Skip to main content
Filter
120/70ZR17 (58W) TL Front Tire Bridgestone T31 GT
BATTLAX-T31TOURING MOTORCYCLE TIRE The special features of the new Battlax Sport Touring T31 lie in the improved performance in wet conditions and the maximum contact feel with the road. This allows the rider to feel safer in any weather while enjoying the fun and thrill of the ride.   Bridgestone employs advanced NanoPro-Tech™ technology in the front tire, which increases the silica content at the molecular level in the rubber compound. This not only improves the flexibility of the rubber but also enhances grip on various surfaces as well as in wet and low-temperature conditions.   The rear tire features a 3LC rubber compound with a cap-and-base structure: the softer outer rubber compound provides outstanding grip, while the inner compound is more stable and gives the tire optimal stiffness.   The tread pattern of the T31 has a higher number of grooves in the shoulder area, allowing for better water drainage. In the central area of the rear tire, there are only a few grooves. This guarantees stability, especially at high speeds. The contact area is also up to 7 percent larger, which offers an added safety advantage, particularly when cornering.Technical Data:Width:   120 Aspect Ratio:   70 % of widthConstruction:   R (Radial tire) Rim Diameter:   17 inchesLoad Index:   58 Speed Index:   (W) >270 km/h Profile:   T31 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

€153.07*
120/70ZR17 (58W) TL Front Tire Bridgestone T32 GT
Battlax Sport Touring T32 the new benchmark in the sport touring segment     7% shorter braking distance in wet conditions 13% larger contact area at the rear Increased profile ratio (3% front - 6% rear) New Pulse Groove Pattern Design technology Enhanced contact feel with neutral and linear handling Improved in all performance ranges High mileage (on T31 level) Technical Data:Width:   120 Aspect Ratio:   70 % of widthConstruction:   R (Radial tire) Rim Diameter:   17 inchesLoad Index:   58 Speed Index:   (W) >270 km/h Profile:   T32 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

€176.75*
Additional Bag High Visibility Size S 2 Liters Yellow/Black by Touratech Waterproof
To be placed on the Rack-Pack, Travel-Zip, or as side bags. These bags allow you to store small items that would otherwise get lost in the vastness of large packing bags. They are also useful for keeping the first aid kit readily accessible. The clever attachment allows the bag to be quickly removed without tools.Best visibility and thus safety!Due to its exposed position, the neon yellow Cordura bag is visible from all sides, providing additional safety. It is never obscured by the rider, and woven reflective threads bounce back any incoming light strikingly at night.Material: PU-coated CORDURA®, dustproof and waterproof (IP64)Size: SColor: neon yellowCapacity: 2.0 litersWeight: 105 g

€39.90*
Adjustable Footpeg Lowering Kit 35mm for BMW R1150RS
Footpeg Lowering Kit Adjustable for BMW R1150RSType R11R and Type R21 according to vehicle registration including ABE With the new footpeg adapter, no wish remains unfulfilled.As diverse as its adjustment options are, so are its applications.The adapter in its basic form fits 98% of all motorcycle models.Its adjustability is complemented by a universal adapter for a 35 mm lowering. It is adjustable in increments of 4°. Generally, the basic adapter can be mounted either upwards or downwards. This allows you to achieve a natural ergonomics and a healthier sitting position.The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, resulting in insufficient oxygen supply to the leg, which can lead to the dreaded varicose veins.After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, keeping the distance to the shift and brake lever relatively constant. Please note that on newer BMW models, nothing can be adjusted on the brake side. However, you will quickly get used to the changed foot position, just as you do in a car.Please consider that lowering the footpeg also means less lean angle.The advantage of these adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

€157.38*
Adjustable Mono Shock Absorber Rear YSS for BMW R 1150 RS RT
Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

€492.37*
Adjustable Mono Shock Absorber Rear YSS for BMW R1150RS
Machined aluminum body, shock absorber adjustable in spring preload and rebound (30 clicks). The adjustment of the spring preload is connected to the damper via a hose, making access easier. The length of the damper is adjustable by +-5mm.

€470.21*
Adjustable Paralever Strut for BMW R1100RT R1150RT R850R R1100R R1100RT R1150RS
Parallel Bracing for BMW R850-1100R, R1100-R1150RS, R1100RT-R1150RTAdjustability axially: possible in 2 minutes!Combine function and design with the adjustable parallel bracing.The axial adjustability allows for a higher setup, bringing the chassis into a sportier position, which positively affects the steering behavior during rapid successive corners.This also provides greater ground and lean angle clearance, which is particularly desired in racing conditions.In addition to the technical aspect, the visual aspect is also improved.With a quick adjustability of about 2 minutes, you can customize your vehicle at any time.Our parallel bracing is suitable for any motorcycle with Paralever.Adjustability for:K1200RS/GT-05 - 12 mmR1100-1150GS - 15 mmR850R-R1100R - 15 mmR850R-R1150R - 15 mmR1100RS/R1150RS - 15 mmR1100RT/R1150RT - 15 mmR1100S - 30 mmAll items have been mounted and tested on original motorcycles - without aftermarket modifications. !!!! Delivery time 3 - 4 weeks !!!!

€463.62*
Adjustable passenger footpeg lowering 60mm ABE for BMW R1150RS
Footpeg Lowering Kit Adjustable for BMW R1150RS incl. ABE With the new footpeg adapter for your BMW, no wish remains unfulfilled. As diverse as its adjustment options are, so are its applications. The adapter in its basic form fits 98% of all motorcycle models. The optimal leg angle is 90°. A bent leg angle also constricts the blood vessels, thus not supplying the leg with enough oxygen. This leads to the dreaded varicose veins.The adapter lowers the peg by 60 mm. Generally, the basic adapter can be mounted upwards or downwards. This allows you to achieve a natural ergonomics and a healthier sitting position.After installation, the adapters can be adjusted by 4° each, so that the footpeg is positioned vertically downwards. The passenger even has the advantage of being able to adjust the peg upwards if there is enough space. Thus, the kit is, for example, the optimal addition for a motorcycle child seat. Here, the feet always fit on the pegs. Depending on the setting, the passenger achieves a healthy and comfortable leg position. As with all adjustable products, the footpeg adapter is also characterized by its "quick" adjustability. With just a few hand movements and an Allen key, the adapter can be adjusted, for example, from "high to low".Please keep in mind that lowering the footpeg also means less lean angle. The advantage of the adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

€181.13*
AirMan Tour Air Compressor Pump for Motorcycles / Bicycles / Balls etc.
With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

€29.90*
Alternator Generator 50A for BMW R 1100 GS R RS RT S R 1150 GS Adventure R Rockster
Offered here is a used part Vehicle: R1200C Manufacturer: BMW Condition: normal signs of use Description: sold as shown Part number: 12312306020

€20.00*
Angled USB-C Standard Plug, 12-24V / 5V, max. 3A Cigarette Lighter and Onboard Network Sockets
For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

€29.90*
AP37 Interface Cable BMW Road 10PIN Texa
TEXA Adapter Cable for Motorcycle Control Unit Diagnosis Adapter cable 3151/AP37 for serial diagnosis of the manufacturer BMW. Compatible with all vehicles from the production year 1999 to August 2016. Not compatible with Euro-4 vehicles (manufactured from September 2016) with OBD socket. The cable can also be used for the manufacturers GG TECHNIK, ROSENBAUER and on the models HUSQVARNA Nuda 900/R, TR 650 Strada, TR 650 Terra.

€258.23*
Athena Shaft Seal 25X40X6 mm for BMW R1200C R1200CL R1150 RS RT GS + Adventure R
Oil Seal Athena These are of higher quality than the OEM seals and guarantee remarkable performance and resistance to high temperatures and wear.Technical Data:Inner Diameter:   25 mmOuter Diameter:   40 mmWidth:   6 mm

€9.52*
Badge - D=45MM e.g. for BMW R1100GS R1150GS F650 F650ST F650GS R90/6 K1200RS 52532325201
Original BMW Spare Part Badge Emblem Logo D=45 mm BMW Full Fairing for example R90S Topcase F650GS... Additional Information The part with the BMW part number 52 53 2 325 201 is used on the following vehicles:

€18.26*
Badge - D=58MM for example BMW E36 R1200GS HP4Race R850R 51148164924
Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

€48.71*
Badge - D=70MM e.g. for BMW R80G/S R80ST R90S R1100R R1100RS R1150RS K1100LT 46637686746
Original BMW Spare Part Additional Information The part with the BMW part number 46 63 7 686 746 is used on the following vehicles:    

€24.34*
Badge Emblem D=21MM Logo BMW for Luggage Rack Top Case e.g. R1150GS Adv.
Original BMW Spare Part / Accessory Diameter 21 mm

€12.17*
Ball Bearing 61917 C3 85X120X18MM for BMW R1100GS R1150GS R1200C R100GS R80ST
Ball Bearing

€171.84*
Battery Charger JMP Skan 1.06/12V 1A for BMW Motorcycles
JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

€54.85*
Battery Charger Motorcycle JMP Skan 4.0 12V 1A-4A
JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

€71.69*
Bellows rear drive black for BMW R1150 K 100 1100 1200
Original BMW Bellows Rear Swingarm BMW Part Number: 33171452504

€55.51*
Benzinpumpe Kraftstoffpumpe mit Sieb für BMW R 850 1100 1150 R RT GS RS
QUICK & EASY DROP-IN INSTALLATION Spüren Sie den Leistungsunterschied! ENTWICKELT, UM DIE LEISTUNG ZU VERBESSERN UND LANGLEBIGKEIT ZU GARANTIEREN. Entwickelt und konstruiert für einen problemlosen Betrieb von mehr als 2.500 Stunden oder 100.000 Meilen. Verbesserte Polymere, Bürsten und Kommutatoren garantieren einen gleichmäßigen Durchfluss, eine gleichmäßige Stromaufnahme und einen leisen Betrieb. Ersetzt die BMW Teilenummer 16141341231.  

€99.00*
Black bellows final drive for BMW R1100GS R1100RS R1100RT R1150GS R100GS K1200LT
Bellows for Rear Swingarm

€39.75*
Black keychain for BMW motorcycle
BMW Keychain

€5.47*

R1150RS


Welcome to the category for BMW Sport R1150RS spare parts & accessories.

Here you will find a wide selection of high-quality spare parts and accessories for your motorcycle.

  • High-quality spare parts for the BMW Sport R1150RS
  • Diverse accessories for a personalized adjustment
  • Great prices and fast delivery
  • Expert advice and support in selection

Browse our range and find the right parts for your motorcycle.

Order now and take advantage of our offers!

Produktempfehlungen:

Tip
Action bundle 1: Engine protection *RALLYE* + Engine crash bars for Honda CRF1000L Africa Twin
With the RALLYE engine protection for the Honda CRF1000L Africa Twin, we combine state-of-the-art manufacturing techniques with unique design for the best possible protection. The Touratech engine crash bars provide optimal protection for the important side covers of the engine. Its slim design allows for riding challenging single trails off-road while not restricting lean angles on the road in any way.Note: Not suitable for Honda CRF1000L Africa Twin with DCTOnly in conjunction with the original exhaust manifold

€399.00*
Tip
BMW Motorrad Jacket Moreno Connect GORE-TEX
Details The Moreno Connect GORE-TEX jacket combines a discreet look with excellent functionality. The three-layer outer material keeps the jacket waterproof, while generous ventilation options ensure an optimal climate. Back and joint protectors provide a high level of safety even off paved roads. The integrated heated vest can be controlled via smartphone or motorcycle. Active lighting on the back and sleeves ensures better visibility at night.Product HighlightsRobust, waterproof touring jacketOptimal ventilation through numerous zippers and AirVent insertsThree-layer outer materialSafety featuresNP2 joint protectorsNP Pro back protectorSafety FeaturesNP2 joint protectorsNP Pro back protectorFunctionalityTwo waterproof pockets on the front, one large pocket on the backCollar closure with VelcroInfinitely adjustable sleeve adjustment with VelcroStorm cuff at the sleeve hemsLeg closure with infinitely adjustable VelcroWaist adjustmentWaist adjustment, Velcro with diversionShort and continuous connecting zipperAdditional windbreaker in the jacket hem (similar to a winter sports jacket)Extra-large hanger loopIntegrated heated vestActive lighting on the back and sleeves for better visibility at night or in poor visibility conditionsWaterproof, washable, and integrated light guideTouch panel with on and off switchControl unit for operating the Connect functions of the heated vest and lightingControl unit can be connected to the BMW Motorrad Connected AppPower supply for the control unit via power bank or directly from the motorcycleThree inner pockets, one designed as a charging pocket for the smartphoneWaterproof up to a water column of 28,000 mmKey DataMaterial composition:Outer material 1: Layer 1 100% nylon, Layer 2 100% expanded polytetrafluoroethyleneOuter material 2 (insert): Layer 1 92% nylon, 9% elastane, Layer 2 69% nylon, 31% elastaneLining: 100% polyester

€1,627.00*
Tip
Clutch Release Lever Clutch Lever for BMW R 850 1100 R RS RT GS 23131340829
Clutch Release Lever Clutch Lever for R850 + R1100 transmission with clutch cable Improved version Due to numerous requests from you, we have searched for a solution to a common problem and developed this improved clutch release lever. It is mounted on the back of the transmission and accommodates the clutch cable. Never again should your tour abruptly end somewhere in the middle of nowhere. The clutch release levers often break at the bottom of the transmission. Original spare parts are often unavailable. Therefore, we have manufactured a reinforced clutch lever from high-strength aluminum. We have increased the material thickness by about 30%. During the next transmission repair or clutch replacement, this lever can replace the original, reducing a critical point on your motorcycle. Alternatively, you can take it as a spare part (emergency tool) on your travels for emergencies. We have already saved some of you on vacation, trips, or tours with a DHL Express delivery. This option is, of course, also available. As roadside assistance, we ship spare parts, like this lever, as well as many other items, around the globe to help you. This lever corresponds to the BMW ETK part number 23131340829. The lever 23 13 1 340 829 fits the following vehicles: R 850 GS Type 259 R 1100 GS Type 259 R 850 R Type 259 R 1100 R Type 259 R 850 RT Type 259 R 1100 RT Type 259 R 1100 RS Type 259 NOTE: The original bearing sleeve and adjustment screw must be retained!

€150.00*
Tip
Clutch Release Lever Clutch Lever for BMW R 850 1100 R RS RT GS 23131340829
Clutch Release Lever Clutch Lever for R850 + R1100 transmission with clutch cable Improved version Due to numerous requests from you, we have searched for a solution to a common problem and developed this improved clutch release lever. It is mounted on the back of the transmission and accommodates the clutch cable. Never again should your tour abruptly end somewhere in the middle of nowhere. The clutch release levers often break at the bottom of the transmission. Original spare parts are often unavailable. Therefore, we have manufactured a reinforced clutch lever from high-strength aluminum. We have increased the material thickness by about 30%. During the next transmission repair or clutch replacement, this lever can replace the original, reducing a critical point on your motorcycle. Alternatively, you can take it as a spare part (emergency tool) on your travels for emergencies. We have already saved some of you on vacation, trips, or tours with a DHL Express delivery. This option is, of course, also available. As roadside assistance, we ship spare parts, like this lever, as well as many other items, around the globe to help you. This lever corresponds to the BMW ETK part number 23131340829. The lever 23 13 1 340 829 fits the following vehicles: R 850 GS Type 259 R 1100 GS Type 259 R 850 R Type 259 R 1100 R Type 259 R 850 RT Type 259 R 1100 RT Type 259 R 1100 RS Type 259 NOTE: The original bearing sleeve and adjustment screw must be retained!

€70.00*
Tip
Repair kit for fuel pump quick coupling brass replacement for BMW R 1200 R GS RT
Repair Kit for Fuel Pump Quick Coupling Spare Part for e.g. BMW R1200GS R1200R R1200RT K1200 .... This repair kit can be used to repair a leaking or broken connection on the fuel pump. The original screwed connections in the fuel pumps often have hairline cracks! Quick, cost-effective, and easy installation. Scope of delivery: 1 x Coupling nut part brass chrome-plated with shut-off, 3/8" NPT thread, fuel-resistant FKM sealFits:BMW R 1200 GS 2004-2012BMW R 1200 RT 2005-2013BMW R 900 RT 2005-2013BMW R 1200 R 2006-2013 BMW R 1200 GS Adventure 2005-2013BMW R1200 ST 2003-2007BMW R 1200 S 2004-2010 BMW K 1200 S K 1300 S 2003-2015 BMW K 1200 R K 1300 R 2004-2015 BMW K1200 R Sport BMW K 1200 GT K 1300 GT 2004-2010 Important Notes:CPC recommends using:Teflon tape or liquid sealant for thread sealing!Tighten the coupling by hand and then tighten it with a wrench for a maximum of 1-2 more turns!Never screw the thread in completely!With tapered threads, only the first three threads seal! During transport, the release pins on couplings with thumb buttons are often touched.As a result, the thumb button may be in the upper position, partially covering the opening.Please make sure to bring the thumb button to the lower position before connecting the plug! Original CPC product from the USA. No Chinese imitation!

€34.95*
Tip
Repair kit for fuel pump quick coupling brass replacement for BMW R 1200 R RT GS K 1200
Repair Kit for Fuel Pump CPC Quick Coupling Spare Part for Fuel Pump e.g. R1200GS R1200R R1200RT K1200.... see last image This repair kit can be used to repair a leaking or broken connection on the fuel pump. Original CPC with fuel-resistant rubber rings! Quick and easy installation. Scope of delivery: 1 x CPC coupling nut part plastic with shut-off, 3/8" NPT thread, FKM seal 1 x CPC angled connector brass chrome-plated with shut-off, 3/8" hose nozzle, FKM seal Attention important notes:CPC recommends for tapered threads:Teflon tape or liquid sealant for thread sealing!Tighten the coupling by hand and then tighten it with a wrench for a maximum of 1 – 2 more turns!Never fully screw in the thread!With tapered threads, only the first three threads seal anyway! During transport, the release pins on couplings with thumb buttons are often touched.As a result, the thumb button is in the upper position, partially covering the opening.Please make sure to bring the thumb button to the lower position before connecting the plug!

€45.95*
Tip
Touratech Crash Bars Stainless Steel for BMW F850GS/F750GS
The crash bar is made from high-quality, electropolished stainless steel and expands the range of use for your adventure motorcycle. The two-part crash bar has been positioned as closely as possible to the vehicle to harmoniously integrate it into the existing vehicle design. Its special construction ensures optimal force distribution and largely protects not only the radiator but also the tank and fairing from damage. The crash bar is easy to install, resistant to rust, and easy to maintain.

€329.90*