BMC Tauschluftfilter   Das erworbene Know-how auf den Rennstrecken wird direkt in die Produktion der Serienfilter eingebracht, um dem anspruchsvollen Motorradfahrer ein Produkt zu bieten, das erprobt ist, Leistung bringt und sich in einer ständigen Evolution befindet.   Die verwendeten Materialien sind die besten, die momentan auf dem Markt verfügbar sind. Die Filter werden aus einem einzigen Gummirahmen hergestellt, um eventuelle Brüche zu verhindern. Das filtrierende Element ist aus einem speziellen Baumwollgewebe (4 Lagen), getränkt in einem Öl mit geringer Klebrigkeit.   Es wird umfasst von einem Aluminiumnetz, das mit einer Epoxidlösung behandelt ist, um gegen die Benzindämpfe und der Oxidation resistent zu sein. Zudem hat die Baumwolle den Vorteil auswaschbar und wieder verwendbar zu sein.   Durch diese Merkmale garantieren die BMC-Sportluftfilter (Tauschluftfilter) einen höheren Luftdurchsatz gegenüber den original verwendeten Papier-Filtern, einen minimalen Druckverlust der eintretenden Luft und führen somit zu einer besseren Leistung des Motors.   - Haltbarkeit: waschbar und wieder verwendbar, kein Ersatz nötig - Breitere Filteroberfläche - Maximale Luftdurchlässigkeit (4 Lagen Baumwolle) - Höhere Absorption und Filterung - Besseres Druckabfall-Verhältnis - Geprüft durch internationale Testverfahren

The original K & N air filter. The K & N air filters are easily replace the standard air filter. It required no changes to the system. The standard setting the carburetor does not need to be changed. results from using K & N air filters no loss of power, on the contrary, because the potential of the air box is optimized. undAbgasvorschriften noise are complied with. K & N filter have the same life span as the motors and allow substantial savings in filter purchase. The unique filter system can extend the life of the motors undschützt optimally against dangerous dust, sand, etc. K & N filters are fully washable permanent filter with little maintenance recovery and can be used again without any loss of filter efficiency and air flow. - High airflow with excellent filtration - Developed to increase horsepower and acceleration - washable and reusable - Economical; K & N filter holds over the entire life of the Motors products maintenance interval; up to 80,000 km, before cleaning is required depending on road use - Compatible with OEM Vehicle Electronics - Environmentally friendly

n.v.

Thermostat

Thermostat Original spare part

Vehicle-Specific Information: High HandlebarOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.

Vehicle-Specific Information: High HandlebarOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.

JMP Throttle Cable Distributor   Outer Diameter: 16mm Total Length without Rubber Cap: 73mm Stroke: 46 mm

Vehicle-Specific Information:  below

n.v.

Vehicle-Specific Information: High HandlebarOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides permanent lubrication and does not dry out. The shafts glide in a durable calcium grease.

Vehicle-specific Information: High handlebars

Throttle Grip

Throttle Grip

Throttle Grip

Throttle Grip

Throttle Valve Spring

  Clip

Timing Chain Guide

  Chain Tensioner   Original Spare Part

This revolutionary new device effortlessly installs mushroom-shaped rubber plugs in all tubeless tires while the tire can remain on the rim. With the help of the "Tire Repair Kit" and the included hex key, the plug is twisted into the hole. The plug expands under pressure, filling the punctured area. A strong pull on the shaft of the plug with pliers ensures a secure fit of the mushroom head against the inner wall of the tire, preventing any air from escaping. This technology guarantees maximum reliability and reduces your repair times in any situation.Only suitable for tubeless tires!Scope of delivery:- "Tire Plugger"- Adapter- Needle (with handle)- Rasp (with handle)- Hex key- 15 x plugs- Blade (foldable)- Bag- Fabric zipper bag (16 x 10 x 5 cm)Caution: Emergency repair kit!

  Topend Gasket Set Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949.   In the off-road world, the Athena pool of engineers and technicians collaborates with leading international teams from MXGP and AMA Supercross to develop new product lines.   Athena products undergo rigorous quality testing to guarantee customers high standards in terms of performance, competitiveness, and reliability.   Athena offers the largest selection of replacement gaskets and gasket sets available on the market, with over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs.

  Topend Gasket Set Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949.   In the off-road world, the Athena pool of engineers and technicians collaborates with leading international teams from MXGP and AMA Supercross to develop new product lines.   Athena products undergo rigorous quality testing to guarantee customers high standards in terms of performance, competitiveness, and reliability.   Athena offers the largest selection of replacement gaskets and gasket sets available on the market, with over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs.