The rear splash guard in carbon for the BMW R NineT Serie is a direct replacement for the original component and used as the numberplate holder. it contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The rear undertray in carbon without number plate holder for the BMW R NineT Serie is a direct replacement for the original component .Our rear splash guard can used as the number plate holder.it contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

Regulator / Rectifier 2704

Vehicle-Specific Information:  Government VehiclesRegulator/Rectifier   For all BMW 2V Boxer models from 1969 (government version, black). 0.5 volts higher charging voltage.  

Offered here is a used part Vehicle: R45 Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown Part number: 12321244409

HELLA Working Current Relay 5-pole, 12 V With 2 outputs Power Mini Relay With parallel resistor to the coil Closes the circuit between the power source and an electrical consumer Ideal for switching paired consumers Application area: main headlights, auxiliary headlights, horns, heaters, fan motors, power windows, climate and ignition systems, etc. Technical Data Connector design ID: B2 Wiring diagram: S6 Temperature range, max: 80 °C Load capacity (at +80 °C) closing contact Ohmic load: 40 A Inductive load: 30 A Capacitive load: 30 ATechnical Data:Voltage: 12 VNumber of Poles: 5 Switch Function: Normally Open Load Capacity: 40 AWith Holder: No

This is a new part offered Vehicle: K30 R1200CL Manufacturer: BMW Condition: New with storage marks Description: sold as shown Part number: 34217680374

Upper Replacement Triple Clamp gpRacing for Sport Motorcycles CNC-machined from a solid aluminum block, high-strength triple clamp Unique, sporty design High-quality surface finish and racing look Directly replaceable 1:1 with the original triple clamp Finest surface finishing with BLACKPearl anodizing

Return Spring for Clutch Actuation Arm

Footpeg Adapter for Rider BMW R nineT and Pure - Lowering 25 mmincluding ABE Does not fit on model year 2015 R1ST ABE e1*2002/24*0230*11 and Racer 1N12 e1*168/2013*00009For all riders who wish for a lowering of the footpegs of the BMW R nineT, the third version is now ready, which fits all BMW R nineT models. This way, both sides are visually identical and lower the peg by 25 mm lower.The side stand is 20 mm lower than the original. The lean angle of 45° is still achievable.Delivery as a set with 2 pieces - now with brake lever relocationAll items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Footpeg Adapter for BMW R nineT Scrambler and Urban, Lowering 25 mmincluding ABE Does not fit on model R1ST from year 2015 ABE e1*2002/24*0230*11 For all riders who wish for a lowering of the footpegs of the BMW R nineT Scrambler and Urban, the third version is now ready, which fits all BMW R nineT models. This way, both sides are visually identical and lower the peg by 25 mm lower.For the R nineT Pure and Urban models, the brake pressure line is extended and must be bled, as it is too short; the extension is included in the set.The side stand is 20 mm lower than the original. The lean angle of 45° is still achievable.Delivery as a set with 2 pieces - now with brake lever relocationAll items have been mounted and tested on original motorcycles - without aftermarket modifications.

Vehicle-Specific Information: Flat HandlebarStainless Steel Mirror   - reducing   Mirrors for vehicles registered before July 1, 2000 do not require an E-mark. A mirror surface area of 60cm² is sufficient.Technical Data:Usage: Vehicle-specific Mirror Type: Stem Mirror Mounting: M8 right Mirror Head Shape: round Mounting Side: right Total Width: 230 mmColor: black Material: metal with Indicator: No E-tested: No

Vehicle-Specific Information: Flat HandlebarStainless Steel Mirror   - reducing   Mirrors for vehicles registered before July 1, 2000 do not require an E-mark. A mirror surface area of 60cm² is sufficient.Technical Data:Usage: Vehicle-specific Mirror Type: Stem Mirror Mounting: M8 right Mirror Head Shape: round Mirror Head Diameter: 110 mmMounting Side: right Total Width: 230 mmColor: chrome Material: Steel with Indicator: No E-tested: No

Stainless Steel Mirror   - reducing   Mirrors for vehicles registered before July 1, 2000 do not require an E-mark. A mirror surface area of 60cm² is sufficient.Technical Data:Usage:   Vehicle-specific Mirror Type:   Stem Mirror Mounting:   M8 right Mirror Head Shape:   round Mirror Head Diameter:   110 mmMounting Side:   right Total Width:   260 mmColor:   chrome Material:   Steel with Indicator:   No E-tested:   No

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

Lock nut including wave washer   Stainless steel   Dimensions: - Outer: 19.5mm - Inner: 4mm - Height: 14mm  

Rocker Cover (Left) Carbon - BMW R NineT   This carbon rocker covers are very strong. but have a total of less than 500 gramms each. They not only give the air/oil cooled BMW boxer. the absolute hightech look. they do the best job in protecting your bike!   This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Rocker Cover (Right) Carbon - BMW R NineT  This carbon rocker covers are very strong. but have a total of less than 500 gramms each. They not only give the air/oil cooled BMW boxer. the absolute hightech look. they do the best job in protecting your bike! This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rocker cover leftside for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 173g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.   The rocker cover fits all NineT models up to and including model year 2020.   Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

MADE IN GERMANYLieferumfang: rechts + links inkl. Anbaumaterial und Anleitungfür viele Hepco&Becker LedertaschenMontage der Taschen entweder via Schnellverschluss, oder durch Festmontagebei einer Festmontage sind die Ledertaschen dann fest am Träger verschraubt, ein Festmontagekit liegt der Ledertasche automatisch mit beibei der Schnellverschluss Lösung müssen die Ledertaschen modellspezifisch angepasst werden, da jeder modellspezifische Lederpacktaschenhalter anders geformt istWir empfehlen eine sach- und fachgerechte Montage durch unsere Sattler bei uns im WerkSchnellverschluss Werksmontage Artikelnummer: 700402Schnellverschluss Selbstmontage Artikelnummer: 700403Empfohlene Zuladung: 5-7kg je Koffer (Bitte beachten Sie die modellspezifischen Hinweise beim jeweiligen Träger, sowie die motorradherstellerspezifischen Angaben.)Sollten Sie sich hier einen neuen Träger für ein anderes Motorrad kaufen wollen und Sie haben noch alte Ledertaschen mit einem Verschlusssystem vom alten Träger, so werden diese Taschen höchstwahrscheinlich nicht an den neuen Träger passen, denn jeder Träger ist individuell, modellspezifisch geformt.Aber auch hier können wir Abhilfe verschaffen. Senden Sie uns die Ledertaschen vor Bestellung mit einem Begleitschreiben ein. Ihnen wird dann ein Angebot erstellt. Wir können dann die Rückwände der Hepco&Becker Ledertaschen tauschen und neue einsetzen; modellspezifischer Schnellverschluss inkl. Hinweis:Ledertaschen in der C-Bow Version passen nichtHepco&Becker Seitenkoffer oder Aluminiumkoffer passen nicht

Die Rohrgepäckbrücken von Hepco&Becker sind modellspezifisch gefertigt und passen nur an das aufgeführte Motorrad auf der Anbauanleitung. Dank der Konstruktion aus deutschem Qualitätsstahl, gewährleisten Hepco&Becker Gepäckbrücken maximale Festigkeit und eine sehr hohe Sicherheit. Durch die hochwertige Beschichtung und bei ordentlicher Pflege, bleibt der Look auch langfristig erhalten. Bei Bedarf kann auch ohne Probleme Softgepäck verzurrt werden, die Rohrgepäckbrücke bietet dazu viele Möglichkeiten. Sollte der Platz nicht ausreichen, kann die Brücke mit der Hepco&Becker Universalgepäckbrückenverbreiterung kombiniert werden. Empfohlene Zuladung: 5kg (Bitte beachten Sie die modellspezifischen Hinweise, sowie die motorradherstellerspezifischen Angaben Meist problemlos mit Seitenkofferträgern oder C-Bow Haltern kombinierbar (Anbauanleitungen und modellspezifischen Hinweise beachten) Gepäckträger benötigen generell keine ABE oder Eintragung Lieferumfang: Gepäckbrücke + Anbaumaterial + Anleitung Made in Germany Nicht topcasetauglich, nur für Softgepäck geeignet!

Vehicle-Specific Information: Flat HandlebarStainless Steel Mirror   - reducing   Mirrors for vehicles registered before July 1, 2000 do not require an E-mark. A mirror surface area of 60cm² is sufficient.Technical Data:Usage: Vehicle-specific Mirror Type: Stem Mirror Mounting: M8 right Mirror Head Shape: Round Mirror Head Diameter: 110 mmMounting Side: Right Total Width: 320 mmColor: Black Material: Steel With Indicator: No E-tested: No