Left Headlight Bracket   Attention: The headlight bracket is intended for unfaired models (2-valve, R series with air-cooled twin engine between 1974 and 1985).Please note that this bracket is designed for headlights with a larger mounting hole of 22 mm diameter on the left side.

NutTechnical Data:Type:   Hex Nuts For Thread Size:   M10 x 1.00 Self-locking:   No Wrench Size / SW:   17 mmMaterial:   Stainless Steel A2 Surface:   No Finishing Strength Class:   No Strength Class Color:   silver

Magnetic Oil Drain Plug with Seal Ring     Magnetic oil drain plugs collect metallic wear particles on the magnet and thus protect the engine from excessive wear!   Not suitable for Triumph Tiger 800 (internal hexagon) Technical Data:Thread:   M14 x 1.5 Length:   19 mmHead:   Hexagon Head Wrench Size:   19 mm Material:   Steel Color:   Gold For Safety Wire:   No Seal Ring/Washers:   Yes Magnetic:   Yes

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

Mahle Oil Filter - One-piece filter- Only for models without oil cooler As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology. Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine. Advantages of Mahle oil filters:- Cold start resistance provided by a stable pleat geometry- Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts- Load peaks of up to 20 bar are compensated by the high pressure resistance of the housing- Oil supply is ensured at all times by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a heavily contaminated filter element due to exceeding the change interval)- The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply upon engine start

Needle Sleeve

NGK Spark Plug Connector   The use of NGK spark plug connectors with suppression resistors provides optimal suppression of interference frequencies across all frequency ranges when used in conjunction with NGK spark plugs, without negatively affecting the engine's performance.   NGK spark plug connectors are equipped with a resistance element made of high-quality ceramic material. This ensures a constant resistance value with only slight deviation under overload conditions.          Technical Data:Type:   Connector Spark Thread Diameter:   14 mmConnection Type:   M4 connection thread Angle:   90° Resistance:   5 kiloohmsSuppressed:   Yes Material:   Phenolic resin Color:   black Cable Length:   without cable Integrated Ignition Coil:   No

Stainless Steel Nut

Vehicle-Specific Information:  Attention: Only suitable for fuel tap type "Germa"  O-Ring   Original spare part    Technical Data:Range:   No Inner Diameter:   12 mmOuter Diameter:   16 mmHeight:   2 mmMaterial:   Rubber Design:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

O-Ring for ATE Brake Caliper 2.84X2.62MMTechnical Data:Range:   No Inner Diameter:   2.62 mmOuter Diameter:   2.84 mmMaterial:   Rubber Design:   Round

O-Ring Athena   Athena, an international company founded in 1973, develops and manufactures seals, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement seals available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of seals with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

O-Ring YSS

O-Ring FlywheelTechnical Data:Range: No Inner Diameter: 53 mmOuter Diameter: 59 mmHeight: 3 mmMaterial: Rubber Design: round

O-Ring Oil Filter 44X4MM   Attention: Only for conical oil filter covers from 09/1976.        Technical Data:Range:   No Inner Diameter:   36 mmOuter Diameter:   44 mmHeight:   4 mmMaterial:   Rubber Design:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

51.9X45.3X0.3MM     Oil Filter Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Oil Filter Gasket Athena Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Hiflo Premium Oil Filter   The Hiflo Premium Oil Filters provide optimal benefits for the customer and impress with the best quality. Only high-quality materials are used in the manufacturing of the filters.   As the only filter manufacturer, Hiflo has its filters tested and certified by TÜV Süddeutschland. The filters are compared with the original filter in all relevant criteria. The test can only be passed successfully if the Hiflo filter meets or exceeds the values of the original filter. This ensures that all filters meet the quality requirements of the original equipment.   Hiflo also offers the largest range of filters for motorcycles and ATVs.

Mahle Oil Filter - Two-part filter with seals- For models without oil cooler As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology. Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine. Advantages of Mahle oil filters:- Cold start resistance provided by a stable pleat geometry- Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts- Load peaks of up to 20 bar are compensated by the high pressure resistance of the housing- Oil supply is ensured at all times by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a heavily contaminated filter element due to exceeding the change interval)- The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply during engine start

Mahle Oil Filter - Two-part filter- With seals- For models with oil cooler As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology. Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine. Advantages of Mahle oil filters:- Cold start resistance ensured by a stable pleat geometry- Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts- Load peaks of up to 20 bar are compensated by the high pressure resistance of the housing- Oil supply is ensured at all times by the pressure relief valve (in the case of thick oil, as is present during cold start phases or at low outside temperatures, as well as with a heavily contaminated filter element due to exceeding the change interval)- The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply during engine start

Timing Chain Original equipment manufacturer in the automotive, motorcycle, and motorsport sectors meets all requirements of modern high-performance engines reliable and precise engine control

BMW original spare part Oil filter with all necessary sealing rings

Piston Rod Set

Pressure ring 38mm on the exhaust

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.