Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1150RT Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 34117670392

Die Festscheiben der Brembo Oro-Serie werden in einem Guss aus Edelstahl hergestellt. Die Fertigung entspricht hierbei den strengen Toleranzen im Bezug auf die Konstruktions- und Bauart. Durch die Bearbeitungszyklen wird eine maximale Eignung und Rundlaufsicherheit gewährleistet.   Brembo konnte aufgrund seiner umfangreichen Erfahrung die geeigneten Formen, Toleranzen und Größen für jeden Motorradtyp und Einsatz bestimmen. Tatsächlich verbessert die spezielle Formgebung der Brembo-Scheiben durch eine sorgfältige Untersuchung der Bearbeitungstoleranzen die Übertragung des Bremsmoments und bietet gleichzeitig eine verbesserte Resistenz gegen mechanische und thermische Belastungen.

The carbon battery cover for the BMW K 1200/1300 S models replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part is manufactured entirely from prepreg (see FAQ) according to the latest guidelines in an autoclave and, as is customary with us, is coated with a clear plastic layer for protection against environmental influences.This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically,it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The carbon clutch cover for the BMW K 1200 S (2005-2008) / K 1200 R (2005-2008) / BMW K 1200 R Sport (2007-2011) / K 1300 S (2008-present) / K 1300 R (2008-present) significantly emphasizes the sporty and dynamic character of the motorcycle. This product replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original component) and increased stiffness. The carbon part is made entirely from prepreg material (see FAQ) according to the latest guidelines in an autoclave, and in the next step, as is customary for us, it is coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also enhances the three-dimensional effect of the carbon structure.

The fairing covers for the lights in carbon for the BMW K 1300 S enhance the vehicle and provide additional protection against damage. The installation of the parts is done using the included adhesive strips and/or the use of original mounting points. The carbon part has been completely manufactured in the autoclave from prepreg material (see FAQ) according to the latest guidelines and, as is customary with us, has been coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

The side fairing in carbon for the BMW K 1300 S is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side fairing in carbon for the BMW K 1300 S is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

The front fairing in carbon for the BMW K 1300 S is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The design of our front fender in carbon for the BMW K 1200 S (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 S (2008-now) is noticeably smaller compared to the original. This lends the motorcycle a notably sportier appearance. and special attention was again paid to this product&rsquos splash water protection. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front exhaust cover in carbon for BMW K 1300 S (2008-now) / K 1300 R (2008-now) models is made from a special high-temperature prepreg carbon material using a special autoclave method to keep discolouration of the carbon fibre at a minimum under extreme heat. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

The Handlebar Conversion for Your BMW K1300Sincluding brake and clutch lines including ABE You definitely do not want to miss out on the clip-on look of your new motorcycle with sport handlebars? However, sometimes you would like to bring the handlebars a little closer.The new handlebar conversion makes it possible. The handlebars come towards you by a full 85 mm. Additionally, there is a circular adjustment option that allows you to position the stub a bit further forward or backward. This achieves a natural ergonomics for a healthier sitting position.For the K1300S model, a longer brake hose and an extension for the clutch line are required. Everything is included in the respective set. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

The new handlebar conversion for your BMW K1300S incl. ABEWe have now also completed the short version for the sport-oriented rider. This achieves an adjustment range of 50 mm compared to the previous adapter of 85 mm. This provides a natural ergonomics for a healthier sitting position. For the K1300S, a clutch line extension is required. This is included in the set. All items have been mounted and tested on original motorcycles - without any modifications.

The heelguards in carbon for the BMW K 1200 S (2005-2008) / K 1200 R (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 S (2008-now) / K 1300 R (2008-now) Models are an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters for top case attachment are required high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) Luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Model-specific top case carrier for many H&B top cases. Difference Alurack/Easyrack: Easyrack bracket is foldable, Alurack bracket stands rigidly upwards. (Universal top cases with plastic plate do not fit)

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag