Touratech Suspension WTE Lowering -35mm Type Expedition for Yamaha 700 Tenere from 2019

A lowering of the front with replacement fork springs from the Dutch suspension specialist Hyperpro. With this spring set, you achieve a sensible lowering of -35mm without compromising handling characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the Yamaha 700 Tenere and offer significantly improved responsiveness and higher safety in the limit range compared to the original fork springs. Info: Fits only for * Yamaha 700 Tenere from 2019*For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> When replacing only one component, optimal handling is not achieved.=> You can find the matching components for your Yamaha 700 Tenere in the accessories of this article. “Please scroll down”Delivery includes:- Fork springs.- Replacement spring for the original shock absorber.- including detailed installation instructions.- suitable fork oil.- Paste to improve the sliding properties of the fork tubes. - Installation instructions with setup information, Our recommendation: Have the conversion carried out by a specialist workshop.Do you have further questions? We are happy to advise you personally, please contact us

The Touratech Suspension Lowering Kit consists of fork springs and a matching set of rocker arms. The set includes replacement fork springs and the rocker arms for the shock absorber. This achieves the best possible lowering of -35mm while maintaining consistently good riding characteristics for the Yamaha 700 Tenere. The suspension still offers good responsiveness and high safety in the limit range even after the modification. Maintain the balance of your motorcycle.Info: Fits only for *Yamaha 700 Tenere from 2019*Scope of delivery:- Fork springs -35mm.- Rocker arms for the original shock absorber.- including detailed installation instructions.- suitable fork oil.- Paste to improve the sliding properties of the fork tubes.Tip: Optionally, a progressive replacement spring can also be installed on the shock absorber. Please see the specified accessories here in the WEB shop.Our recommendation: Have the modification carried out by a professional workshop.Info: The side stand and main stand may need to be adjusted in length.Do you have further questions? We are happy to advise you personally, please contact us.

This shock absorber is perfect for reducing the seat height (-35mm) for the Yamaha 700 Tenere. At the same time, your Yamaha 700 Tenere remains well-tuned and very suitable for touring. More performance and comfort for your Yamaha 700 Tenere with the Touratech Suspension Shock Absorber Type Level2. The Level2 shock absorber in emulsion design can be adjusted for load adaptation to the large travel luggage via handwheel and hydraulic preload adjustment. Even with this design the PDS is installed. A hydraulic bottoming protection that prevents bottoming out even under the most extreme trail conditions with full luggage. Mechanical overload of the shock absorber is prevented. The damping works depending on the stroke. In the predominant driving operation, the shock absorber responds finely and is tuned for comfort and energy-saving. Important points at a glance:=> The shock absorber is configured based on our experiences for the Yamaha 700 Tenere and is ready to ride.=> Parameters are: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps. This severely adversely affects the motorcycle's handling.Note:For the safe stand of your Yamaha 700 Tenere after lowering, we recommend shortening the side stand. Scope of delivery: - Ready-to-install shock absorber -35mm.- ABE documents- Installation instructions / user manualDo you have further questions? We are happy to advise you personally, please contact us

This shock absorber is perfect for reducing the seat height (-35mm) for the Yamaha 700 Tenere. At the same time, your Yamaha 700 Tenere remains well-tuned and very suitable for touring. This shock absorber is designed for touring and riding with frequently and heavily changing loads and riding conditions or extreme requirements. The Extreme shock absorber features PDS, a hydraulic bottoming protection through the use of a second damping piston. Even under the most extreme trail conditions with full luggage, there is no bottoming out, preventing mechanical overload of the shock absorber. The damping works based on the travel. In the predominant riding operation, the shock absorber is comfortably and power-saving adjusted, before the PDS engages in the last part of the shock absorber's travel. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the Yamaha 700 Tenere.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps. This will severely impair the motorcycle's handling.Note:For the safe stand of your Yamaha 700 Tenere after lowering, we recommend shortening the side stand. Scope of delivery: - Ready-to-install shock absorber -25mm.- ABE documents- Installation instructions / user manualDo you have further questions? We are happy to advise you personally, please contact us

This Cartridge Kit Extreme is perfect for reducing the seat height (-35mm) for the Yamaha 700 Tenere. The Cartridge KIT is simply put a shock absorber for the fork and represents the absolute premium class in terms of suspension technology. The Closed Cartridge is installed in the original fork. This way, the fork bridge/handlebar mount, brakes, wheel guidance, and steering geometry remain fully intact. No additional modifications to the fork are required. This Close Cartridge is perfectly designed for touring and riding operations with frequently and heavily changing loads and riding conditions or extreme demands. This means for you: Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the Extreme adjustment range. The spring preload, rebound, and compression damping are fully adjustable from the top. The damping oil is contained in a closed cartridge, allowing for precise dosing of the oil quantity. This results in the Close Cartridge offering a significantly finer and more pleasant response behavior of the fork. The very finely adjustable damping allows for an effective, precise, and personalized suspension setup for any road condition and purpose, whether on highways, federal roads, small country roads, off-road sections, long-distance travel with large luggage, or a spirited, ambitious riding style. Should exceptionally severe road conditions affect the front wheel, the integrated "Hydraulic Endstop" prevents mechanical bottoming out of the fork.Note:For the safe stand of your Yamaha 700 Tenere after lowering, we recommend shortening the side stand. The basic setup is tailored for the demanding adventure rider with luggage. Adjustments for exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs with a spring of the appropriate spring rate and further configurations. Do you have further questions? We are happy to advise you personally, please contact us

This World Travel Edition SET is perfect for reducing the seat height (-35mm) for the Yamaha 700 Tenere. At the same time, your Yamaha 700 Tenere remains well-tuned and very suitable for touring. This Extreme Set for the Yamaha 700 Tenere is perfectly designed for touring and riding with frequently and heavily changing loads and riding conditions or extreme demands. The Extreme SET features PDS installed, a hydraulic bottoming protection through the use of a second damper piston. Even under the most extreme trail conditions with full luggage, there is no bottoming out, preventing mechanical overload of the cartridge and shock absorber. The damping works based on the travel. In the predominant riding operation, the suspension is comfortably and power-saving adjusted, before the PDS engages in the last part of the suspension travel.   Important points at a glance: - The suspension set is configured and ready to ride based on our experiences for the Yamaha Tenere 700. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - In this SET, the rear and front areas of the motorcycle are adjusted and in perfect balance.   Note: For the safe stand of your Yamaha 700 Tenere after lowering, we recommend shortening the side stand.   The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. Please use our suspension check form and send us the completed document.   Scope of delivery: - Ready-to-install shock absorber type Extreme -35mm (01-632-5871-0) - Ready-to-install cartridge kit Extreme -35mm (01-632-5876-0) - ABE documents - Assembly instructions / user manual ONLINE   Do you have further questions? We are happy to advise you personally, please contact us.