waterproof easy to attach for Daypack 2.0 and Royster tank bags also suitable for tablets sturdy yet flexible back panel - no flapping!

For use of the Duonix Bikescan-100 with the OBD-II interface on BMW motorcycles.

Mahle Oil Filter   As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology.   Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine.   Advantages of Mahle oil filters:   - Cold start resistance ensured by a stable pleat geometry - Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts - Load peaks of up to 20 Bar are compensated by the high pressure resistance of the housing - Oil supply is always ensured by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a filter element that is heavily contaminated due to exceeding the change interval) - The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply upon engine start Fits the following vehicles: i3 I01 LCI   (01/2017 — 12/2019) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 12/2019) K22 (R nineT Pure)   (12/2015 — 12/2019) K23 (R nineT Scrambler)   (09/2015 — 12/2019) K32 (R nineT Racer)   (12/2015 — 07/2019) K33 (R nineT Urban G/S)   (03/2016 — 12/2019) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 12/2019) K61 (K 1600 Bagger)   (01/2017 — 12/2019) K83 (F 900 R)   (11/2018 — 12/2019) K84 (F 900 XR)   (11/2018 — 12/2019) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 12/2019) K19 (C 650 GT)   (01/2011 — 12/2019) K08 (C 400 GT)   (04/2018 — 12/2019) K09 (C 400 X)   (03/2018 — 12/2019)

Oil Level Check

Mahle oil filter cartridge As one of the world's leading filter manufacturers and OEMs for BMW motorcycles is Mahle has always stood for quality and technology. Oil filter Mahle keep dirt reliably from the lubrication circuit away to thereby obtain both the oil quality and the performance and efficiency of the engine. Mahle oil filter cartridges equipped made of sheet steel, deep-drawn and powder-coated housing for faster release of the filter with a polygon. Benefits of Mahle oil filters: - where cold start resistance by a stable pleat geometry - reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connectors - peak loads up to 20 bar are compensated by the high compressive strength of the housing - oil supply ensured by pressure relief valve at any time (for viscous oil, as it is placed in cold start phases or at low outside temperatures, as well as in a heavily contaminated by exceeding the change interval filter element) - return valve the emptying of the filter prevented when the engine and ensures at engine start rapid supply of oil

Backrest for top case for high comfort of the passenger

Zuverlässiger Wetterschutz: Die Fahrzeugabdeckhaube für den Außenbereich schützt das Motorrad auch unter freiem Himmel vor Nässe, Schmutz und anderen Umwelteinflüssen. Das hochwertige Nylon-Cover ist wasserdicht und verfügt über Belüftungsöffnungen sowie ein großes Sichtfenster im Bereich des Kennzeichens. Kordelzüge gewährleisten eine optimale Fixierung der Haube am Motorrad, die beiden Metallösen im Frontbereich lassen sich zur Diebstahlsicherung nutzen. Praktisch ist zudem die integrierte Tasche, in der das Cover bei Nichtgebrauch aufbewahrt werden kann. Die schwarze Abdeckhaube ist mit einem großen silberfarbenen BMW Motorrad Schriftzug versehen und für viele BMW Motorräder geeignet.   Zuverlässiger Wetterschutz. Praktische Handhabung.

With the self-adhesive HP label, the HP carbon parts can be further customized as desired. The silver lettering on a black background measures 22 x 9 mm. Self-adhesive HP label for customization. Dimensions: 22 x 9 mm.

BMW Motorrad Batterieladegerät Plus Das Batterieladegerät Plus ist ideal für konventionelle, wartungsfreie Akkus wie Gel-, Lithium-Ionen und AGM-Batterien geeignet. Es bietet eine prozessorgesteuerte Ladung und Ladeerhaltung und kann bequem über die Motorradsteckdose oder ein Adapterkabel genutzt werden. Dank integriertem Kurzschluss-, Verpolungs- und Überlastungsschutz ist ein sicherer Betrieb gewährleistet. Die kompakten Abmessungen (L x B x H) von 135 x 120 x 50 mm machen es einfach zu transportieren und verstauen.Wie auch schon beim Vorgänger ist dieses Ladegerät natürlich CAN-Bus fähig. D.h. der Zugang über die Bordsteckdose bleibt erhalten, auch wenn die Zündung komplett ausgeschaltet ist.Die Fahrzeugbatterie in Eurem BMW Motorrad wird es Euch danken! Was gibt es nervigeres als im Frühjahr wegen eine platten Batterie nicht starten zu können. Ihr braucht nur eine 220V Steckdose. Dann über di Bordsteckdose oder direkt an der Batterie anklemmen und vergessen! Fertig! Den Rest regelt das Ladegerät!

The comprehensive large first aid kit from BMW Motorrad complies with the DIN standard for motorcycle first aid kits and should not be missing from any motorcycle. It is specifically packed for motorcyclists and contains everything bikers need in an emergency in a space-saving nylon bag. In addition to a variety of adhesive bandages, dressings, first aid packages, a dressing cloth, and disposable gloves, it also includes scissors, a rescue blanket, cleaning wipes, and a first aid manual in the compact, water-repellent bag. The first aid kit can be comfortably and readily transported in the motorcycle's flex case. Its signal red color also makes it highly visible, ensuring it is quickly accessible in case of an emergency. This way, you can ride with greater safety – on every trip and every tour. First aid kit specifically for motorcyclists. Contents according to DIN standard for motorcycle first aid kits (DIN 13167). Water-repellent zippered nylon case. Scope of delivery: Contents in detail, complies with DIN 13167 1 adhesive bandage, 2.5 cm x 5 m 4 wound plasters, 10x6 cm 2 finger bandages, 2x12 cm 2 fingertip bandages 6 plaster strips, 2 sizes 2 first aid packages, 2 sizes 1 dressing cloth, 60x80 cm 4 disposable gloves, large 1 first aid scissors, 14.5 cm 1 rescue blanket, 210x160 cm 2 skin cleansing wipes 1 brochure "Immediate Measures" 1 table of contents

The lightweight, compact first aid kit from BMW Motorrad fits into any motorcycle and contains a basic supply for treating minor injuries. In addition to a variety of band-aids and disposable gloves, it also includes skin cleansing wipes, a quick bandage, and a rescue blanket in a water-repellent nylon bag. Its signal red color makes the first aid kit highly visible, ensuring it is quickly accessible in case of an emergency. A truly helpful companion that fits in any Flexcase and should not be missing from any motorcycle. Basic supply for minor injuries. Water-repellent zippered nylon case. Contents: Variety of band-aids Quick bandage (size 2) Skin cleansing wipes Disposable gloves Rescue blanket

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to work together. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free to move can it operate optimally!

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to work together. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free can it operate optimally!

The waterproof top case offers 28 liters of volume, providing enough space for a helmet and impresses both in everyday use and on short trips. It is made from a durable plastic mix in a double-shell design and features a modern-elegant yet discreet appearance. The weight is approximately 5.5 kilograms. Installation is simple and requires no additional parts on the vehicle's luggage rack. Waterproof. Storage volume of 28 liters. Space for a helmet.

The tank bag with an approximately 12-liter waterproof main compartment and a small parts compartment with a viewing window fits various BMW motorcycle models and allows for a combination with BMW motorcycle navigators. Functional tank bag Teflon-coated, washable outer material PE plastic bottom with non-slip silicone coating Waterproof main compartment, volume approx. 12 l 1 small parts compartment inside and on the lid, outside with viewing window Carrying handle on the front part of the bag Also compatible with BMW motorcycle navigator Maximum load: 5 kg Recommended maximum speed with tank bag: 160 km/h Color: Black/Grey Optional: Vario insert for tank bag for flexible division of the interior

Connection cable for the zumo 340/ 345/ 350/ 390/ 395/ 396 to the electrical system of your motorcycle.This connection cable fits the connector side of the optional Garmin motorcycle mount (01-065-0419-0). The open cable ends (+/-) are connected to the electrical system of your motorcycle. A fuse is integrated at the (+) pole. The cable can only be used together with the "optional" Garmin zumo 340/ 345/ 350/ 390/ 395/ 396 motorcycle mount (01-065-0419-0).

PRO Micro TankrucksackDezent und geradlinig: Der PRO Micro passt auf fast jeden Tank und transportiert sicher die kleinen Notwendigkeiten wie Fahrzeugpapiere und Wertsachen. Wie alle PRO Tankrucksäcke sitzt der Micro auf einer EVA-Kunststoff-Basis, die hohe Formstabilität garantiert. Mit Hilfe eines Reißverschlusses kann das Volumen des Tankrucksacks erweitert werden.Die PRO Tankrucksäcke bieten elegantes und zeitloses Design in Verbindung mit langlebigen Materialien und durchdachten Produkteigenschaften: Ballistic Nylon schützt das Gepäck vor Stößen, Wind und Wetter. Die Oberseite aus laminiertem EVA-Material gibt den Taschen eine markante Form und gewährleistet in Verbindung mit einem MOLLE-Aufsatz sicheren Halt für Smartphone- und Tablethalter. Die bereits ab Werk befestigte Führungsschiene des Oberrings erlaubt eine deutlich vereinfachte Anpassung des Tankrucksacks an die Form des Tanks und die ergonomischen Bedürfnisse des Fahrers. Diese Flexibilität bieten nur die PRO Tankrucksäcke. Passend dazu bietet SW-MOTECH die patentierten PRO Tankringe aus glasfaserverstärktem Kunststoff. Sie werden abgestimmt auf das Motorradmodell gefertigt. Der robuste PRO Tankring mit magnetischer Führungshilfe sichert die PRO Tankrucksäcke durch einen mechanischen QUICK-LOCK Rastverschluss. So lassen sich die Tankrucksäcke mit nur einem Handgriff befestigen oder abnehmen.Volumenerweiterung per Reißverschluss von 3 auf 5 LiterDer erforderliche PRO Tankring ist NICHT im Lieferumfang des PRO Tankrucksacks enthalten. Bitte verwende den Bike-Filter, um den richtigen PRO Tankring für Ihr Motorrad auszuwählen.Magnetische Führungshilfe im PRO Tankring für einfache BefestigungVormontierte Führungsschiene des Oberrings für ergonomische Anpassung des TankrucksacksOberseite und Boden des Tankrucksacks aus laminiertem und formstabilem EVA-MaterialAus robustem und besonders UV-beständigem 1680D Ballistic Nylon mit wasserabweisender InnenbeschichtungMOLLE-Aufsatz aus stabilem Hypalon-Material auf der Oberseite für Smartphone- und TablethalterReflektierende Details für bessere SichtbarkeitNetzfächer im InnerenWitterungsschutz durch mitgelieferte RegenhaubeRobuster TragegriffKabeldurchlass an der Vorder- und RückseiteMit Kabelschloss oder Diebstahlsicherung verwendbarLieferumfang1 x PRO Micro Tankrucksack1 x PRO Oberring1 x Regenhaube PRO MicroMontagematerialDetailsMaterial: 1680D Ballistic NylonFarbe: schwarz / grauMaße: 27,0 x 20,5 x 11,0 cmGesamtgewicht: ca. 0,8 kgGesamtvolumen: 3,0-5,0 lHinweisFür die Montage am Tank wird der passende PRO Tankring benötigt. Dieser ist separat erhältlich.Die Tankrucksäcke der PRO Serie sind nicht mit den EVO Tankringen kombinierbar.

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint Protection Film Set detailed instructions for application

Repair Kit for Fuel Pump Quick Coupling Spare Part for e.g. BMW R1200GS R1200R R1200RT K1200 .... This repair kit can be used to repair a leaking or broken connection on the fuel pump. The original screwed connections in the fuel pumps often have hairline cracks! Quick, cost-effective, and easy installation. Scope of delivery: 1 x Coupling nut part brass chrome-plated with shut-off, 3/8" NPT thread, fuel-resistant FKM sealFits:BMW R 1200 GS 2004-2012BMW R 1200 RT 2005-2013BMW R 900 RT 2005-2013BMW R 1200 R 2006-2013 BMW R 1200 GS Adventure 2005-2013BMW R1200 ST 2003-2007BMW R 1200 S 2004-2010 BMW K 1200 S K 1300 S 2003-2015 BMW K 1200 R K 1300 R 2004-2015 BMW K1200 R Sport BMW K 1200 GT K 1300 GT 2004-2010 Important Notes:CPC recommends using:Teflon tape or liquid sealant for thread sealing!Tighten the coupling by hand and then tighten it with a wrench for a maximum of 1-2 more turns!Never screw the thread in completely!With tapered threads, only the first three threads seal! During transport, the release pins on couplings with thumb buttons are often touched.As a result, the thumb button may be in the upper position, partially covering the opening.Please make sure to bring the thumb button to the lower position before connecting the plug! Original CPC product from the USA. No Chinese imitation!

Repair Kit for Fuel Pump CPC Quick Coupling Spare Part for Fuel Pump e.g. R1200GS R1200R R1200RT K1200.... see last image This repair kit can be used to repair a leaking or broken connection on the fuel pump. Original CPC with fuel-resistant rubber rings! Quick and easy installation. Scope of delivery: 1 x CPC coupling nut part plastic with shut-off, 3/8" NPT thread, FKM seal 1 x CPC angled connector brass chrome-plated with shut-off, 3/8" hose nozzle, FKM seal Attention important notes:CPC recommends for tapered threads:Teflon tape or liquid sealant for thread sealing!Tighten the coupling by hand and then tighten it with a wrench for a maximum of 1 – 2 more turns!Never fully screw in the thread!With tapered threads, only the first three threads seal anyway! During transport, the release pins on couplings with thumb buttons are often touched.As a result, the thumb button is in the upper position, partially covering the opening.Please make sure to bring the thumb button to the lower position before connecting the plug!

Footpeg Lowering Kit for R1200ST Rider incl. ABE We have now succeeded in providing a lowering kit for the R1200ST rider that does not require the side stand to be removed. The disadvantage we have calculated, that the side stand touches the mounting plate, is intentional and unavoidable. Otherwise, the lowering would not be possible, and it does not affect the lean angle. In this model, the adapters are not adjustable.With the adapters, you achieve a lowering of 30mm.The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, which means that the leg is insufficiently supplied with oxygen, leading to the dreaded varicose veins. Please note that on newer BMW models, nothing can be adjusted on the brake side anymore. However, you will quickly get used to the changed foot position, just as you do in a car.Please consider that lowering the footpeg also means less lean angle. The advantage of these adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without any modifications.

Protection against theft of the closure cap. Protection against unauthorized access and contamination of the oil. BMW Boxer lettering. Includes special angle wrench and O-ring. Additional Information