JMP Oil Temperature Direct Meter / Analog Display   The original oil filler screw must be replaced with the direct meter. Please note that the measuring probe is often only wetted with splashed oil.A measurement at, for example, the oil drain screw will therefore yield a different value.  Technical Data:Thread:   27 x 2.0 Thread Length:   11 mmTotal Length:   68 mmNeedle Length (exposed):   48 mm

#VALUE!

Mahle oil filter cartridge - For all K models with three seals and an o-ring for the oil pan cover As one of the world's leading filter manufacturers and OEMs for BMW motorcycles is Mahle has always stood for quality and technology. Oil filter Mahle keep dirt reliably from the lubrication circuit away to thereby obtain both the oil quality and the performance and efficiency of the engine. Mahle oil filter cartridges equipped made of sheet steel, deep-drawn and powder-coated housing for faster release of the filter with a polygon. Benefits of Mahle oil filters: - where cold start resistance by a stable pleat geometry - reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connectors - peak loads up to 20 bar are compensated by the high compressive strength of the housing - oil supply ensured by pressure relief valve at any time (for viscous oil, as it is placed in cold start phases or at low outside temperatures, as well as in a heavily contaminated by exceeding the change interval filter element) - return valve the emptying of the filter prevented when the engine and ensures at engine start rapid supply of oil

JMP oil temperature gauge / analogue display The original oil filler plug must be replaced with direct knife. Please note that the probe often only with geschleudertem oil wetted on .A measurement example Therefore, the oil drain plug results in a different value. Danger Please carefully compare the thread diameter, pitch and length of the oil dipstick with the replacement part !!!!!!!! Dimensions: - thread x pitch: 26 x 1.5 mm - Thread length: 9 mm - Total needle length: 298 mm - Exposed needle length: 280 mm No reason for complaint The bubble in the sight glass assures the compensation of the damping oil when heated!

JMP Öltemperatur-Direktmesser / Analog-Anzeige   Die originale Öleinfüllschraube ist gegen den Direktmesser auszutauschen. Bitte beachten Sie, dass die Messsonde oftmals nur mit geschleudertem Öl benetzt wird. Eine Messung an z.B. der Ölablassschraube ergibt daher einen anderen Wert.  

This is a used part being offered Vehicle: K100 / K75 Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, parts donor!!! Part number: 65752315540

Optimal operation even in sporty use: The ergonomically optimized HP hand levers can be adjusted via a setting screw in five (brake lever) or three stages (clutch lever) to suit the individual needs or habits of the rider. Only with the correct grip width can the clutch and front brake be operated optimally and sensitively dosed. The CNC-milled hand levers made of anodized aluminum combine functionality with a high degree of aesthetics. The exclusive look with the HP logo also emphasizes the sporty ambition of the machine. Grip width individually adjustable. Optimal operation of clutch and front brake. Sporty look including HP logo. CNC-milled.

Backrest for top case for high comfort of the passenger

Manufacturer: BMW Condition: NEW Description: sold as shown, D = 70mm Part Number: 51147721222 Fits:

The practical alternative or addition to the tank bag: The bag for the luggage bridge features a waterproof main compartment with a volume of 4.5 liters. This compact soft bag made of durable polyester fabric offers enough storage space for the daily commute or a day trip. The main compartment includes an inner bag with a roll closure and sealed seams, keeping your belongings clean and dry. A mesh pocket in the lid holds various small items. The three-sided zipper is water-repellent and allows for quick access, while the carrying handle makes it easy to transport the soft bag to and from the motorcycle. The molded EVA bottom with a non-slip coating helps secure it on the bike, and it is mounted by sliding it onto the luggage bridge with additional strap fastening. The back of the black bag is adorned with a BMW Motorrad logo. Compact soft bag for short trips. Waterproof main compartment. Subtle design. Color: Black. Dimensions (L x W x H): 23 x 28 x 17 cm, Volume: 4.5 liters.

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to work together. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free to move can it operate optimally!

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has matched the materials of the brake disc and brake pad to each other. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free can it operate optimally!

The HP cover for the expansion tank made of anodized aluminum enhances the sporty character of the machine. The high-quality machined cover with HP branding emphasizes the high-performance claim while also providing an attractive customization of the machine. High-quality machined part. Emphasizes sporty appearance. High customization effect.

The impact protection made of durable plastic protects the left touring case from scratches and other surface damage on the sides, bottom, and front. The protection is made of elastic and resilient thermoplastic polyurethane (TPU). The profile of the upper bumper is designed so that it is the widest part of the case instead of the painted side surface. This effectively prevents paint damage, for example, when maneuvering. Robust protection against impacts and bumps. Two molded parts made of durable plastic. Color: Black.

The impact protection made of durable plastic protects the left touring case from scratches and damage at the front, sides, and bottom. The two molded parts are therefore very useful when maneuvering the machine into tight parking spaces or narrow passages. However, even during manual transport, the impact protection can absorb some bumps. Robust protection against impacts and bumps. Two molded parts made of durable plastic. Color: Black. Material: TPU plastic (thermoplastic polyurethane)

The impact protection made of durable plastic protects the right touring case from scratches and other surface damage on the sides, bottom, and front. The protection is made of elastic and resilient thermoplastic polyurethane (TPU). The profile of the upper bumper is designed so that it is the widest part of the case instead of the painted side surface. This effectively prevents paint damage, for example, when maneuvering. Robust protection against impacts and bumps. Two molded parts made of durable plastic. Color: Black.

The impact protection made of durable plastic protects the right touring case from scratches and damage at the front, sides, and bottom. The two molded parts are therefore very useful when maneuvering the machine into tight parking spaces or narrow passages. However, even when transporting by hand, the impact protection can absorb some bumps. Robust protection against impacts and bumps. Two molded parts made of durable plastic. Color: Black. Material: TPU plastic (thermoplastic polyurethane)

The two-part, robust engine protection bar made of matte blasted stainless steel protects the engine housing from major damage and perfectly integrates into the elegant overall concept. 2-part, robust engine protection bar made of electropolished stainless steel Elegant, matte blasted surface Protects the engine housing from damage and reduces consequential damage Weight: approx. 1.9 kg (both sides including mounting parts)

The two-part, robust engine protection bar made of matte blasted stainless steel protects the engine housing from major damage and perfectly integrates into the elegant overall concept. 2-part, robust engine protection bar made of electropolished stainless steel Elegant, matte blasted surface Protects the engine housing from damage and reduces consequential damage Weight: approx. 1.9 kg (both sides including mounting parts)

Zuverlässiger Wetterschutz: Die Fahrzeugabdeckhaube für den Außenbereich schützt das Motorrad auch unter freiem Himmel vor Nässe, Schmutz und anderen Umwelteinflüssen. Das hochwertige Nylon-Cover ist wasserdicht und verfügt über Belüftungsöffnungen sowie ein großes Sichtfenster im Bereich des Kennzeichens. Kordelzüge gewährleisten eine optimale Fixierung der Haube am Motorrad, die beiden Metallösen im Frontbereich lassen sich zur Diebstahlsicherung nutzen. Praktisch ist zudem die integrierte Tasche, in der das Cover bei Nichtgebrauch aufbewahrt werden kann. Die schwarze Abdeckhaube ist mit einem großen silberfarbenen BMW Motorrad Schriftzug versehen und für viele BMW Motorräder geeignet.   Zuverlässiger Wetterschutz. Praktische Handhabung.

• High-quality footrest for the passenger. • Made from high-strength aluminum alloy. • Non-slip rubber pad. • Dimensions: 155 x 102 mm. • Optimal for relaxed long tours.

• High-quality footrest for the passenger. • Made from high-strength aluminum alloy. • Non-slip rubber pad. • Dimensions: 155 x 102 mm. • Optimal for relaxed long tours.

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to work together. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free can it operate optimally!

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to work together. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free to move can it operate optimally!