Product information "Touratech Suspension Lowering -35mm Yamaha 700 Tenere from 2019 Type Explore HP/PDS"
This shock absorber is perfect for reducing the seat height (-35mm) for the Yamaha 700 Tenere. At the same time, your Yamaha 700 Tenere remains well-tuned and very suitable for touring. More performance and comfort for your Yamaha 700 Tenere with the Touratech Suspension Shock Absorber Type Level2. The Level2 shock absorber in emulsion design can be adjusted for load adaptation to the large travel luggage via handwheel and hydraulic preload adjustment. Even with this design the PDS is installed. A hydraulic bottoming protection that prevents bottoming out even under the most extreme trail conditions with full luggage. Mechanical overload of the shock absorber is prevented. The damping works depending on the stroke. In the predominant driving operation, the shock absorber responds finely and is tuned for comfort and energy-saving.
Important points at a glance:
=> The shock absorber is configured based on our experiences for the Yamaha 700 Tenere and is ready to ride.
=> Parameters are: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
=> IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps.
This severely adversely affects the motorcycle's handling.
Note:
For the safe stand of your Yamaha 700 Tenere after lowering, we recommend shortening the side stand.
Scope of delivery:
- Ready-to-install shock absorber -35mm.
- ABE documents
- Installation instructions / user manual
Do you have further questions? We are happy to advise you personally, please contact us
Important points at a glance:
=> The shock absorber is configured based on our experiences for the Yamaha 700 Tenere and is ready to ride.
=> Parameters are: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
=> IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps.
This severely adversely affects the motorcycle's handling.
Note:
For the safe stand of your Yamaha 700 Tenere after lowering, we recommend shortening the side stand.
Scope of delivery:
- Ready-to-install shock absorber -35mm.
- ABE documents
- Installation instructions / user manual
Do you have further questions? We are happy to advise you personally, please contact us
Login