Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: gold with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

BMW C 1 125 200 Brake Disc Front or Rear Original BMW Brake Disc for the BMW C1 Scooter It fits the C1 125 and C1 200 front or rear

BMW Original Spare Part Air Filter Insert Top Brand Quality

SV - Friction MaterialFull metallic sintered material with special coating.High friction coefficient guarantees very good performance.Can be used on almost all discs.Only in exchange for sintered materials in the original equipment.Only conditionally suitable for racing, as it has no heat resistance above 400 degrees.Only suitable for the front axle.

SH - Friction MaterialFull metallic sintered material with special coating.High friction coefficient, guarantees very good performance.Can be used on almost all discs.Only available as a replacement for sintered materials in the original equipment.Only conditionally suitable for racing, as it has no heat resistance above 400 degrees.Tuned to the friction coefficient of the SV material.Only suitable for the rear axle.

BMW C 600 Sport C 650 GT C 650 Sport Chrome Handlebar Weight This offer includes 1 chrome handlebar weight for the BMW scooter C600Sport and C650GT. The weight is easily replaced at the end of the handlebar.

BMW Original Spare Part Air Filter Insert Top Brand Quality

JMP Connector Slotted Nut used in the following vehicles: BMW E21, E30, E36, E46, E12, E28, E34, E39, E24, E23, E38, E65, E66, E31, X3, X5, Z3, Z4 MERCEDES BENZ 170, W201, W124, T1 Bus (601, 602), W211, W461, W140, W203 Thread: M8x1.25 Wrench Size: 12.0 mm Contents: 10 Packaging Unit: 1Technical Data:Type: Thermag Slotted Nuts For Thread Size: M8 x 1.25 Self-locking: Yes Wrench Size / SW: 12.0 mmMaterial: Steel Surface: Copper-plated

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals.

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

The two front right and left crash pads for the BMW C 600 Sport Scooter (2012-present) provide the best possible protection for the areas at risk during falls. The package includes crash pads for both the right and left sides of the vehicle. The crash pads on the frame enhance the vehicle and provide additional protection against damage. The installation of the parts is done using the included adhesive strips. The carbon part has been completely manufactured from prepreg material (see FAQ) in an autoclave according to the latest guidelines and, as is customary with us, has been coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But the coating not only excels technically; it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The two-part front fender for the BMW C 600 Sport (2012-present) in carbon replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness. The carbon part has been completely manufactured in the autoclave from prepreg material (see FAQ) according to the latest guidelines and, as is customary for us, has been coated with a clear plastic layer in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The carbon license plate holder for the BMW C 600 Sport Scooter (2012-present) replaces the original part using the original mounting points. It is significantly shorter and higher than the original part. This makes the rear of the motorcycle appear even slimmer and sportier. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness. The carbon part has been completely manufactured in the autoclave according to the latest guidelines from prepreg material (see FAQ) and, as is customary with us, has been coated with a clear plastic layer for protection against environmental influences in the next step. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals.

BMC Replacement Air Filter   The acquired know-how from the racetracks is directly incorporated into the production of the series filters, to provide the demanding motorcyclist with a product that is tested, delivers performance, and is in a constant state of evolution.   The materials used are the best currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made from a special cotton fabric (4 layers), soaked in a low-tack oil.   It is encased in an aluminum mesh that is treated with an epoxy solution to be resistant to gasoline vapors and oxidation. Additionally, the cotton has the advantage of being washable and reusable.   Due to these features, the BMC sport air filters (replacement air filters) guarantee a higher airflow compared to the original paper filters, a minimal pressure loss of the incoming air, and thus lead to better engine performance.   - Durability: washable and reusable, no replacement needed - Wider filter surface - Maximum air permeability (4 layers of cotton) - Higher absorption and filtration - Better pressure drop ratio - Tested by international testing procedures

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to its construction from high-quality aluminum combined with a steel base carrier, the Easyrack offers high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case attachment can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load capacity (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but rather in the side cases or tank bag. Recommended maximum speed: 130 km/h Designed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals.

Dual USB Charger Type A Conveniently charge mobile devices while riding. Output voltage: 5 V, max. charging current: 2 x 2 A. Overheating protection, LED standby indicator.

EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

SH - Friction MaterialFull metallic sintered material with special coating.High friction coefficient, guarantees very good performance.Can be used on almost all discs.Only available as a replacement for sintered materials in the original equipment.Only conditionally suitable for racing, as it has no heat resistance above 400 degrees.Friction coefficient matched to the SV material.Only suitable for the rear axle.

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are offered. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand installation instructions scope of delivery: right + left including mounting materials and instructions please refer to the provided installation instructions or vehicle-specific notes for any restrictions or warnings no ABE or registration required

Two-sided luggage rack for various Hepco&Becker side cases such as Junior or Xplorer. The standard side case racks from Hepco&Becker are securely bolted to the motorcycle. All standard hard-shell cases from Hepco&Becker fit onto these racks. The cases are attached to the rack using a quick-release mechanism. An aluminum adapter is also required, which is usually included with the case. (Item number: 700114) This aluminum adapter is bolted to the rear right and left of the rack and provides the attachment for the case lock.The model-specific racks are solidly designed and provide effective protection for the rider's or passenger's legs in case of a fall.The side case racks from Hepco&Becker can usually be combined without issues with a tubular luggage bridge or other rear racks from our range. Please refer to the installation instructions for details. Construction from steel tubing securely bolted to the motorcycle Indicators usually remain in their original position but may sometimes need to be repositioned (please refer to the installation instructions for the product) Recommended load: 10kg per side case (please observe model-specific notes from the motorcycle manufacturers or notes in the installation instructions) right + left including mounting materials and instructions Luggage racks do not require ABE or registration

Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our topcases. But not only new topcases fit. Older Hepco&Becker models can also be mounted. The base mount has not changed.Not compatible are: Hepco&Becker Orbit Topcase and topcases with universal plate.The carriers are model-specific and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With the high-quality coating and proper care, the look is also preserved in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the topcase, but in the side cases or tank bag. usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions) including mounting materials and instructions MADE IN GERMANY the topcase is pushed onto the tube luggage rack and locked to the carrier with a metal locking mechanism Luggage racks generally do not require ABE or registration Vehicle-specific notes: Our luggage rack is mounted on the original rack. The topcases equipped with a metal locking mechanism from HEPCO&BECKER can be attached to it. Example image!!!

BMW Original Spare Part Air Filter Insert Top Brand Quality

SI - Friction MaterialFull metallic with corrosion-resistant coating.Good durability even in wet conditions.Solid friction coefficient behavior.Versatile use in off-road conditions.Suitable for both front and rear axles.