Oil Seal Corteco   Corteco seals in original quality are characterized by their outstanding sealing properties and a long service life.Technical Data:Inner Diameter:   8 mmOuter Diameter:   14 mmWidth:   4 mm

Oil Seal Corteco   Corteco seals in original quality are characterized by their outstanding sealing properties and a long service life.Technical Data:Inner Diameter:   16 mmOuter Diameter:   26 mmWidth:   7 mm

  Oil Seal    Technical Data:Inner Diameter:   20 mmOuter Diameter:   32 mmWidth:   8 mm

Shock Absorber Alternator   Attention: 3 pieces are required!  

Drive Shaft Damper Original Spare Part Damper shafts are used to absorb load changes in the drivetrain. This reduces load spikes at high speeds and during sudden braking.   Worn dampers are noticeable through increased play in the drivetrain and automatically lead to wear of the chain set.  

BMW R1200RS LC Carbon tank cover bottom right Side cover R 1200 RS LC item Description Side cover under the tank right - BMW R 1200 RS (LC) from 2015 onwards. The tank cover right Carbon replaces the original part using the original mounting points.  In the foreground weight savings are (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

Carbonfiber Side panel under the tank left side for BMW R 1250 RS starting from MY19 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

BMW R1200RS LC Carbon tank cover bottom right Side cover R 1200 RS LC item Description Side cover under the tank right - BMW R 1200 RS (LC) from 2015 onwards. The tank cover right Carbon replaces the original part using the original mounting points.  In the foreground weight savings are (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

Carbonfiber Side panel under the tank right side for BMW R 1250 RS starting MY19 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Side Stand

Is your bike leaning too much? Then our side stand extension for upright parking of the bike is just what you need.Especially with a "loaded" bike, it can happen that your motorcycle tips over in the original angle under unfavorable ground conditions. The adapter shoe provides the side stand with a corresponding extension, widening, and height increase, making it easier to stand upright.Simply slide it on and tighten the internal hex screw.You may need to smooth the original weld slightly. We have found that the welds can vary slightly even within the same model series. (Example image)Height increase: 17mmAll items have been mounted and tested on original motorcycles - without any modifications.

The brake lever cap increases the reachable area of the foot brake and extends it by 15 mm. It is suitable for brake levers with a round body of Ø 17 mm. Easy installation. Simply slide on and tighten the set screw.Length approx. 6.5 cm, inner Ø 17 mmColor silver Only suitable for brake levers with round rubber!All items have been mounted and tested on original motorcycles - without any modifications.

The brake lever cap increases the reachable area of the foot brake and extends it by 15 mm. It is suitable for brake levers with a round body of Ø 17 mm. Easy installation. Simply slide on and tighten the set screw.Length approx. 6.5 cm, inner Ø 17 mmColor silver Only suitable for brake levers with round rubber!All items have been mounted and tested on original motorcycles - without any modifications.

Vehicle-Specific Information:  from 01.08.1988 for 2 disc brakesSA Sintered Metal Street Brake Pads for Front (SA) A sintered mixture specifically designed for front wheel brakes that offers improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

n.v.

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

Swingarm Bearing Sleeve

Bolt

wasserdichte Smartphonetasche speziell für den Hepco&Becker Tankrucksack "Street Daypack" und "Royster" Smartphone lässt sich durch Hülle bedienen wird mittels kleiner Klettverschlüssel am Tankrucksack an 3 Punkten befestigt kann im Handumdrehen entfernt werden

Spacer ring for center stand   Stainless steel  

NGK Spark Plug   NGK is the world's leading manufacturer of spark plugs.   State-of-the-art production facilities, significant investments in research and development, as well as strong commitment to motorsport, from Formula 1 to motorcycle racing, make the NGK spark plug so successful.   - solid SAE nut

NGK Spark Plug   NGK is the world's leading manufacturer of spark plugs.   State-of-the-art production facilities, significant investments in research and development, as well as strong commitment to motorsports, from Formula 1 to motorcycle racing, make the NGK spark plug so successful.   - removable SAE nut 081961  

NGK Spark Plug   Package = Contents 2 pieces   NGK is the world's leading manufacturer of spark plugs.   State-of-the-art production facilities, significant investments in research and development, as well as strong commitment to motorsport, from Formula 1 to motorcycle racing, make the NGK spark plug so successful.

Bosch Spark Plug