Tank & Tank Accessories

Hiflo Premium Oil Filter   The Hiflo Premium Oil Filters provide optimal benefits for the customer and impress with the best quality. Only high-quality materials are used in the manufacturing of the filters.   As the only filter manufacturer, Hiflo has its filters tested and certified by TÜV Süddeutschland. The filters are compared with the respective original filter in all relevant criteria. The test can only be passed successfully if the Hiflo filter meets or exceeds the values of the original filter. This ensures that all filters meet the quality requirements of the original equipment.   Hiflo also offers the largest range of filters for motorcycles and ATVs.

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals prescribed by the motorcycle manufacturers.    

Seal Ring   Material: AluminumThickness [mm]: 1.5Outer Diameter [mm]: 22.0Inner Diameter [mm]: 18.0Technical Data:Range:   No Inner Diameter:   18 mmOuter Diameter:   22 mmHeight:   1.5 mmMaterial:   Aluminum Design:   Flat Gas Resistant:   Yes Oil Resistant:   Yes

Closure Screw JMP   - M18X1.5X12- DIN 908- Zinc-platedTechnical Data:Type:   Oil Drain Screws    Closure Screws Thread:   M18 x 1.5 Diameter:   18 mmLength:   12 mmHead:   Flat Head Drive:   Internal Hexagon Surface:   Electro-galvanized Material:   Steel Color:   Silver DIN:   908 O-ring/Washers:   None Manufacturer:   JMP Bolt For Safety Wire:   No Technical Data:Thread:   M18 x 1.5 Length:   12 mmHead:   Round Head with Internal Hexagon Material:   Steel Color:   Gray For Safety Wire:   No O-ring/Washers:   No Magnetic:   No

Fuel Filter Screen

Fuel Pump Repair Kit for BMW K1 K75 K100 K1100 DIRECT-FIT Fuel Pump for BMW K Models 1988-2005Quick and easy DROP-IN INSTALLATION: Replace all worn components to restore OE performance. Often, the rubber parts, such as the vibration damper, are also heavily worn. Rubber residues can be found in the fuel lines. Sometimes the fuel filter is even damaged. All these potential sources of error can be eliminated with this kit. Delivery directly from Germany. No additional import taxes or duties for EU customers!FEEL THE PERFORMANCE DIFFERENCE! DESIGNED TO IMPROVE PERFORMANCE AND ENSURE LONGEVITY. Developed and constructed for trouble-free operation of over 2,500 hours or 100,000 miles. Enhanced polymers, brushes, and commutators ensure a steady flow, power intake, and quiet operation.The ideal replacement for BMW part number: 16121461576 Fits according to BMW ETK in the following vehicles: K589 (K1, K 100 RS)   (08/1988 — 09/1993) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K100, RS, RT, LT)   (05/1982 — 10/1991) K569 (K 75, K 75 C, K 75 S, K 75 RT)   (12/1984 — 06/2005)

  Haltering für Kraftstoffpumpe mit 52mm Durchmesser  

  O-Ring Fuel Pressure RegulatorTechnical Data:Range:   No Inner Diameter:   5 mmOuter Diameter:   8 mmHeight:   1.5 mmMaterial:   Rubber Design:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

BMC Tauschluftfilter   Das erworbene Know-how auf den Rennstrecken wird direkt in die Produktion der Serienfilter eingebracht, um dem anspruchsvollen Motorradfahrer ein Produkt zu bieten, das erprobt ist, Leistung bringt und sich in einer ständigen Evolution befindet.   Die verwendeten Materialien sind die besten, die momentan auf dem Markt verfügbar sind. Die Filter werden aus einem einzigen Gummirahmen hergestellt, um eventuelle Brüche zu verhindern. Das filtrierende Element ist aus einem speziellen Baumwollgewebe (4 Lagen), getränkt in einem Öl mit geringer Klebrigkeit.   Es wird umfasst von einem Aluminiumnetz, das mit einer Epoxidlösung behandelt ist, um gegen die Benzindämpfe und der Oxidation resistent zu sein. Zudem hat die Baumwolle den Vorteil auswaschbar und wieder verwendbar zu sein.   Durch diese Merkmale garantieren die BMC-Sportluftfilter (Tauschluftfilter) einen höheren Luftdurchsatz gegenüber den original verwendeten Papier-Filtern, einen minimalen Druckverlust der eintretenden Luft und führen somit zu einer besseren Leistung des Motors.   - Haltbarkeit: waschbar und wieder verwendbar, kein Ersatz nötig - Breitere Filteroberfläche - Maximale Luftdurchlässigkeit (4 Lagen Baumwolle) - Höhere Absorption und Filterung - Besseres Druckabfall-Verhältnis - Geprüft durch internationale Testverfahren

The original K & N air filter. The K & N air filters are easily replace the standard air filter. It required no changes to the system. The standard setting the carburetor does not need to be changed. results from using K & N air filters no loss of power, on the contrary, because the potential of the air box is optimized. undAbgasvorschriften noise are complied with. K & N filter have the same life span as the motors and allow substantial savings in filter purchase. The unique filter system can extend the life of the motors undschützt optimally against dangerous dust, sand, etc. K & N filters are fully washable permanent filter with little maintenance recovery and can be used again without any loss of filter efficiency and air flow. - High airflow with excellent filtration - Developed to increase horsepower and acceleration - washable and reusable - Economical; K & N filter holds over the entire life of the Motors products maintenance interval; up to 80,000 km, before cleaning is required depending on road use - Compatible with OEM Vehicle Electronics - Environmentally friendly