The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

The design of our front fender in carbon for the BMW K 1200 S (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 S (2008-now) is noticeably smaller compared to the original. This lends the motorcycle a notably sportier appearance. and special attention was again paid to this product&rsquos splash water protection. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front exhaust cover in carbon for BMW K 1200 S (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 R (2008-now) models is made from a special high-temperature prepreg carbon material using a special autoclave method to keep discolouration of the carbon fibre at a minimum under extreme heat. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Gasgriff Heizgriff rechts für BMW K1200S K1200R + Sport F800 S ST F650GS Twin F800GSAngeboten wird hier ein NeuteilFahrzeug: K1200S K1200R + Sport F800S F800ST F650GS F800STHersteller: BMWZustand: NeuwertigBeschreibung: wird verkauft wie abgebildetTeilenummer: 61317708286

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

The new handlebar conversion for your BMW K1200S and K1200R and Sportincluding ABE We have now also completed the short version for the sport-oriented rider. This achieves an adjustment range of 50 mm compared to the previous adapter of 85 mm.This provides a natural ergonomics for a healthier sitting position.The adapters for the K1200S up to 2006 fit without any modification of the lines. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

The heelguards in carbon for the BMW K 1200 S (2005-2008) / K 1200 R (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 S (2008-now) / K 1300 R (2008-now) Models are an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters for top case attachment are required high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) Luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Model-specific top case carrier for many H&B top cases. Difference Alurack/Easyrack: Easyrack bracket is foldable, Alurack bracket stands rigidly upwards. (Universal top cases with plastic plate do not fit)

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

compatible with most Hepco&Becker side case carriers. (Please note any potential restrictions in the model-specific notes of the carrier) suitable for one helmet and more includes key and locking cylinder includes lock adapter to secure the case to the side case carrier waterproof thanks to special sealing cover is screwed on and can be painted in vehicle color if needed integrated bumper protects against minor bumps case shell made of impact-resistant, molded plastic cases can be keyed alike to existing cases or top cases.Please enter the key number in the comments field during the ordering process. Scope of delivery: right side case + left side case + 2x lock adapters optional inner bags available in the accessory program Recommended load: 10kg per side case (Please note the model-specific notes of the respective carrier, as well as the motorcycle manufacturer-specific information)

The special Journey Topcase 30 is delivered with a universal mounting plate and installation accessories. This allows for attachment to almost any third-party luggage rack with a flat mounting surface, for which we do not offer a model-specific top case rack. not compatible with Hepco&Becker tube luggage racks, Alurack luggage racks, or Easyrack luggage racks waterproof case shell made of impact-resistant plastic includes universal mounting plate and installation materials includes key and lock cylinder extensive range of accessories available suitable for one helmet Recommended load: 3-5kg in the top case (Please note the model-specific instructions for each rack, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag.

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with a compatible fuel cap.The principle of operation of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the sides of the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the product family of Royster side bags and the Royster rear bag No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Waterproof, integrated inner bag with roll closure Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessories: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with a compatible fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The ribs attached to the sides of the magnets mechanically secure the system. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Waterproof, integrated inner bag with roll closure Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessories: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with the appropriate fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Rubberized zipper Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessory: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with the appropriate fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by the magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Rubberized zipper Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessory: security lock Carrying handle Very low weight Recommended load capacity: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Special accessories for Hepco&Becker Gobi side cases. The construction of the GOBI side case, made of two honeycomb-connected shells, creates a 3.5-liter cavity between the inner and outer case shell. This can be made available with this faucet.

waterproof easy to attach for Daypack 2.0 and Royster tank bags also suitable for tablets sturdy yet flexible back panel - no flapping!

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

Manufacturer: BMW Condition: NEW Description: sold as shown, D = 70mm Part Number: 51147721222 Fits:

Zuverlässiger Wetterschutz: Die Fahrzeugabdeckhaube für den Außenbereich schützt das Motorrad auch unter freiem Himmel vor Nässe, Schmutz und anderen Umwelteinflüssen. Das hochwertige Nylon-Cover ist wasserdicht und verfügt über Belüftungsöffnungen sowie ein großes Sichtfenster im Bereich des Kennzeichens. Kordelzüge gewährleisten eine optimale Fixierung der Haube am Motorrad, die beiden Metallösen im Frontbereich lassen sich zur Diebstahlsicherung nutzen. Praktisch ist zudem die integrierte Tasche, in der das Cover bei Nichtgebrauch aufbewahrt werden kann. Die schwarze Abdeckhaube ist mit einem großen silberfarbenen BMW Motorrad Schriftzug versehen und für viele BMW Motorräder geeignet.   Zuverlässiger Wetterschutz. Praktische Handhabung.

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to work together. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free to move can it operate optimally!