Electric & Chargers

For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

Yuasa Maintenance-free motorcycle battery - Maintenance-free starter battery in a reliable Markenqualität- Leakproof by AGM technology (Absorbed Glass Mat) - Leak-proof pressure relief valve prevents an ignition of the electrolyte at overpressure Vibrationsfest- up to 3 times longer life compared to standard Batteries- advanced lead-calcium technology increases Startleistung- sulphate-stop limits the Plattensulfatierung clearly need one maintenance-free batteries, no topping up with distilled water by heating connected battery casing leaks and corrosion- preventing an acid pack with an appropriate amount of acid for filling is included Same as: Yuasa Manufacturer number 51913Varta MPN 51913Exide manufacturer number 519901 gel G19JMT manufacturer number 51913-21 GelJMT manufacturer number HJ51913-FP-I lithium Ion

Lithium-ion batteries from JMT, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.   Indicator (I) All batteries are equipped with a battery status indicator.     Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED lights up (low), the battery needs to be charged.   By replacing a standard lead-acid battery, up to 5 kg of weight can be saved without significant effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of comparable lead-acid batteries - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to specific properties, while lithium-ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, which means the battery can be replaced in just a few minutes without further adjustments.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and employ the lithium polymer process in manufacturing. This means they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process ensure the highest safety standards for lithium batteries.     - 12 V maintenance-free lithium-ion battery - Recommended charging current 4 A - Maximum charging current for fast charging 28 A   Comparable in dimensions and connections with: Yuasa manufacturer number 51814 51913 52015 YT19BL HG-18-12   Technical Data:Voltage:   12v Capacity:   7.17 Ah (10 hrs)Energy Output:   90 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps according to manufacturer:   450 AManufacturer's test standard:   SAE Cold Cranking Amps measured in (SAE) with JJM 609.00.66:   540 ACold Cranking Amps measured in (DIN) with JJM 609.00.66:   495 ACold Cranking Amps measured in (EN) with JJM 609.00.66:   300 ALength:   181 mmWidth:   77 mmHeight:   170 mmWeight ready for use:   1.4 kgAcid pack included:   No Connection type:   from the side Positive terminal:   front right Negative terminal:   front left Gas outlet:   None Manufacturer:   JMT

Battery Rubber Holder

BMW Original Repair Connector 4-Pole No. 610615 Item Description This offer includes 1 repair connector 4-pole. This offer applies to the red marked connector!!! ( Illustration No. 5 ) BMW Part Number: 83300402340 Fits according to part number for the following vehicles: K50 (R 1200 GS)   (10/2011 — 10/2016) K51 (R 1200 GS Adventure)   (09/2012 — 10/2016) K52 (R 1200 RT)   (01/2013 — 10/2016) K53 (R 1200 R)   (11/2013 — 10/2016) K54 (R 1200 RS)   (06/2014 — 10/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 08/2016) K23 (R nineT Scrambler)   (09/2015 — 10/2016) K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010) K42 (HP4)   (09/2011 — 07/2014) K46 (S 1000 RR)   (09/2008 — 10/2016) K47 (S 1000 R)   (02/2013 — 07/2016) K49 (S 1000 XR)   (05/2014 — 09/2016) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 10/2016) K70 (F 700 GS)   (06/2011 — 10/2016) K71 (F 800 S, F 800 ST, F800GT)   (12/2004 — 09/2016) K72 (F 650 GS, F 800 GS)   (10/2006 — 10/2016) K75 (F 800 GS Adventure)   (05/2012 — 10/2016) K73 (F 800 R)   (12/2005 — 09/2016) R13 (F 650 GS, GS Dakar)   (02/1999 — 10/2007) K14 (F 650 CS)   (11/2000 — 07/2005) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 10/2016) K19 (C 650 GT)   (01/2011 — 10/2016) R13 (G 650 GS)   (02/2008 — 10/2015) R13 (G 650 GS Sertão)   (07/2010 — 11/2014) 259 (R 850 GS, R 1100 GS)   (04/1993 — 07/2006) R21 (R 1150 GS)   (09/1998 — 11/2003) R21 (R 1150 GS Adventure)   (07/2001 — 09/2005) 259R (R 850 R, R 1100 R)   (09/1993 — 11/2002) 259 (R 850 RT, R 1100 RT)   (05/1994 — 11/2001) R28 (R 850 R, R 1150 R, Rockster)   (11/1999 — 07/2007) R22 (R 850 RT, R 1150 RT, R 1150 RS)   (01/2000 — 03/2006) 259C (R 850 C, R 1200 C)   (04/1996 — 07/2004) 259 (R 1100 S, R 1100 RS)   (01/1992 — 07/2005) 259C (R 1200 C Montauk)   (10/2002 — 10/2004) 259C (R 1200 C Independent)   (05/2000 — 08/2004) K30 (R1200 CL)   (10/2001 — 07/2004) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K 1200 RS, K 1200 LT)   (04/1996 — 07/2008) K41 (K 1200 GT, K 1200 RS)   (03/2000 — 07/2005) C1   (10/1999 — 04/2003)

BMW Original Repair Connector 4-Pole No. 610615 Item Description This offer includes 1 repair connector 4-pole. This offer applies to the red marked connector!!! ( Illustration No. 5 ) BMW Part Number: 83300402340 Fits according to part number for the following vehicles: K50 (R 1200 GS)   (10/2011 — 10/2016) K51 (R 1200 GS Adventure)   (09/2012 — 10/2016) K52 (R 1200 RT)   (01/2013 — 10/2016) K53 (R 1200 R)   (11/2013 — 10/2016) K54 (R 1200 RS)   (06/2014 — 10/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 08/2016) K23 (R nineT Scrambler)   (09/2015 — 10/2016) K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010) K42 (HP4)   (09/2011 — 07/2014) K46 (S 1000 RR)   (09/2008 — 10/2016) K47 (S 1000 R)   (02/2013 — 07/2016) K49 (S 1000 XR)   (05/2014 — 09/2016) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 10/2016) K70 (F 700 GS)   (06/2011 — 10/2016) K71 (F 800 S, F 800 ST, F800GT)   (12/2004 — 09/2016) K72 (F 650 GS, F 800 GS)   (10/2006 — 10/2016) K75 (F 800 GS Adventure)   (05/2012 — 10/2016) K73 (F 800 R)   (12/2005 — 09/2016) R13 (F 650 GS, GS Dakar)   (02/1999 — 10/2007) K14 (F 650 CS)   (11/2000 — 07/2005) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 10/2016) K19 (C 650 GT)   (01/2011 — 10/2016) R13 (G 650 GS)   (02/2008 — 10/2015) R13 (G 650 GS Sertão)   (07/2010 — 11/2014) 259 (R 850 GS, R 1100 GS)   (04/1993 — 07/2006) R21 (R 1150 GS)   (09/1998 — 11/2003) R21 (R 1150 GS Adventure)   (07/2001 — 09/2005) 259R (R 850 R, R 1100 R)   (09/1993 — 11/2002) 259 (R 850 RT, R 1100 RT)   (05/1994 — 11/2001) R28 (R 850 R, R 1150 R, Rockster)   (11/1999 — 07/2007) R22 (R 850 RT, R 1150 RT, R 1150 RS)   (01/2000 — 03/2006) 259C (R 850 C, R 1200 C)   (04/1996 — 07/2004) 259 (R 1100 S, R 1100 RS)   (01/1992 — 07/2005) 259C (R 1200 C Montauk)   (10/2002 — 10/2004) 259C (R 1200 C Independent)   (05/2000 — 08/2004) K30 (R1200 CL)   (10/2001 — 07/2004) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K 1200 RS, K 1200 LT)   (04/1996 — 07/2008) K41 (K 1200 GT, K 1200 RS)   (03/2000 — 07/2005) C1   (10/1999 — 04/2003)

Brake Light Switch Original Spare Part

  Cable Repair Kit   For repairing the main wiring harness. Commonly used to power GPS (satellite navigation system) that is not from BMW through the wiring harness. Simply connect to the wires of the power cable supplied with the GPS and plug it in!

From now on, all problems with low battery voltage in BMW motorcycles with ABS are a thing of the past. For the first time! Gel technology for motorcycles - only from EXIDEMounting kit with screws and nuts Charging in the vehicle: Required charging voltage between 14.1V and 14.4VCharging with a charger: Only devices with the IU or IU1U2 characteristics with the following specifications may be used:I-Phase: 2 - 5 A (recommended) U- or U1-Phase: 14.1 - 14.4V; U2-Phase: 13.8 VCharging times: IU or IU1 at least 12 hours, switch-over point U2-Phase after 12 - 16 hoursReplaces DIN types 518 14, 519 13, 525 15 Replacement for 51814, 51913, and 52015Original equipment for BMW. Usable for BMW R models from 1970 and all K models. Ready for immediate installationTechnical Data:Voltage: 12v Capacity: 19 Ah (10 hrs)Design: Gel Maintenance-free Activated: Yes Cold cranking current according to manufacturer: 170 ACold cranking current in (EN) measured with JJM 609.00.66: 170 ALength: 185 mmWidth: 80 mmHeight: 170 mmWeight ready for use: 6.4 kgAcid pack included: No Connection type: from the side Positive terminal: front right Negative terminal: front left Gas outlet: None Manufacturer: Exide

Horn (Starkton) 12V Bosch - Erstausrüsterqualität- nominal voltage: 12V power consumption: 60 W light Diameter: 125 mm connections: 2 Frequency range: 375 Hz volume: 115 dB (A) - Color: black

Horn (Starkton) 12V Bosch - Erstausrüsterqualität- nominal voltage: 12V power consumption: 60 W light Diameter: 125 mm connections: 2 Frequency range: 500 Hz volume: 115 dB (A) - Color: black

Notice: No sales to private individualsThe battery acid (sulfuric acid 37%) is classified as a restricted substance for explosives according to EU 20197/1148.We would like to inform you as a business participant that the acquisition, transport, possession, and use of this substance by members of the general public is subject to restrictions according to Article 5, paragraphs 1 and 3. JMT Motorcycle Battery High Power - High power starter battery in proven and reliable brand quality. - Increased cold start performance compared to standard batteries - dry unfilled - this starter battery includes screws, vent hose, and acid pack in the appropriate quantity for initial filling. Equivalent to: JM Manufacturer Number 12N19AH Varta Manufacturer Number 51814 Fiamm Manufacturer Number 6H4P Technical Data:Voltage: 12v Capacity: 19 Ah (10 hrs)Design: Standard Activated: No Cold cranking current according to manufacturer: 210 AManufacturer's test standard: SAE Cold cranking current measured in (SAE) with JJM 609.00.66: 335 ACold cranking current measured in (DIN) with JJM 609.00.66: 310 ACold cranking current measured in (EN) with JJM 609.00.66: 190 ALength: 185 mmWidth: 82 mmHeight: 170 mmWeight ready for operation: 5.99 kgAcid pack included: Yes Acid volume: 1.08 LConnection type: from the side Positive terminal: front right Negative terminal: front left Gas outlet: right Manufacturer: JMT

Yuasa Yumicron Motorcycle Battery - High power starter battery in reliable brand quality- High-performance fiberglass mats protect against vibration damage- Thin special separators in additional plates provide up to 30% higher cold start performance- Continuous cell connectors minimize internal resistance and increase performance- Sulfate stop significantly limits plate sulfation- Heat-sealed battery case prevents leaks and corrosion- Dry unfilled- An acid pack with the appropriate amount of acid for initial filling is available separately Equivalent to: JM Manufacturer Number 12N19AHVarta Manufacturer Number 51913Technical Data:Voltage: 12v Capacity: 17.7 Ah (10 hrs)Energy Performance: 212.4 WhDesign: Standard Activated: No Cold Cranking Amps (Manufacturer): 100 AManufacturer Test Standard: DIN Cold Cranking Amps (SAE) measured with JJM 609.00.66: 290 ACold Cranking Amps (DIN) measured with JJM 609.00.66: 260 ACold Cranking Amps (EN) measured with JJM 609.00.66: 160 ALength: 186 mmWidth: 82 mmHeight: 171 mmWeight (ready for use): 5.6 kgAcid Pack included: No Acid Volume: 1 LConnection Type: Side Positive Terminal: Front right Negative Terminal: Front left Gas Vent: Left Manufacturer: Yuasa

This is a used part being offered Vehicle: K100 / K75 Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, parts donor!!! Part number: 65752315540

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

The tank bag cable is equipped on the vehicle side with a compact DIN angled plug and on the tank bag side with a USB twin charger (USB-A and USB-C). The tank bag cable is ideal for plugging into the standard onboard sockets of BMW, Triumph, and Ducati, or into a small retrofitted DIN onboard socket (SD14/22). It allows for easy charging of USB devices such as mobile phones, cameras, or other electrical consumers simply by placing them in the tank bag. – Compact DIN angled plug – USB-A and USB-C socket each 3.6A – No vehicle installation required – Power consumption only when the plug is inserted – 1.5 m cable