With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

Angeboten wird hier ein Neuteil Fahrzeug: K25 R1200GS, R1200GS Adv., HP2 Enduro, HP2 Megamoto, HP2 Sport, RnineT, R900RT, R1200RT, R1200R, R1200ST, R1200S, F650GS Twin, F800GS, ..... Hersteller: BMW Neupreis: 172,54 € Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 13548406249 

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

The clever design choice for the carbon fender makes it appear slimmer. yet the rear fender was designed very wide to minimize splashing water and enhance the protection. The front fender for the BMW F 800 S / ST (2006-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Front wheel hub cover for the hole in the wheel mount - for your F800R-F800S-F800ST All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

Gasgriff Heizgriff rechts für BMW K1200S K1200R + Sport F800 S ST F650GS Twin F800GSAngeboten wird hier ein NeuteilFahrzeug: K1200S K1200R + Sport F800S F800ST F650GS F800STHersteller: BMWZustand: NeuwertigBeschreibung: wird verkauft wie abgebildetTeilenummer: 61317708286

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Workshop grip protectors to protect the motorcycle grips. Material: Neoprene.

The handlebar adapter brings the handlebar of the BMW F800S 50 mm closer to the rider while maintaining the sporty look.This achieves a natural ergonomics for a healthier sitting position.Includes ABEDuring the conversion, a extension adapter must be attached to the brake line, and the brake must be bled afterwards.This can only be performed by a workshop!All other cables and lines fit.To ensure you can make the required fixing hole without any issues, we have created a drilling template that prevents the drill from wandering. All items have been mounted and tested on original motorcycles - without any modifications.

Standfest. Stabil. Einfach zu bedienen. Die Hauptständer von Hepco&Becker schränken die Schräglagenfreiheit beim Fahren meist nicht ein und sind extrem robust. Dank ausgefeilter Geometrie und rutschfester Trittfläche ist es ganz einfach in jeder Situation das Motorrad sicher abzustellen.Die präzise gefertigten Ständer sind sehr stabil, sandgetrahlt, grundiert und schwarz pulverbeschichtet und daher wetter- und wertbeständig. Hauptständer vereinfachen Wartungsarbeiten und sorgen für einen sicheren Stand, z.B. beim Tanken. Beim Überwintern entlasten sie die Federelemente und das Hinterrad.ABE wird mitgeliefertmeist keine Einschränkung der Schräglagenfreiheithochwertiges OberflächenfinishLieferumfang: Hauptständer+ Montagematerial + Anleitungbitte beachten Sie die hinterlegte AnbauanleitungHilfreiches Werkzeug zum Einhängen der Zugfeder: Artikelnummer: 700030

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

compatible with most Hepco&Becker side case carriers. (Please note any potential restrictions in the model-specific notes of the carrier) suitable for one helmet and more includes key and locking cylinder includes lock adapter to secure the case to the side case carrier waterproof thanks to special sealing cover is screwed on and can be painted in vehicle color if needed integrated bumper protects against minor bumps case shell made of impact-resistant, molded plastic cases can be keyed alike to existing cases or top cases.Please enter the key number in the comments field during the ordering process. Scope of delivery: right side case + left side case + 2x lock adapters optional inner bags available in the accessory program Recommended load: 10kg per side case (Please note the model-specific notes of the respective carrier, as well as the motorcycle manufacturer-specific information)

The special Journey Topcase 30 is delivered with a universal mounting plate and installation accessories. This allows for attachment to almost any third-party luggage rack with a flat mounting surface, for which we do not offer a model-specific top case rack. not compatible with Hepco&Becker tube luggage racks, Alurack luggage racks, or Easyrack luggage racks waterproof case shell made of impact-resistant plastic includes universal mounting plate and installation materials includes key and lock cylinder extensive range of accessories available suitable for one helmet Recommended load: 3-5kg in the top case (Please note the model-specific instructions for each rack, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag.

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with a compatible fuel cap.The principle of operation of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the sides of the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the product family of Royster side bags and the Royster rear bag No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Waterproof, integrated inner bag with roll closure Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessories: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with a compatible fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The ribs attached to the sides of the magnets mechanically secure the system. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Waterproof, integrated inner bag with roll closure Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessories: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with the appropriate fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Rubberized zipper Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessory: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with the appropriate fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by the magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Rubberized zipper Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessory: security lock Carrying handle Very low weight Recommended load capacity: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Special accessories for Hepco&Becker Gobi side cases. The construction of the GOBI side case, made of two honeycomb-connected shells, creates a 3.5-liter cavity between the inner and outer case shell. This can be made available with this faucet.

waterproof easy to attach for Daypack 2.0 and Royster tank bags also suitable for tablets sturdy yet flexible back panel - no flapping!