Brake Pads & Brake Discs

- CRQ - Compound mixture - Racing compound based on carbon - For track use only - Higher durability than SRQ - Lower hand force and good cold friction value - Suitable for high-performance applications

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

Sinter Carbon Racing   - High-performance racing compound - Meets the highest demands of professional racers - Excellent durability even under the most extreme conditions with extremely high friction values - SCR pads are also suitable for use in endurance races. - The use of SCR pads is recommended exclusively under professional racing conditions.   The SCR pads do not have ABE

EBC Extreme Pro - Perfect for the street and for racing!   State-of-the-art sintered metal technology is now available for all newer sport bikes and street racing machines from the EBC high-tech facility in Cleveland, Ohio.   The new Extreme Pro brake pad has been tested on the dyno, on the racetrack, and on the street, and it was used in the 2008 Daytona 200 races by 8 of the top 20 riders. The new material features an optimal heat cycle, feels better at the brake lever, and ensures quick bedding-in.   Extreme Pro brake pads are ideal for fast street and racing machines,

SP Sintered Metal Brake Pads for Rear (SP) A sintered mixture specifically designed for rear wheel brakes (SP) that offers improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

LA Sintermetall Longlife Street Brake Pad for Front   A brake pad designed for longevity. It is characterized by excellent efficiency in all areas of use.

LA Sintermetall Longlife Straßenbremsbelag für Vorne Ein Bremsbelag, welcher auf Langlebigkeit ausgelegt ist.Er zeichnet sich durch hervorragende Effizienz in allen Einsatzbereichen aus.

TRQ Belag Die neuen Beläge mit der neuen Mischung sind die Nachfolger der bis dahin erfolgreichen SRQ Beläge mit einem deutlichen Upgrade der Features.Er ist als Rennbelag zu klassifizieren, hat mit der neuen ECE R90 jedoch auch eine Straßenzulassung.Damit eignet er sich besonders, um auf der Rennstrecke (z.B. bei Track Days) Gas zu geben und anschließend direkt nach Hause fahren zu können.Die Zielgruppe sind ambitionierte, sportliche Fahrer. Der TRQ ist über dem SRT einzuordnen. - Höhere Bremsleistung durch einen höheren und stabileren Reibwert (im Vergleich zum früheren SRQ)- Direkteres Ansprechverhalten durch einen optimierten Initial Bite- Bedeutend geringerer Belag- und Scheibenverschleiß- Mit ECE R90 für die Straße zugelassen!- Der Reibbelag ist mit dem NRS System fest mit der Rückenplatte verbunden- Leichtes Einfahren für optimale Performance empfohlen- Dank des innovativen Sinterverfahrens thermisch besonders belastbar

SA Sintermetall Straßenbremsbeläge für vorne (SA)Eine gesinterte Mischung, die speziell für Vorderradbremsen entwickelt wurde und unter allen Betriebsbedingungen eine verbesserte Bremsleistung bietet.Eine ideale Alternative zu OE-Bremsbelägen für eine optimale Leistung auf der Straße.

SV - BelagmischungVollmetallischer Sinterbelag mit Speziallackierung .Hoher Reibwert garantiert sehr gute Leistung .Auf fast allen Scheiben einsetzbar .Nur im Austausch gegen Sinterbeläge in der Erstausstattung .Nur bedingt im Rennsport einsetzbar , da keine Hitzeresistenz ab 400 Grad .Nur für Vorderachse einsetzbar .

EBC brake discs. MADE IN UK.Ziel in the development is to improve the braking performance compared to the original brake disc. EBC used HPSR steel with a low carbon content, having a higher coefficient of friction by 18%. This steel is much more resistant to rust than cast steel. In addition, the entire surface with a 3-micron thick zinc coating is protected, which already abrades in the area of ​​the pad contact zone when decelerating. Only in this area Light surface rust can form on prolonged service life. The brake discs are drilled in the wings of a bird design to make do with as few holes as possible with optimum cleaning of the brake disc of rainwater and brake dust. The fewer holes are provided, the better the wet braking performance and the lower the wear. - Rigid Bremsscheibe.- Ground from rolled steel HPSR gefertigt.- with low carbon content with optimized braking surface hole pattern gebohrt.- radial. - Galvanized to protect against Korrosion.- EBC EBC Organic recommends brake pads or for sporty drivers EBC Double-H Sinterbremsklötze.- Independent design.

Bremsscheiben EBC. MADE IN UK. Ziel bei der Entwicklung ist die Verbesserung des Bremsverhaltens gegenüber der Originalbremsscheibe. EBC verwendet HPSR Stahl mit einem niedrigen Kohlenstoffgehalt, der einen um 18% höheren Reibbeiwert besitzt. Dieser Stahl ist wesentlich widerstandsfähiger gegen Rost als Gussstahl. Zusätzlich ist die gesamte Oberfläche mit einer 3 Mikron dicken Zinkschicht geschützt, die sich im Bereich der Bremsbelagkontaktzone schon beim Einbremsen abschleift. Lediglich in diesem Bereich kann sich leichter Flugrost bei längerer Standzeit bilden. Die Bremsscheiben sind im Vogelschwingendesign gebohrt, um mit so wenig Bohrungen wie möglich bei gleichzeitig optimierter Reinigung der Bremsscheibe von Regenwasser und Bremsstaub auszukommen. Je weniger Bohrungen angebracht sind, desto besser ist das Nassbremsverhalten und desto geringer ist der Verschleiß. - Starre Bremsscheibe.- Aus gewalztem HPSR Stahl mit niedrigem Kohlenstoffgehalt gefertigt.- Bremsfläche mit optimiertem Lochmuster gebohrt.- Radial geschliffen.- Verzinkt zum Schutz gegen Korrosion.- EBC empfiehlt EBC Organic Bremsklötze oder für sportliche Fahrer EBC Double-H Sinterbremsklötze.- Eigenständiges Design.

All brake discs come with an ABE, also for scooters. The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts. All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel. The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads. A uniform temperature rise and fall allows for a constant pressure point. A new special alloy prevents excessive corrosion. Laser technology enables a lightweight design with fine contours. Each brake disc can be individually paired with brake pads from the TRW-Lucas range. TRW-Lucas floating brake disc Allround - Round outer contour with perforated brake edge - Available in rigid and floating variants - Coordinated design from front to rear axle Technical Data:Outer Diameter: 320 mmInner Diameter: 181 mmBolt Circle: 202.5 mmNumber of Holes: 5 Hole Diameter: 16.5 mmThickness: 4.5 mmDesign: rigid Manufacturer: TRW

All brake discs come with an ABE, also for scooters.   The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts.   All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel.   The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads.   A uniform temperature rise and fall allows for a constant pressure point.     A new special alloy prevents excessive corrosion. Laser technology enables a lightweight design with fine contours.   Each brake disc can be individually paired with brake pads from the TRW-Lucas range. TRW-Lucas floating brake disc RAC   - Notched outer contour with slotted brake edge - Available in rigid and floating variants - Coordinated design from front to rear axleTechnical Data:Outer Diameter:   320 mmInner Diameter:   181 mmBolt Circle:   203 mmNumber of Holes:   5 Hole Diameter:   8.4 mmThickness:   4.5 mmDesign:   rigid Manufacturer:   TRW

RC Carbon Ceramic Racing Brake Pads for Front   This is a true racing pad, suitable for all types of competition on the racetrack. With an excellent coefficient of friction and exceptional stability at high temperatures, the compound ensures consistent braking performance lap after lap, from the start to the checkered flag. For track use only.

SR Sintermetall Racing Brake Pad for Front This is a material that remains very stable under all operating conditions. With high braking performance in hot conditions and a good coefficient of friction in cold conditions, it is also suitable for fast road use, making it ideal for motorcycles that are used both on the road and on the racetrack.

TRQ Brake Pads   The new pads with the new compound are the successors to the previously successful SRQ pads, featuring a significant upgrade in performance. They are classified as racing pads, but with the new ECE R90, they also have street approval. This makes them particularly suitable for giving it your all on the racetrack (e.g., during track days) and then being able to ride directly home afterward. The target audience is ambitious, sporty riders. The TRQ is positioned above the SRT.   - Higher braking performance due to a higher and more stable friction coefficient (compared to the previous SRQ) - More direct response due to optimized initial bite - Significantly lower wear on pads and discs - Approved for the street with ECE R90! - The friction material is firmly bonded to the backing plate with the NRS system - Easy bedding in recommended for optimal performance - Particularly thermally resilient thanks to the innovative sintering process  

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout safety are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while also providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   276 mmBolt Circle:   160 mmNumber of Holes:   5 Hole Diameter:   10.5 mmThickness:   5 mmDesign:   fixed Manufacturer:   Brembo

SA Sintered Metal Front Brake Pads (SA) A sintered mixture specifically designed for front wheel brakes, providing improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

Without information about the wheel speed, the ABS cannot function. Especially for machines that are often used on loose surfaces, proper protection of the sensitive wheel sensors is therefore essential.The elegantly designed stainless steel cover protects the front ABS sensor from coarse dirt and stones.