APRILIA

The Clutch Cover gloss in carbonfiber for the Aprilia Tuono V4 / RSV4 2021 is a direct replacement for the original component.This part contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

The Clutch Cover matt in carbonfiber for the Aprilia Tuono V4 / RSV4 2021 is a direct replacement for the original component.This part contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

Whether off-road or touring - the Touratech Defensa offers reliable protection for handlebar controls and hands, ensuring that a small mishap doesn't turn into a big problem.With the Defensa, Touratech has developed an extra-robust protector for handlebar controls and hands. The construction made from high-strength aircraft aluminum is precisely tailored to your motorcycle model.Thanks to the "Defensa System," the protector offers interesting variation options. Whether pure protection bars or a wider protector with an extra attachment spoiler…Defensa hand protectors - for a particularly wide range of applications.The handlebar controls are among the most vulnerable components of a motorcycle. The solid protector reliably protects the levers from damage. The closed protectors have a bar that supports itself near the clamp blocks and at the end of the handlebar, completely surrounding the controls. This principle has proven itself under the toughest conditions on rally motorcycles.The system consists of two bolted main components and a mounting kit. There is always the necessary space behind the protector, allowing the levers to move freely. The annoying contact, especially of the clutch lever, with the protector, as known from universal products, is a thing of the past with the Defensa.The components of the Defensa are made from a high-strength, forged aluminum alloy that has proven itself in aircraft construction. With a thickness of 14 millimeters, the dimensions have been generously chosen without losing sight of the weight issue. Precision in manufacturing ensures excellent dimensional accuracy and thus a perfect fit. Additionally, forging, compared to cast or milled aluminum, provides an even stronger and more resilient structure. Thanks to the model-specific adaptation, stress-free installation is guaranteed, as is full steering lock.Easy adaptation for on- and off-road useFor pure off-road use, the Defensa "Pure" variant is recommended, where only the bar is mounted. For mixed use, there is the Defensa "Expedition," which is equipped with a wind deflector made of plastic.The plastic shell is slid over the main bar and clamped at the connection of the two aluminum components, ensuring a precise and secure fit. Those who need even more weather protection can additionally install the separately available "Extension" spoiler.Of course, the Defensa Expedition can be easily converted back to Pure.Not suitable for combination with original Aprilia heated grips.

The side fairing in carbon for the Aprilia RSV 4 (2009-2012) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

The side fairing in carbon for the Aprilia RSV 4 (2009-2012) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon frame cover is attached directly to the frame. It covers the frame and attracts attention. The frame cover is not only convincing visually. Thanks to the high surface quality of Ilmberger Carbon. the frame cover can withstand intensive use over a long period of time. This means that there are no unpleasant work marks on the rough cast surface of the frame either after countless long tours or during daily use of the motorcycle. In order to perfect the high-quality impression. the frame cover not only runs along the vertical frame strut. where the leg rubs. but also extends far upwards. where it disappears under the tight side cover. It is therefore difficult to see from the outside where the frame cover begins and where it ends. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The carbon frame cover is attached directly to the frame. It covers the frame and attracts attention. The frame cover is not only convincing visually. Thanks to the high surface quality of Ilmberger Carbon. the frame cover can withstand intensive use over a long period of time. This means that there are no unpleasant work marks on the rough cast surface of the frame either after countless long tours or during daily use of the motorcycle. In order to perfect the high-quality impression. the frame cover not only runs along the vertical frame strut. where the leg rubs. but also extends far upwards. where it disappears under the tight side cover. It is therefore difficult to see from the outside where the frame cover begins and where it ends. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The carbon frame cover is attached directly to the frame. It covers the frame and attracts attention. The frame cover is not only convincing visually. Thanks to the high surface quality of Ilmberger Carbon. the frame cover can withstand intensive use over a long period of time. This means that there are no unpleasant work marks on the rough cast surface of the frame either after countless long tours or during daily use of the motorcycle. In order to perfect the high-quality impression. the frame cover not only runs along the vertical frame strut. where the leg rubs. but also extends far upwards. where it disappears under the tight side cover. It is therefore difficult to see from the outside where the frame cover begins and where it ends. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The carbon frame cover is attached directly to the frame. It covers the frame and attracts attention. The frame cover is not only convincing visually. Thanks to the high surface quality of Ilmberger Carbon. the frame cover can withstand intensive use over a long period of time. This means that there are no unpleasant work marks on the rough cast surface of the frame either after countless long tours or during daily use of the motorcycle. In order to perfect the high-quality impression. the frame cover not only runs along the vertical frame strut. where the leg rubs. but also extends far upwards. where it disappears under the tight side cover. It is therefore difficult to see from the outside where the frame cover begins and where it ends. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The carbon frame cover is attached directly to the frame. It covers the frame and attracts attention. The frame cover is not only convincing visually. Thanks to the high surface quality of Ilmberger Carbon. the frame cover can withstand intensive use over a long period of time. This means that there are no unpleasant work marks on the rough cast surface of the frame either after countless long tours or during daily use of the motorcycle. In order to perfect the high-quality impression. the frame cover not only runs along the vertical frame strut. where the leg rubs. but also extends far upwards. where it disappears under the tight side cover. It is therefore difficult to see from the outside where the frame cover begins and where it ends. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The carbon frame cover is attached directly to the frame. It covers the frame and attracts attention. The frame cover is not only convincing visually. Thanks to the high surface quality of Ilmberger Carbon. the frame cover can withstand intensive use over a long period of time. This means that there are no unpleasant work marks on the rough cast surface of the frame either after countless long tours or during daily use of the motorcycle. In order to perfect the high-quality impression. the frame cover not only runs along the vertical frame strut. where the leg rubs. but also extends far upwards. where it disappears under the tight side cover. It is therefore difficult to see from the outside where the frame cover begins and where it ends. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The carbon frame cover is attached directly to the frame. It covers the frame and attracts attention. The frame cover is not only convincing visually. Thanks to the high surface quality of Ilmberger Carbon. the frame cover can withstand intensive use over a long period of time. This means that there are no unpleasant work marks on the rough cast surface of the frame either after countless long tours or during daily use of the motorcycle. In order to perfect the high-quality impression. the frame cover not only runs along the vertical frame strut. where the leg rubs. but also extends far upwards. where it disappears under the tight side cover. It is therefore difficult to see from the outside where the frame cover begins and where it ends. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The sprocket cover is one of the most underrated components on the whole motorcycle. Installed centrally on the motorcycle. it surrounds the chain sprocket and does more than it might seem at first glance. It protects the engine and many other components from flying grease while driving. This is particularly stubborn as dirt and difficult to remove from the soft surface of the original part. A hard surface. as it occurs with high-quality carbon. is more suitable here. The component can utilize its full potential not only technically. but also optically. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The sprocket cover is one of the most underrated components on the whole motorcycle. Installed centrally on the motorcycle. it surrounds the chain sprocket and does more than it might seem at first glance. It protects the engine and many other components from flying grease while driving. This is particularly stubborn as dirt and difficult to remove from the soft surface of the original part. A hard surface. as it occurs with high-quality carbon. is more suitable here. The component can utilize its full potential not only technically. but also optically. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The front fairing in carbon for the Aprilia RSV 4 (2009-now)is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. This Carbonpart can be supplied for an additional charge of 10% in glossy finish.

The front fender in carbon for the Aprilia RSV 4 (2009-now) / Tuono V4 (2011-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. This Carbonpart can be supplied for an additional charge of 10% in matte finish.

The front Mudguard gloss in carbonfiber for the Aprilia Tuono V4 / RSV4 2021 is a direct replacement for the original component. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The front Mudguard in matte in carbonfiber for the Aprilia Tuono V4 / RSV4 2021 is a direct replacement for the original component. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

Griffschutz für Aprilia Caponord 1200 / Rally von Hepco&Becker Sowohl bei der Fahrt im Gelände als auch auf Asphalt gewährleistet der Hepco&Becker Griffschutz einen zuverlässigen Schutz der Hände des Fahrers und des Motorradlenkers. Modellspezifischer Handprotektoren-Schutzbügel für deine Aprilia Caponord 1200 / Rally - Genau auf dein Motorrad angepasste Stahlrohrkonstruktion für den perfekten Look. Ideal für alle Adventure Bikes, um die Handprotektoren zu stabilisieren und vor z.B. Bruch bei einem Umfaller oder Bekanntschaft mit einem größeren Ast zu schützen! Zuverlässiger, robuster Schutz der Lenkerarmaturen bei Stürzen mit optimaler Aerodynamik. Individuell wie Du - Mach es zu deinem Bike! Details & Eigenschaften: Material: Stahlrohr, Verarbeitung made in Germany Oberflächenfinish: Hochwertige, farblich passende Pulverbeschichtung Farbe: schwarz Für Baujahre: 2013-2016 Lieferumfang: 1 Satz Griffschutzbügel (links & rechts) Vollständiger Satz Montagematerial Zweisprachige, bebilderte Montageanleitung Wichtige Hinweise: Die auf den Bildern gezeigten Kunststoff-Handprotektoren gehören zum Lieferzustand des Motorrads, sie sind NICHT enthalten! Bitte beachten Sie die die in der Montageanleitung und den Eigenschaften aufgeführten modellspezifischen Hinweise! Unsere modellspezifischen Produkte sind, sofern nicht explizit anders angegeben nur für den Serienzustand der Motorrads entwickelt! Passt eventuell nicht in Kombination mit nicht-originaler Lenkerklemmung, z.B. bei Komfortlenker oder Lenkererhöhungen! Aus Sicherheitsgründen sollten alle Schutzbügel nach einem Sturz ausreichend kontrolliert und ggf. ersetzt werden.

Workshop grip protectors to protect the motorcycle grips. Material: Neoprene.

Standfest. Stabil. Einfach zu bedienen. Die Hauptständer von Hepco&Becker schränken die Schräglagenfreiheit beim Fahren meist nicht ein und sind extrem robust. Dank ausgefeilter Geometrie und rutschfester Trittfläche ist es ganz einfach in jeder Situation das Motorrad sicher abzustellen.Die präzise gefertigten Ständer sind sehr stabil, sandgetrahlt, grundiert und schwarz pulverbeschichtet und daher wetter- und wertbeständig. Hauptständer vereinfachen Wartungsarbeiten und sorgen für einen sicheren Stand, z.B. beim Tanken. Beim Überwintern entlasten sie die Federelemente und das Hinterrad.ABE wird mitgeliefertmeist keine Einschränkung der Schräglagenfreiheithochwertiges OberflächenfinishLieferumfang: Hauptständer+ Montagematerial + Anleitungbitte beachten Sie die hinterlegte AnbauanleitungHilfreiches Werkzeug zum Einhängen der Zugfeder: Artikelnummer: 700030

Standfest. Stabil. Einfach zu bedienen. Die Hauptständer von Hepco&Becker schränken die Schräglagenfreiheit beim Fahren meist nicht ein und sind extrem robust. Dank ausgefeilter Geometrie und rutschfester Trittfläche ist es ganz einfach in jeder Situation das Motorrad sicher abzustellen.Die präzise gefertigten Ständer sind sehr stabil, sandgetrahlt, grundiert und schwarz pulverbeschichtet und daher wetter- und wertbeständig. Hauptständer vereinfachen Wartungsarbeiten und sorgen für einen sicheren Stand, z.B. beim Tanken. Beim Überwintern entlasten sie die Federelemente und das Hinterrad.ABE wird mitgeliefertmeist keine Einschränkung der Schräglagenfreiheithochwertiges OberflächenfinishLieferumfang: Hauptständer+ Montagematerial + Anleitungbitte beachten Sie die hinterlegte AnbauanleitungHilfreiches Werkzeug zum Einhängen der Zugfeder: Artikelnummer: 700030

The Heel Guard left rear matt in carbonfiber for the Aprilia Tuono V4 / RSV4 2021 is a direct replacement for the original component.This part contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality