Alurack always consists of a model-specific basic carrier and the carrier plate on the Alurack then be mounted, the top case. The facts: • highest safety - especially developed for Hepco & Becker top case designed • Vehicle Development • Precision fit, easy installation • aluminum construction • Integral plastic trim for covering the fixing points • Rotating attachment for luggage straps • with mounting bracket for all Hepco & Becker top boxes • without headband for own luggage / spacers used • Comprehensive, easy-to-understand AnbauleitungNur for Hepco & Becker top boxes, not for side cases suitable! Model: F 650 GS Twin / 2008 ->

The fixed side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is screwed onto the carrier at the rear right and left and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tubing MADE IN GERMANY Firmly bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please observe model-specific notes from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 ltr. & 40 ltr. in combination. Firmly bolted to the motorcycle frame (no Lock-it system).

BMW F650GS twin F 650 GS F700GS twin F 700 GS Easyrack Topcase black EasyRack - the alternative to AlurackHepco & Becker Easy racks are specially designed for our top cases konzipiert.Sie ​​can so that every top case (except Orbit TC and standard TC) of us, whether aluminum or plastic mounted on this carrier and thus have large selection of different combinations. But not only newly purchased, even existing Hepco & Becker top boxes passen.Jedes Easyrack is specially designed for the appropriate motorcycle and produced. Thanks to the construction of high-quality aluminum, the Easyrack granted a high strength and a very elegant appearance. The Easyrack also provides additional attachment points for luggage straps for example, roll bags attach to können.Der highlight: the top case mounting necessary, the bracket disappears when not in use by simply moving in Easyrack and thus no longer interfere with the dynamic look of the motorcycle. The facts: • with folding bracket for own luggage and all Hepco & Becker top boxes • Made of aluminum, • High strength, high-quality optics • Integral plastic trim, • bracket with ball locking system and mechanical stop • Rotating attachment for luggage straps • Instead Alurack universally montierbarNur for Hepco not suitable & Becker top boxes for side cases! Model: F 650 GS Twin / 2008 -> / F 700 GS

Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our topcases. But not only new topcases fit. Older Hepco&Becker models can also be mounted. The basic mount has not changed.Not compatible are: Hepco&Becker Orbit Topcase and topcases with universal plate.The carriers are model-specific and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With the high-quality coating and proper care, the look is also preserved in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the topcase, but in the side cases or tank bag. usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions) including mounting materials and instructions MADE IN GERMANY the topcase is pushed onto the tube luggage rack and locked to the carrier with a metal locking mechanism Luggage racks generally do not require ABE or registration

New! 2 pieces BMW part number: 71607660615 Fits the following vehicles according to the part number:

BMW R1200GS F 650 700 800 GS Lock Replacement for Cases / Variocases This kit includes 2 locking cylinders and 2 keys for installation in BMW Variocases. Part number 2 in the illustration

BMW Repair Kit Lock Cylinder for Variokoffer Variotopcase...... 51257698202 With this repair kit, you can equip your BMW Variokoffer + Topcase to match the vehicle key. This lock cylinder is used, among other things, in the Variokoffer and in the Topcase of the R1200GS LC + R1200GS LC Adventure, F650GS Twin, F800GS. On the R1200R, R1200RT, R1200ST, it is used in the fuel cap. You can find the complete list of applications here: K50 (R 1200 GS)   (10/2011 — 12/2016) K51 (R 1200 GS Adventure)   (09/2012 — 12/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 08/2006) K26 (R 900 RT, R 1200 RT)   (03/2009 — 09/2013) K27 (R 1200 R)   (12/2009 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K40 (K 1200 S, K 1300 S)   (04/2003 — 08/2008) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 08/2008) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 09/2008) K72 (F 650 GS, F 800 GS)   (10/2006 — 12/2016) K75 (F 800 GS Adventure)   (05/2012 — 12/2016)

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

Stabile Aluminiumplatte zur Verbreiterung auf nahezu allen Gepäckbrückenmit gerader Auflagefläche, wenn kein Topcase, sondern loses Gepäck transportiert werden soll. Durch die hochgezogenen Kanten und die zusätzlichen Haltepunkte ist die Verbreiterung ideal zum sicheren Transport auch größerer Gepäckrollen, Reisetaschen, Zelte, Seesäcke etc. geeignet.Konstruktion aus Aluminium mit hoher Festigkeit und hochwertiger OptikBefestigungsmöglichkeiten für GurteNicht geeignet zur Topcasemontageinkl. Montagematerial und Anleitunghochwertige KunststoffbeschichtungEmpfohlene Zuladung: 5kg (Bitte beachten Sie die modellspezifischen Hinweise, sowie die motorradherstellerspezifischen Herstellerangaben. Schweres Gepäck sollte generell nicht auf dem Heck, sondern in den Seitenkoffern oder dem Tankrucksack transportiert werden.

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic components absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be keyed alike (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic components Absorbs shocks and ground contacts Rounded impact edges, recessed tie-down points in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be keyed alike (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load capacity: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and impact-resistant plastic components absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be delivered with the same key (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier at the back Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic molded parts absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be supplied with the same key (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic molded parts Absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be supplied with the same key (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier at the back Luggage systems generally do not require ABE and do not need to be registered

Hepco & Becker aluminum drinking bottle with screw cap (0.7L)

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every journey with a pillion. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. Vehicle-specific notes: also suitable for Xceed Topcase For each Topcase, the backrest is custom-made from black PU material to fit perfectly.

Solid side carriers for mounting Hepco&Becker C-Bow side bags and cases High-quality surface finish Standard Hepco&Becker hard-shell cases, such as the Junior or Journey, do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the installation instructions, vehicle-specific notes, and motorcycle manufacturer specifications for any potential restrictions) Usually combinable without issues with top case carriers, sissy bars, or solo racks (please refer to the installation instructions or vehicle-specific notes for each carrier) Luggage bridge extensions may restrict bag mounting on the carrier Luggage carriers do not require ABE or registration in the documents Delivery includes: left + right + installation instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals. Please ensure that the bags have sufficient distance from the exhaust and that the turn signals have an adequate radiation angle. The exhaust flow must not be directed at the bags.