Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with the appropriate fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by the magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Rubberized zipper Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessory: security lock Carrying handle Very low weight Recommended load capacity: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Special accessories for Hepco&Becker Gobi side cases. The construction of the GOBI side case, made of two honeycomb-connected shells, creates a 3.5-liter cavity between the inner and outer case shell. This can be made available with this faucet.

waterproof easy to attach for Daypack 2.0 and Royster tank bags also suitable for tablets sturdy yet flexible back panel - no flapping!

6KT Screw

Ignition Contact

BMW R100CS R100 / 7 Complete - Carrier black For models with two spring legs. The indicator lights remain in their original position. (Example Picture!!!) Combination of Porter and TopcasträgerEine special form of our porters are the Kompletträger consisting of a side racks and a luggage rack as Topcaseträger.Beide can werden.Die only mounted together facts: • Especially for Hepco & Becker cases and bags designed • Cases and carriers in one hand - no additional costs for further adapters • metal pipes manufactured by German steel forge with high quality chrome plating or plastic coating • Comprehensive, easy-to-follow installation instructions • screwed to the MotorradFür all Hepco & Becker side cases and top case Model: R 100 CS / R100 / 7-1985

EBC Prolite Brake Disc Floating, Full Floater. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc coating, which wears off in the brake pad contact zone during the bedding-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Brake ring made from forged HPSR steel with low carbon content, machined. - Therefore, no warping of the brake disc even under maximum load. - No glazing of the braking surface, thus the coefficient of friction remains constant. - Braking surface drilled with an optimized hole pattern. - Galvanized for protection against corrosion. - Hub made from anodized aluminum. - Minimal manufacturing tolerances. - Independent design.Technical Data:Outer Diameter:   260 mmInner Diameter:   62.2 mmBolt Circle:   79 mmNumber of Holes:   5 Hole Diameter:   8.5 mmThickness:   5 mmOffset:   35.8 mmDesign:   floating Manufacturer:   EBC

Footpeg

Pivot Shaft Diameter: 15.5mm

  Stud Bolt Rocker Arm Stainless SteelTechnical Data:Type:   Stud Bolts Thread:   M6 x 1.00 Length:   40 mmHead:   None Drive:   None Surface:   No Finish Material:   Steel Quality:   No Quality Class O-Ring/Washers:   None Manufacturer:   Other

Main Brake Cylinder 13mm

Main Brake Cylinder 14mm

Push Rod Main Brake Cylinder

Main Brake Cylinder 16mm

Main Brake Cylinder Repair Kit ATE 17mm

Socket for main stand     Dimensions: - Outer: 24mm - Inner: 10mm - Height: 13.5mm  

Timing Chain

Needle Sleeve

Nut

O-Ring Athena   Athena, an international company founded in 1973, develops and manufactures seals, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement seals available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of seals with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

O-ring for fuel tap Original spare part

O-Ring FlywheelTechnical Data:Range: No Inner Diameter: 53 mmOuter Diameter: 59 mmHeight: 3 mmMaterial: Rubber Design: round

  O-Ring Fuel Pressure RegulatorTechnical Data:Range:   No Inner Diameter:   5 mmOuter Diameter:   8 mmHeight:   1.5 mmMaterial:   Rubber Design:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

JMP oil temperature gauge / analogue display The original oil filler plug must be replaced with direct knife. Please note that the probe often only with geschleudertem oil wetted on .A measurement example Therefore, the oil drain plug results in a different value. Danger Please carefully compare the thread diameter, pitch and length of the oil dipstick with the replacement part !!!!!!!! Dimensions: - thread x pitch: 26 x 1.5 mm - Thread length: 9 mm - Total needle length: 298 mm - Exposed needle length: 280 mm No reason for complaint The bubble in the sight glass assures the compensation of the damping oil when heated!