JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

wasserdichte Smartphonetasche speziell für den Hepco&Becker Tankrucksack "Street Daypack" und "Royster" Smartphone lässt sich durch Hülle bedienen wird mittels kleiner Klettverschlüssel am Tankrucksack an 3 Punkten befestigt kann im Handumdrehen entfernt werden

Fabric rear bag for strap attachment on various rear racks. Not waterproof. Practical and well thought out: securely attached to the passenger seat, the weight distribution is not negatively affected, and the bike remains neutral and agile. With a zipper and compression straps, it offers a variable volume of up to 25 liters. The design made of coated Cordura fabric is water-repellent and durable. With a carrying handle and straps, it can also be used as a backpack or shoulder bag.Small Sport StarCapacity 15-25 litersDimensions W x H x D: 26 x 33 x 20/33 cm

The tank/airbox cover in carbon for the BMW F 800 R (2009-2014) / S (2006-now) / ST (2006-now) / GT (2012-now) greatly highlights the sporty look of the motorcycle. The original plastic piece is replaced with a carbon piece and screwed on using the standard mounting points. The tankcover in carbon for the BMW F 800 R (2009-2014) / S (2006-now) / ST (2006-now) / GT (2012-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Thermostat Original spare part

Universal programmable TPMS sensor, can be programmed via the diagnostic tool TECH350 (under accessories) or, even better, a clone of the OE sensor can be created. This variant is directly screwed onto the inside of the rim. The battery life corresponds to the OE sensor and lasts at least 5 years.

This revolutionary new device effortlessly installs mushroom-shaped rubber plugs in all tubeless tires while the tire can remain on the rim. With the help of the "Tire Repair Kit" and the included hex key, the plug is twisted into the hole. The plug expands under pressure, filling the punctured area. A strong pull on the shaft of the plug with pliers ensures a secure fit of the mushroom head against the inner wall of the tire, preventing any air from escaping. This technology guarantees maximum reliability and reduces your repair times in any situation.Only suitable for tubeless tires!Scope of delivery:- "Tire Plugger"- Adapter- Needle (with handle)- Rasp (with handle)- Hex key- 15 x plugs- Blade (foldable)- Bag- Fabric zipper bag (16 x 10 x 5 cm)Caution: Emergency repair kit!

The backpack for motorcyclists that meets almost all the requirements of adventure travelers! Whether on a motorcycle, bicycle, or hiking, it looks great even in the city! The "Touratech Adventure" offers plenty of space for everything you need on the go. All of this is organized into various compartments without being cluttered. The special shape, innovative features, and top-quality, breathable carrying system ensure a perfect fit in any situation.New features:- Extended, rollable compression straps serve as a helmet holder- Additional inner pockets- Extended breathable shoulder straps- Neon yellow rain cover with reflective TOURATECH logo keeps the contents of the backpack absolutely dry even in prolonged rainMore practical details:- Zipper sliders with snap buttons secure access against accidental opening- Spacious front pocket keeps important companions always within reach, including a key holder- Side compression straps allow for volume regulation to place the weight as close to the body as possible or to attach additional gear- Removable seat mat stabilizes the backpack and serves as a comfortable seating surface during breaks- Large 3M reflective areas provide more safety in rainy weather and darkness- Bungee cord on the top for quickly securing lightweight items- Mesh outer pockets keep water bottles, maps, or hats within reach- Sleeve for hydration system in the main compartment, with hose outlet- Separate bottom compartment with removable divider keeps the load in place- Quick-release buckles on the straps allow for easy wearing, even with a motorcycle jacket!- Deuter Airstripes back system ensures perfect carrying comfortVolume: approx. 30 litersMaterial: 210d nylon, Super-Polytex 600d polyester

This handy, compact basic first aid kit is ideal for short trips, cycling tours, and other sporting activities. Practical, small, lightweight.This kit contains everything that is important and required according to DIN 13167 for motorcyclists. Adhesive bandages, instant wound dressings, bandage packages, emergency blanket, sterile dressing, scissors, vinyl gloves, and a first aid manual are included.This first aid kit should be an essential part of your equipment. The bag is made of water-repellent nylon fabric with a large zipper. The First Aid Kit DIN 13167 is specifically designed for motorcycle use and contains the following:- 1 roll of adhesive bandage- 8 packs of instant wound dressings- 2 bandage packages- 1 emergency blanket- 1 sterile dressing- 1 pair of scissors- 4 bags of vinyl gloves- 1 first aid brochure- 1 contents listIn Austria, carrying a DIN 13167 first aid kit on a motorcycle is mandatory!Dimensions and Weight:- Dimensions: 15 x 10 x 5 cm- Weight: 240 g

Puncture Repair Kit AirMan ResQ Scout Tire Repair Set with 12V Compressor and 100ml Tire Sealant for MotorcyclesThe ideal travel companion and immediate helper for tire punctures!The AirMan ResQ Scout Repair Kit offers a portable solution for repairing flat tires, inflating tires, and monitoring tire pressure for motorcycles, quads, ATVs, UTVs, off-road vehicles, and scooters.Seals and repairs punctures caused by objects up to 6 mm.- Ideal for motorcycles and ATVs- The same solution has been supplied to leading vehicle manufacturers- Powerful 12V compressor with cigarette lighter connection- Analog precision gauge with PSI/BAR display- Selection of nozzle accessories and built-in vent button- 100 ml durable tire sealant - Fixes tire punctures up to 6 mm in diameter- Water-based sealant can be easily washed out of the tire to allow for complete tire repair- Non-toxic, non-corrosive, TPMS-safe, and approved by the largest automotive manufacturers in the world- Suitable for all vehicle brands- Linen carrying bag for neat and easy storageDelivery includes:- 12V power supply connections- 4 clamps- Compressor- 100 ml sealant

This flexible and robust steel net protects your luggage from theft during your travels. The net is highly stretchable and cut-resistant. It comes with a lock that allows you to secure your luggage to fixed objects.Weight: 580 g

The touring screen is generally longer, and sometimes wider than the original screen, to better protect the rider from wind and weather. Depending on the angle of the screen, the rear edge of the screen is also tilted upwards across its entire width on some models, acting as a wind deflector. This makes riding more comfortable even on longer trips.

The carbon side panels below the seat for the&nbspBMW F 800 R (2009-2014) / S (2006-now) / ST (2006-now) / GT (2012-now) are moulded to also conceal as much of the originally black plastic tank as possible. The sidepanel under the seat in carbon for the&nbspBMW F 800 R (2009-2014) / S (2006-now) / ST (2006-now) / GT (2012-now) is an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.&nbsp

CNC-machined Handlebar Ends for Motorcycles Distinctively elegant finish with only 6.5 mm thickness Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 44g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles High-quality anodized in color The mounting screw elegantly disappears under the cover Available in various anodized colors / End cap is always black Permanently secure fit through aluminum expansion sleeves Ø12+18 mm Weight per pair: 120g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles - 1 Pair Absolutely clean finish Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 140g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles - 1 Pair - Black Absolutely clean finish Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 360g Dimensions: see sketch

The tank bag cable is equipped on the vehicle side with a compact DIN angled plug and on the tank bag side with a USB twin charger (USB-A and USB-C). The tank bag cable is ideal for plugging into the standard onboard sockets of BMW, Triumph, and Ducati, or into a small retrofitted DIN onboard socket (SD14/22). It allows for easy charging of USB devices such as mobile phones, cameras, or other electrical consumers simply by placing them in the tank bag. – Compact DIN angled plug – USB-A and USB-C socket each 3.6A – No vehicle installation required – Power consumption only when the plug is inserted – 1.5 m cable

This touring screen features a spoiler at the end that can be manually adjusted to the desired position in seven stages. The airflow behind the spoiler reduces wind pressure on the rider while simultaneously minimizing turbulence. The Vario touring screen is available in clear and smoke gray.

Tool for BMW Motorcycles RoadTech B1 Item Description:  The perfect tool set for your BMW, made in CruzTools.BMW motorcycles are known for innovation, which also affects the type of screws used. The "female" Torx screws are becoming increasingly commonplace, whereas "male" Torx screws are still the exception. So you need a BMW to normal and special tools. Summing up these requirements together, it becomes clear that a unique tool set is essential! All meets these criteria, the RoadTech-B1 Werkzeugzeugset for BMW motorcycles from Cruz Tools. It includes high-quality tools and many other useful things in a robust roll-up case.  Contents: - Ring mouth key: 8mm, 10mm, 12mm, 13mm- wrench Six round: E10, E 12 infinitely adjustable crescent wrench 20.5cm length-locking pliers 14cm length-Mini-ratchet set 0.64 cm (1.4 " ) 5,08cm with extension (2 ") and 8mm, 10mm, 13mm, E8 Six round-Nüssen- Allen key: 3mm, 4m, 5mm, 6mm, 8mm - Special-22/19 mm-Achsadapter- hexagon round key: T20, T25 , T30, T40, T45, T50 screwdriver: 6-in-1 (2x cross, 2x slot 6mm and 8mm nut) - air pressure Gauge (kPa-scale -> 100 kPa = 1 bar!) - Other: screw lock, oil, cable ties

Adapter for connecting devices with a cigarette lighter plug to a motorcycle with a on-board network socket.

Top Line steering damper from YSS, gold anodized. Adjustable with 30 clicks. 78mm stroke. Mounting clamp for horizontal attachment to the motorcycle.Included are 2 mounting bushings 6mm for reduction.Mounting bolt: 8mm for clamp and damper arm. Technical Data: Stroke :   75 mm Piston Diameter :   18 mm Rod Diameter :   8 mm Clamp Hole :   6    8 mm Damper Arm Hole :   6    8 mm

Top Line steering damper from YSS, red anodized. Adjustable with 30 clicks. 78mm stroke. Mounting clamp for horizontal attachment to the motorcycle.Included are 2 mounting bushings 6mm for reduction.Mounting bolt: 8mm for clamp and damper arm.   75 Technical Data: Stroke :   75 mm Piston Diameter :   18 mm Rod Diameter :   8 mm Clamp Hole :   6    8 mm Damper Arm Hole :   6    8 mm