Valve Stem Seal Set JMP   Motorcycle-specific set consisting of intake and exhaust seals.     - High-quality materials:   Our valve stem seals are made from premium materials to ensure excellent sealing and long durability. This protects your engine from oil loss and ensures optimal performance.   - **Precision designs:** JMP valve stem seals are precisely manufactured to fit perfectly on the valve stems of various motorcycle brands and models. This ensures easy installation and reliable operation.     - **Longer engine life:** Protects the engine from wear and extends the lifespan of your motorcycle. - **Improved efficiency:** Reduces oil consumption and ensures consistent engine performance. - **Easy replacement:** Our valve stem seals are designed for easy installation and replacement.

Vehicle-Specific Information: for left sideEBC Prolite brake disc floating, Full Floater. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc layer, which wears off in the brake pad contact zone during the bedding-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Brake ring machined from forged HPSR steel with low carbon content. - Therefore, no warping of the brake disc even under maximum load. - No glazing of the braking surface, thus the coefficient of friction remains constant. - Braking surface drilled with an optimized hole pattern. - Galvanized for protection against corrosion. - Hub made of anodized aluminum. - Minimal manufacturing tolerances. - Independent design.Technical Data:Outer Diameter: 285 mmInner Diameter: 62.2 mmBolt Circle: 80 mmNumber of Holes: 4 Hole Diameter: 10.5 mmThickness: 4.7 mmOffset: 31.5 mmDesign: rigid Manufacturer: EBC

Vehicle-Specific Information: for right sideEBC Prolite Brake Disc, Full Floater   EBC replaces the rigid original disc with a Full Floater brake disc The manufacturing of the complex and expensive Full Floaters offers significant advantages when braking. The brake ring, sawed, drilled, and ground from forged HPSR steel bars, can expand freely even during repeated hard braking, for example, during mountain descents, without deforming. Here, the low carbon content of the used HPSR steel proves beneficial, as it ensures very little microstructural change in the steel under the thermal stress of heating and cooling the brake disc in tough road conditions. An EBC Full Floater brake disc is always a significant gain in safety.   - Brake ring machined from forged HPSR steel with low carbon content. - Therefore, no warping of the brake disc even under maximum load. - No glazing of the braking surface, thus the coefficient of friction remains constant. - Braking surface drilled with an optimized hole pattern. - Zinc-coated for protection against corrosion. - Hub made of anodized aluminum. - Minimal manufacturing tolerances. - EBC recommends EBC Double-H sintered brake pads for best braking performance. - Independent design.Technical Data:Outer Diameter:   285 mmInner Diameter:   62.2 mmBolt Circle:   80 mmNumber of Holes:   4 Hole Diameter:   10.5 mmThickness:   4.7 mmOffset:   31.5 mmDesign:   rigid Manufacturer:   EBC

Valve Stem Seal Set JMP   Motorcycle-specific set consisting of intake and exhaust seals.     - High-quality materials:   Our valve stem seals are made from premium materials to ensure excellent sealing and long durability. This protects your engine from oil loss and ensures optimal performance.   - **Precision designs:** JMP valve stem seals are precisely manufactured to fit perfectly on the valve stems of various motorcycle brands and models. This ensures easy installation and reliable operation.     - **Longer engine life:** Protects the engine from wear and extends the lifespan of your motorcycle. - **Improved efficiency:** Reduces oil consumption and ensures consistent engine performance. - **Easy replacement:** Our valve stem seals are designed for easy installation and replacement.

  Brembo brake discs EBC. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc coating, which wears off in the brake pad contact zone during the bedding-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Rigid brake disc. - Made from rolled HPSR steel with low carbon content. - Brake surface drilled with an optimized hole pattern. - Radially ground. - Galvanized for corrosion protection. - EBC recommends EBC Organic brake pads or for sporty riders EBC Double-H sintered brake pads. - Standalone design.      Technical Data:Outer Diameter:   285 mmInner Diameter:   51.2 mmBolt Circle:   68 mmNumber of Holes:   2    4 Hole Diameter:   4 mmThickness:   4.7 mmOffset:   15 mmDesign:   floating Manufacturer:   EBC

Vehicle Specific Information:  Cast wheel 3 spokes front right up to 10/89Quality ball bearings from NTN.Technical Data:Design:   Deep groove ball bearing Type:   63005 Inner Diameter:   25.00 mmOuter Diameter:   47.00 mmWidth:   16.00 mmSealing:   2 sealing discs Bearing Clearance:   Standard

Mahle Fuel FilterTechnical Data:Material:   Metal Connection Size:   8 mm Replaceable Insert:   No

Used part, normal signs of use, see additional pictures BMW part number: 7 661 623

BMW K75 K100 K1100 Clutch Cable Clutch Cable 32732324955 Original BMW spare part. Length: L=1510MM Fits according to BMW part number in the following vehicles: K1 K 100 RS K 1100 RS K 100 K75 K75 S K 75 C Price = including shipping within Germany!

Plastic Mirror   - reducingTechnical Data:Usage:   Vehicle-specific Mirror Type:   Stem Mirror Mounting:   M8 right Mirror Head Shape:   round Mirror Head Diameter:   120 mmMounting Side:   left    right Total Width:   280 mmColor:   black Material:   Plastic with Indicator:   No E-tested:   Yes

Vehicle-Specific Information: for left sideEBC Prolite brake disc floating, Full Floater. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc layer, which wears off in the brake pad contact zone during the bedding-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Brake ring machined from forged HPSR steel with low carbon content. - Therefore, no warping of the brake disc even under maximum load. - No glazing of the braking surface, thus the coefficient of friction remains constant. - Braking surface drilled with an optimized hole pattern. - Galvanized for protection against corrosion. - Hub made of anodized aluminum. - Minimal manufacturing tolerances. - Independent design.Technical Data:Outer Diameter: 285 mmInner Diameter: 62.2 mmBolt Circle: 80 mmNumber of Holes: 4 Hole Diameter: 10.5 mmThickness: 4.7 mmOffset: 31.5 mmDesign: floating Manufacturer: EBC

Vehicle-Specific Information: High HandlebarOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Product Description: original BMW workshop equipment Contents 50 ml 29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For professional users only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)

BMW Motorrad Protective Glass for 10-Inch TFT Display for example R18B K1600GT GTL from 2022 The protective glass for the 10-inch TFT display is hardened and non-reflective. It protects the display without impairing readability and is easy to install. High-quality, hardened glass, scratch-resistant and non-reflective. Reduces the formation of water spots on the display. Easy bubble-free application thanks to the installation kit and silicone coating on the underside. Secure protection of the TFT display against scratches and similar damage. Does not impair the readability of the display.

Artikelnummer: 76 61 5 A82 572Praktischer Schlüsselanhänger mit Make Life a Ride Schriftzug und großem, eingewebtem BMW Motorrad Schriftzug.ProdukthighlightsKleiner Make Life a Ride SchriftzugGroßer BMW Motorrad SchriftzugEckdatenMaterial: 100 % Baumwolle

BMW Original Repair Connector 3-Pole No. 611657 Item Description This offer includes 1 repair connector 3-pole. This offer applies to the red marked connector!!! ( Illustration No. 7 ) BMW Part Number: 83300413586 Fits various BMW motorcycles:

BMW Original Repair Connector 4-Pole No. 610615 Item Description This offer includes 1 repair connector 4-pole. This offer applies to the red marked connector!!! ( Illustration No. 5 ) BMW Part Number: 83300402340 Fits according to part number for the following vehicles: K50 (R 1200 GS)   (10/2011 — 10/2016) K51 (R 1200 GS Adventure)   (09/2012 — 10/2016) K52 (R 1200 RT)   (01/2013 — 10/2016) K53 (R 1200 R)   (11/2013 — 10/2016) K54 (R 1200 RS)   (06/2014 — 10/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 08/2016) K23 (R nineT Scrambler)   (09/2015 — 10/2016) K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010) K42 (HP4)   (09/2011 — 07/2014) K46 (S 1000 RR)   (09/2008 — 10/2016) K47 (S 1000 R)   (02/2013 — 07/2016) K49 (S 1000 XR)   (05/2014 — 09/2016) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 10/2016) K70 (F 700 GS)   (06/2011 — 10/2016) K71 (F 800 S, F 800 ST, F800GT)   (12/2004 — 09/2016) K72 (F 650 GS, F 800 GS)   (10/2006 — 10/2016) K75 (F 800 GS Adventure)   (05/2012 — 10/2016) K73 (F 800 R)   (12/2005 — 09/2016) R13 (F 650 GS, GS Dakar)   (02/1999 — 10/2007) K14 (F 650 CS)   (11/2000 — 07/2005) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 10/2016) K19 (C 650 GT)   (01/2011 — 10/2016) R13 (G 650 GS)   (02/2008 — 10/2015) R13 (G 650 GS Sertão)   (07/2010 — 11/2014) 259 (R 850 GS, R 1100 GS)   (04/1993 — 07/2006) R21 (R 1150 GS)   (09/1998 — 11/2003) R21 (R 1150 GS Adventure)   (07/2001 — 09/2005) 259R (R 850 R, R 1100 R)   (09/1993 — 11/2002) 259 (R 850 RT, R 1100 RT)   (05/1994 — 11/2001) R28 (R 850 R, R 1150 R, Rockster)   (11/1999 — 07/2007) R22 (R 850 RT, R 1150 RT, R 1150 RS)   (01/2000 — 03/2006) 259C (R 850 C, R 1200 C)   (04/1996 — 07/2004) 259 (R 1100 S, R 1100 RS)   (01/1992 — 07/2005) 259C (R 1200 C Montauk)   (10/2002 — 10/2004) 259C (R 1200 C Independent)   (05/2000 — 08/2004) K30 (R1200 CL)   (10/2001 — 07/2004) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K 1200 RS, K 1200 LT)   (04/1996 — 07/2008) K41 (K 1200 GT, K 1200 RS)   (03/2000 — 07/2005) C1   (10/1999 — 04/2003)

Seal Ring   Material: AluminumThickness [mm]: 1.5Outer Diameter [mm]: 22.0Inner Diameter [mm]: 18.0Technical Data:Range:   No Inner Diameter:   18 mmOuter Diameter:   22 mmHeight:   1.5 mmMaterial:   Aluminum Design:   Flat Gas Resistant:   Yes Oil Resistant:   Yes

VEMO Oil Pressure Switch   ·         With sealing ring   Technical Data: Thread size M12x1.5 Switching pressure: 0.3 bar

JMP Hose Clamp   - Diameter: 13.1 to 15.3 mm- Stainless Steel 1.4307Technical Data:Type:   1 Ear Clamps Min. Clamping Range:   13.1 mmMax. Clamping Range:   15.3 mmMaterial:   Stainless Steel Color:   silver

  Bolt   Original spare partTechnical Data:Type:   Oil drain bolts    Closure bolts Thread:   M14 x 1.5 Diameter:   14 mmHead:   Flat head Drive:   Internal hexagon Surface:   No finishing Material:   Stainless steel Color:   silver Seal ring/Washers:   None Manufacturer:   Other For safety wire:   No

Original BMW Spare Part Part Number: 21217702595 According to the part number, it fits the following vehicles:

Original BMW Spare Parts BMW Part Number: 33177685599 , 33177685052 Fits the following vehicles: