Brake pads & brake discs

BMW Original Front Brake Disc with Rivets NEW Product Description This offer includes 1 front brake disc D=320-5.0MM . This offer applies to the item in the red marked circle!!! ( Illustration No. 1 ) BMW Part Number: 34117711429 Fits according to part number for the following vehicles: K 1200 S K 1300 S K 1200 GT K 1300 GT

  EBC Brake Discs. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc coating, which wears off in the brake pad contact zone during the bedding-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Rigid brake disc. - Made from rolled HPSR steel with low carbon content. - Brake surface drilled with an optimized hole pattern. - Radially ground. - Zinc-coated for corrosion protection. - EBC recommends EBC Organic brake pads or for sporty riders EBC Double-H sintered brake pads. - Standalone design. Technical Data:Outer Diameter:   294 mmInner Diameter:   137.2 mmBolt Circle:   160 mmNumber of Holes:   5 Hole Diameter:   10.5 mmThickness:   6 mmDesign:   rigid Manufacturer:   EBC

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

EBC Brake Pads Standard The EBC version SK930/ SK931/ SK932/ SK933/ SK934 contains aramid fibers that are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in production. These standard materials exceed all previous EBC standard qualities. The material mixtures, including the aramid fibers, guarantee better braking performance. High friction stability and very good temperature resistance. The lifespan is very high, and the disc wear is low. These qualities maintain their excellent properties under all weather conditions. EBC standard brake pads are TÜV certified and have an ABE.

EBC Standard Semi-Sintered Metal Brake Pads (V-Series) The EBC Standard Semi-Sintered Metal Brake Pads (V-Series) are organic aramid brake pads with a 30% copper content, designed for cruisers, big twins, and touring bikes. These pads are 6 times stronger than steel and are completely asbestos-free. The medium to high friction coefficient ensures strong braking power across a wide temperature range. The high braking force results in minimal wear on both the brake pad and the brake disc. EBC Standard Semi-Sintered Metal Brake Pads (V-Series) are TÜV certified and come with an ABE!

- Mounting accessories BMW for floating-mounted, riveted TRW-Lucas brake discs 5mm- from model year 12/2007-- the set includes 5 washers- 1 mounting kit per brake disc Most BMW motorcycle models are still equipped with a rigid brake disc, which, unlike the otherwise common floating brake discs from other motorcycle manufacturers, is directly bolted to the rim using sleeves and wave washers (or spring rings).The bolted construction was replaced by a pressed variant by BMW in 2008.With the TRW mounting kits, it is possible to cover both variants.This significantly simplifies the assignment and inventory management and is an interesting, cost-effective option for the BMW customer.

10/49 Carbon-Ceramic Street Brake Pad   Identical organic compound as the OE pad to ensure safe, consistent braking performance that reflects the manufacturer's original specifications.

SP Sintered Metal Brake Pads for Rear (SP) A sintered mixture specifically designed for rear wheel brakes (SP) that offers improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

LA Sintermetall Longlife Straßenbremsbelag für Vorne Ein Bremsbelag, welcher auf Langlebigkeit ausgelegt ist.Er zeichnet sich durch hervorragende Effizienz in allen Einsatzbereichen aus.

SR Sintermetall Rennbremsbelag für Vorne Dies ist ein Material, das unter allen Betriebsbedingungen sehr stabil bleibt.Mit einer hohen Bremsleistung im heißen Zustand und einem guten Reibungskoeffizienten im kalten Zustand ist es auch für den schnellen Straßeneinsatz geeignet und somit ideal für Motorräder, die sowohl auf der Straße als auch auf der Rennstrecke eingesetzt werden.

SA Sintermetall Straßenbremsbeläge für vorne (SA)Eine gesinterte Mischung, die speziell für Vorderradbremsen entwickelt wurde und unter allen Betriebsbedingungen eine verbesserte Bremsleistung bietet.Eine ideale Alternative zu OE-Bremsbelägen für eine optimale Leistung auf der Straße.

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1150RT Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 34117670392