Touratech Suspension Lowering (-50mm) for BMW F800GS 2008-2012 Type *Level1*

This shock absorber is perfect for reducing the seat height (-5cm) on the BMW F800GS. At the same time, your BMW F800 GS remains well-tuned and very suitable for touring. The Level1 type shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The performance of the shock absorber allows for precise adjustment of your motorcycle's balance. In the front area of the BMW F800GS, suitable fork springs must be installed for compensation (see important notes shortly). The spring preload can be adjusted using a tool to accommodate the large travel luggage. The damping adjustment of this Level1 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort. Important notes: => The shock absorber is configured and ready to ride based on our experiences for the BMW F800GS. => Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. => The shock absorber mentioned here is designed for a rider weight of up to 100kg, including travel luggage. => For all suspension solutions, both the rear and front areas of the motorcycle should be adjusted. => The suitable component for the front of the BMW F800GS is: => Progressive fork springs, BMW F800GS *Lowering by 50mm* 01-040-7411-0 => When replacing only one component, no lowering of the motorcycle can be achieved. => IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps. *** This will severely impair the motorcycle's handling. Features of the Touratech Suspension Level1 shock absorber: => The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => Special, low-friction seals are installed. *** This leads to very low wear and a long lifespan of the shock absorber. => Stable stainless steel bushings are installed in the shock eye for the mounting screws. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads. => All components and parts are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech. *** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team. => Separation piston design. This allows the damping fluids oil and nitrogen to act separately. *** Finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, tracks). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle. => QR code on the shock absorber with individual shock absorber information. *** This allows for easy retrieval of shock-specific information by scanning with a smartphone. *** Always accessible information on the basic settings of the shock absorber. Reset possible in case of incorrect settings. If you have installed a larger tank than the original tank on your motorcycle or made modifications for additional luggage storage on your motorcycle, adjustments are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Note: BMW F800GS up to 2012 Do you have further questions? We are happy to advise you personally, please contact us.