JMP Valve Caps   - made from CNC machined aluminum - silver - including sealing ring   Dimensions L x W: 15 x 10 mm   Packaging unit 2 pieces Price per pair  

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

JMP Valve Caps   - made from CNC machined aluminum - black anodized - including sealing ring   Dimensions L x W: 15 x 10 mm   Packaging unit 2 pieces Price per pair  

Waterproof hand guards made of synthetic leather and neoprene with reflective elements for increased safety. The interior is equipped with thermal lining, allowing for better heat retention. Your hands stay warm.Quick and easy installation: suitable for all handlebars with handlebar ends. Features:• quick and easy installation• hassle-free access to controls • Material: synthetic leather and neoprene• durability through UV protection• increased safety through reflective elements• waterproof coating• warm fur lining• includes backpack bag   Dimensions: 50x26x36.5cm 59000

JMP Bolt Valve Cap With these pretty little tire valve covers, dirt stays out and an airtight seal is ensured. Universally suitable for cars and motorcycles.   Material: Anodized aluminum in color

JMP Professional Adhesive Weight Remover   Ideal for removing adhesive weights, protective strips, labels, adhesive and type plates Solvent resistant Can be sharpened with a file No damage to surfaces Blade width 38 mm            

JMP Skan Monitor 2 Battery monitoring with your smartphone   “Not suitable for lithium batteries.”   With the JMP Skan Monitor 2 and the new free Apple or Android app “JMP BatteryMonitor II”, you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed.   The positive charge status also prevents potential early damage or failure of the battery. Through continuous recording, the charge status of the battery is captured during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. A defective regulator can be quickly recognized.   Additionally, with the new app, starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.) can be accurately checked. This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved.   The transmitter is suitable for 12 V batteries.The range is approximately 10 meters.The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5)   The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs.   Please note: The new JMP Skan Monitor 2 requires the new app “JMP BatteryMonitor II”! If the minimum voltage is not met, a reminder to recharge the battery soon will be issued.- Easy attachment using eyelets to the battery- Power consumption only about 2 mA- No damage to the transmitter or battery occurs in case of reverse polarity- Free app available for download in the Apple App Store or Google Play Store under JMP Battery Monitor II- Voltage recording also during the ride. Results can be sent via email. File display in Excel is possible.                

JMP Connector Expansion Rivet compatible with the following vehicles: AUDI A6, S6 BMW E81, E82, E87, E88, E36, E46, E90, E91, E92, E93, E34, E39, E60, E61, E65, E66 F01, F02, X5, X6, Z4 CITROEN BX, Xantia, ZX PEUGEOT 307, 406, 806, Expert, 1+2, Partner SEAT Leon `04 for hole Ø min. (mm): 5.0for hole Ø max. (mm): 5.5Head diameter (mm): 10.0Height 1 (mm): 11.5Height 2 (mm): 23.5 Installation side: wheel sideInstallation side: interior trim Material: plasticColor: black Contents: 10 Packaging unit: 1 Technical Data:Application: Motorcycle Car Vehicle Manufacturer: Audi BMW Citroen Mercedes Benz Peugeot Renault Seat VAG VW Type: Expansion Rivets Hole Diameter: 5.0 mmSupport Diameter: 10.0 mmInstallation Length: 11.5 mmMaterial: Plastic suitable for: 5.0 mm hole

Diagnostic device for motor vehicles and motorcycles. A diagnostic system with an intuitive and easy-to-understand user interface in 10 languages. The simple symbol-based menu structure helps the user complete their tasks quickly and reliably. With extensive functions and special features, the user has access to a unique diagnostic system. The diagnostic device is indispensable in a modern automotive/motorcycle workshop.Supported control units:Engine electronics / Engine control unit CDICentral electronics / Chassis electronics BCMInstrument cluster / SpeedometerTire pressure monitoring RDKSABS – Anti-lock braking systemTheft warning system / Alarm systemRadio / MultimediaRadio control unitElectric hydraulic tilt standBattery management system BMSIntegrated power supply control module ICSMElectric power steering EPSElectronic throttle control EPTExhaust flap control FCEKeyless GO systemLED headlightsAutomatic transmission / Transmission controlTraction controlAirbagDiagnostic functions / Diagnostic capabilities:Service reset / Service Reset / DESMO / OilRead and clear complete fault memoryKey programmingAdjust fuel injection systemUnlock immobilizerAdjust / Adapt throttle valveSet date and time, e.g., after battery replacementReset adaptation valuesSpecific actual/target values / Live DataRead current mileage and softwareRead chassis numberValve clearance service resetBleed ABS pressure modulator / Bleeding test from the ABS hydraulic systemInitialize brake wear indicatorCalibrate windscreenESA/SAF shock absorber calibrationStepper adjustmentCalibration: height sensor, windscreen, idle actuator, film sensor, etc…Sensor adjustment, e.g., exhaust flap, interference pipe flap, reverse assistance adjustment, speed sensor, transmission, idle actuator, lambda sensors, etc.Actuator diagnosis, e.g., fan, fuel injector, valvesTire pressure sensor RDC learning – programming – initializingNo limitations or restrictions on modelsTechnical specifications:3.5-inch IPS color display with high resolutionRobust housing with ergonomic gripsGraphical user interface with clear symbolsElongated metal dome buttons on membrane keyboardRubber-protected housingOperation without battery, power supplied by the machineUpdate via USB-C standard cableSoftware updates occur automatically via Windows softwareDimensions L/W/H 17x11x4cm Weight 300gSpecial functions: *Service reset date / mileageSet date and time, e.g., after battery replacement Reset adaptation values for the engine control unitSpecific actual valuesRead current mileageRead chassis numberValve clearance service resetBleed ABS pressure modulatorCalibrate idle actuatorInitialize brake wear indicatorCalibrate windscreenESA/SAF calibrationStepper adjustmentCalibration: height sensor, windscreen, idle actuator, film sensor, etc…Sensor adjustment: exhaust flap, interference pipe flap, reverse assistance adjustment, speed sensor, transmission, idle actuator, lambda sensors. Actuator diagnosisNo limitations or restrictions on models*(These functions are not available for all models, engine variants, and control units.)Supported protocols:KWP-2000 SpecificCAN-BUS SpecificUDS SpecificWhich models are supported?All models from Euro 4 are equipped with the OBD-2 connector at BMW. Approximately from 08.2016M1000RRS1000RRR1250RSK1600GTK1600GTLK1600BK1600 Grand AmericaR1250 RTS1000RR1250RF900RG310RR18R nineT / Pure / Urban ScramblerR1250GSS1000XRF900XR F850GSF750GSG310GSC400Supported control units:Engine electronics from Motronic 2.4Central electronicsInstrument clusterTire pressure monitoring ABS anti-lock braking system from I-ABSTheft warning system RadioFunction satelliteActive headlightsESA electric shock absorber adjustmentSAF semi-active suspensionAccess systemTelematics moduleAudio platformBody controllerSideview assistChassis electronicsElectric hydraulic tilt standsScope of delivery:Diagnostic device including 1 license for BMW, OBD-2 diagnostic cable, manual, and bag.

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 8 546 386 is used on the following vehicles:

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

JMP Gabeldichtringe – NOK für höchste Ansprüche   NOK Gabeldichtringe von JMP bieten eine exzellente Abdichtung bei gleichzeitig geringer Reibung – ideal für alle, die auf hochwertige Material und lange Haltbarkeit setzen. Die Dichtringe bestehen aus hochwertigem Elastomer-Material mit exakter Dichtlippengeometrie. Dadurch bleibt das Gabelöl zuverlässig im Inneren, während Wasser, Schmutz und Staub draußen bleiben. Perfekt für alle, die ihre Gabel dauerhaft leistungsfähig und dicht halten möchten – ob im Alltag, auf Tour oder bei sportlicher Beanspruchung.   Vorteile der JMP Gabeldichtringe (NOK-Qualität): • NOK-Spezifikation • Hervorragende Dichtwirkung bei gleichzeitig minimaler Reibung • Widerstandsfähig gegen Öl, UV, Schmutz und Temperaturwechsel • Exakte Passform – einfacher Einbau, zuverlässige Funktion • Langlebig, wartungsarm und ideal für anspruchsvolle Fahrer Die perfekte Wahl für alle, die keine Kompromisse bei Material und Funktion eingehen möchten – JMP Gabeldichtringe in NOK-Qualität stehen für Leistung, Präzision und Schutz auf höchstem Niveau

Motorcycle handlebar mitts. Color black. Suitable for various motorcycle models.

n.v.

For use of the Duonix Bikescan-100 with the OBD-II interface on BMW motorcycles.

With the comfortable backrest for the 35-liter top case, the passenger enjoys more comfort both on short trips and long tours. Increased passenger comfort. Reduces fatigue on long distances. Specifically designed for the 35-liter top case. Perfectly matched to the design of the top case.

The stable luggage rack with an appealing design allows for the reliable attachment of the top case or other larger luggage items. Optionally, a backrest can also be attached to it, providing additional comfort for the passenger. Additionally, it serves as a full-fledged grab handle and can also be used as a push aid when maneuvering. Thanks to its design in white aluminum, it fits perfectly with the top case and looks great on any scooter. High-quality transport option for larger luggage items. Perfectly tailored for the BMW top case. Simultaneous installation of the backrest possible. Stable, torsion-resistant construction. Color: White aluminum, black. Without mounting parts! Scope of delivery: Delivery includes installation instructions

The lightweight, compact first aid kit from BMW Motorrad fits into any motorcycle and contains a basic supply for treating minor injuries. In addition to a variety of band-aids and disposable gloves, it also includes skin cleansing wipes, a quick bandage, and a rescue blanket in a water-repellent nylon bag. Its signal red color makes the first aid kit highly visible, ensuring it is quickly accessible in case of an emergency. A truly helpful companion that fits in any Flexcase and should not be missing from any motorcycle. Basic supply for minor injuries. Water-repellent zippered nylon case. Contents: Variety of band-aids Quick bandage (size 2) Skin cleansing wipes Disposable gloves Rescue blanket

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to work together. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free can it operate optimally!

The 12V socket allows electronic devices to be connected to the vehicle's electrical system. An example of this is the BMW USB charger, which can charge and operate mobile phones and MP3 players with the appropriate interface even while riding. 12V on-board socket. Charging option for electronic devices. Use while riding is also possible.

The touring windscreen is coated on both sides with a scratch-resistant finish, ensuring excellent visibility even after many kilometers on the road. It is approximately 20 cm taller than the standard windscreen and provides maximum wind and weather protection for both the rider and passenger, while simultaneously minimizing air turbulence. Thanks to its aerodynamically optimized shape, the screen remains flutter-free even at high speeds and reduces annoying riding noises to a minimum. Especially on long tours, it allows for particularly fatigue-free riding, enabling the rider to enjoy every single kilometer in a more relaxed manner. Approximately 20 cm taller than the standard windscreen. Scratch-resistant coating on both sides. Excellent aerodynamic properties. Flutter-free even at high speeds.

Reliable Weather Protection: The outdoor cover protects the vehicle from moisture, dirt, and other environmental influences even when exposed to the elements. The high-quality nylon cover is waterproof and features ventilation openings as well as a large viewing window in the license plate area. Drawstrings ensure optimal fixation of the cover to the vehicle, and the two metal eyelets at the front can be used for theft protection. Additionally, the integrated pocket is practical for storing the cover when not in use. The black cover is adorned with a large silver BMW Motorrad logo and is suitable for many BMW motorcycles. Reliable weather protection. Practical handling. Material: Nylon with waterproof PU coating