JMP Valve Caps   - made from CNC machined aluminum - silver - including sealing ring   Dimensions L x W: 21 x 10 mm   Packaging unit 2 pieces Price per pair  

JMP Valve Caps   - made from CNC machined aluminum - silver - including sealing ring   Dimensions L x W: 15 x 10 mm   Packaging unit 2 pieces Price per pair  

For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

Angeboten wird hier ein GebrauchtteilFahrzeug: C400X, C400GT Hersteller: BMWNeupreis: 49,91 € Zustand: normale Gebrauchsspuren, 1 leichter Kratzer, siehe Bilder Beschreibung: wird verkauft wie abgebildetTeilenummer: 46639467909

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Fully insulated bike battery disconnect switch for disconnecting the onboard network to preventdeep discharge of the battery due to constant consumers like clock, onboard computer,accessories, etc. during longer standstill periods.Disconnection is achieved simply by loosening the screw.Just loosen the screw by 1-2 turns and leave it in the switch. This way, it cannot be lost.For driving operation, please tighten it properly. Mini designFully insulated housingFlexible mounting between negative terminal and vehicle Load max. 160A - 12V / 10 sec. then pause for 30 sec.Bridge cable included.Installation instructions on product insert Dimensions:L / W / H: 62 x 25 x 38 mmCable: 200 mm

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

JMP Valve Caps   - made from CNC machined aluminum - black anodized - including sealing ring   Dimensions L x W: 15 x 10 mm   Packaging unit 2 pieces Price per pair  

Waterproof hand guards made of synthetic leather and neoprene with reflective elements for increased safety. The interior is equipped with thermal lining, allowing for better heat retention. Your hands stay warm.Quick and easy installation: suitable for all handlebars with handlebar ends. Features:• quick and easy installation• hassle-free access to controls • Material: synthetic leather and neoprene• durability through UV protection• increased safety through reflective elements• waterproof coating• warm fur lining• includes backpack bag   Dimensions: 50x26x36.5cm 59000

EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

SH - Friction MaterialFull metallic sintered material with special coating.High friction coefficient, guarantees very good performance.Can be used on almost all discs.Only available as a replacement for sintered materials in the original equipment.Only conditionally suitable for racing, as it has no heat resistance above 400 degrees.Friction coefficient matched to the SV material.Only suitable for the rear axle.

SI - Friction MaterialFull metallic with corrosion-resistant coating.Good durability even in wet conditions.Solid friction coefficient behavior.Versatile use in off-road conditions.Suitable for both front and rear axles.

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

Hiflo Premium Oil Filter   The Hiflo Premium Oil Filters provide optimal benefits for the customer and impress with the best quality. Only high-quality materials are used in the manufacturing of the filters.   As the only filter manufacturer, Hiflo has its filters tested and certified by TÜV Süddeutschland. The filters are compared with the original filter in all relevant criteria. The test can only be passed successfully if the Hiflo filter meets or exceeds the values of the original filter. This ensures that all filters meet the quality requirements of the original equipment.   Hiflo also offers the largest range of filters for motorcycles and ATVs.

JMP Bolt Valve Cap With these pretty little tire valve covers, dirt stays out and an airtight seal is ensured. Universally suitable for cars and motorcycles.   Material: Anodized aluminum in color

JMP Professional Adhesive Weight Remover   Ideal for removing adhesive weights, protective strips, labels, adhesive and type plates Solvent resistant Can be sharpened with a file No damage to surfaces Blade width 38 mm            

JMP Skan Monitor 2 Battery monitoring with your smartphone   “Not suitable for lithium batteries.”   With the JMP Skan Monitor 2 and the new free Apple or Android app “JMP BatteryMonitor II”, you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed.   The positive charge status also prevents potential early damage or failure of the battery. Through continuous recording, the charge status of the battery is captured during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. A defective regulator can be quickly recognized.   Additionally, with the new app, starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.) can be accurately checked. This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved.   The transmitter is suitable for 12 V batteries.The range is approximately 10 meters.The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5)   The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs.   Please note: The new JMP Skan Monitor 2 requires the new app “JMP BatteryMonitor II”! If the minimum voltage is not met, a reminder to recharge the battery soon will be issued.- Easy attachment using eyelets to the battery- Power consumption only about 2 mA- No damage to the transmitter or battery occurs in case of reverse polarity- Free app available for download in the Apple App Store or Google Play Store under JMP Battery Monitor II- Voltage recording also during the ride. Results can be sent via email. File display in Excel is possible.                

RSI BelagmischungVollmetallisch .Höherer than SI mixture .Also Super with anticorrosion paint .Agressiver coefficient of friction, very high braking performance - Moto used .For the front and rear axle can be used.

Die Festscheiben der Brembo Oro-Serie werden in einem Guss aus Edelstahl hergestellt. Die Fertigung entspricht hierbei den strengen Toleranzen im Bezug auf die Konstruktions- und Bauart. Durch die Bearbeitungszyklen wird eine maximale Eignung und Rundlaufsicherheit gewährleistet.   Brembo konnte aufgrund seiner umfangreichen Erfahrung die geeigneten Formen, Toleranzen und Größen für jeden Motorradtyp und Einsatz bestimmen. Tatsächlich verbessert die spezielle Formgebung der Brembo-Scheiben durch eine sorgfältige Untersuchung der Bearbeitungstoleranzen die Übertragung des Bremsmoments und bietet gleichzeitig eine verbesserte Resistenz gegen mechanische und thermische Belastungen.

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

SR Sintermetall Racing Brake Pads for Front   This is a material that remains very stable under all operating conditions. With high braking performance in hot conditions and a good coefficient of friction in cold conditions, it is also suitable for fast road use, making it ideal for motorcycles that are used both on the road and on the racetrack.

Motorcycle handlebar mitts. Color black. Suitable for various motorcycle models.

Angeboten wird hier ein Gebrauchtteil Fahrzeug: C 400 X Hersteller: BMW Zustand: kaum Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 63148566869Nummmer auf dem Bauteil: 63147108412