Fahrzeugspezifische Information:  Plattenfilter   Ansaugstutzen   Originalersatzteil

Angeboten wird hier ein Neuteil Fahrzeug: R80RT R100RT K100LT K100RT K75RT Hersteller: BMW Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet

The Arizona touring screen is an extra tall touring screen.

Athena Gasket   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Angeboten wird hier ein Gebrauchtteil Fahrzeug: K48 K1600GT Hersteller: BMW Zustand: normale Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer Teilenummer: 46717717504

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Badge Emblem Logo D=45 mm BMW Full Fairing for example R90S Topcase F650GS... Additional Information The part with the BMW part number 52 53 2 325 201 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 7 686 746 is used on the following vehicles:    

Original BMW Spare Part / Accessory Diameter 21 mm

Original BMW Spare Part / Accessory Diameter 41 mm

Ball Bearing

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

Battery Rubber Holder

Battery Strap Total Length: 200 mm

Quality ball bearings from SKFTechnical Data:Design:   Deep groove ball bearing Type:   6005 Inner diameter:   25.00 mmOuter diameter:   47.00 mmWidth:   12.00 mmSealing:   2 sealing discs Clearance:   Increased clearance (C3)

Original BMW Bellows Rear Swingarm BMW Part Number: 33171452504

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

QUICK & EASY DROP-IN INSTALLATION Spüren Sie den Leistungsunterschied! ENTWICKELT, UM DIE LEISTUNG ZU VERBESSERN UND LANGLEBIGKEIT ZU GARANTIEREN. Entwickelt und konstruiert für einen problemlosen Betrieb von mehr als 2.500 Stunden oder 100.000 Meilen. Verbesserte Polymere, Bürsten und Kommutatoren garantieren einen gleichmäßigen Durchfluss, eine gleichmäßige Stromaufnahme und einen leisen Betrieb. Ersetzt die BMW Teilenummer 16141341231.  

Bellows for Rear Swingarm

BMW 38mm Stainless Steel Header Set WITHOUT Interference Pipe for R 80, R 80RT, R 100 RS, R100 RT Monolever Models from '85 HATTECH STAINLESS STEEL - Polished header system with 38mm header diameter HATTECH STAINLESS STEEL 38mm Header suitable for models WITH and WITHOUT oil cooler no additional modifications necessary WITHOUT Interference Pipe with cutout for oil thermostat Available in various surface options:              untreated / uncut surface               brushed              polished              brushed & heat-colored at the welds