Stubby Handlebar Kit multiClip TOUR Ready-to-install kit suitable for the selected vehicle model. The illustration shows the exemplary scope of delivery of a multiClip kit. This varies depending on the motorcycle model. With the stubby: significantly higher seating comfort without having to install a superbike kit with tubular handlebars directly. The stubby can also be adjusted lower again if needed. Please order separately: Handlebar ends With parts certificate. In Germany, the kit must be approved and registered at a testing facility after installation. The KIT consists of: multiClip Tour Ø43 mm Upper fork bridge gpRacing black Small parts- up to approx. 5.5 cm higher / up to approx. 8 cm wider

The BMW R nineT Crown for R nineT, Scrambler, Urban, Pure, and Racer - Ø 46 mmCrown your R nineT!In just 3 minutes of installation time with a clamp, you can complete your retro.This not only improves the appearance, but the engine also receives better cooling.The exhaust crown in cylindrical shape was not cast, but meticulously turned and milled from solid aluminum.The price is for a pair.Design patent 40 2019 000 798.5 protected.All items were mounted and tested on original motorcycles - without any modifications.

Extended Reverse Lever BMW R18 An elegant and interesting looking solution for the reverse lever on the BMW R18, which is mounted quite low and hidden. We have solved this problem and created a sensible and visually reminiscent solution to the 1940s. Many motorcycles in the 40s came with a reverse gear as standard. The adapter is slipped over the original lever and secured with 2 M6 threaded pins underneath. We offer the lever in polished and black anodized finishes and for two models. Once for models with 60mm and 100mm. Please measure the length of your original reverse lever and then select the corresponding length. You can also choose the composition of the lever, ball holder, and ball individually. Please write to us about this as a note with your order.

This is a used part being offered Vehicle: BMW R18 Manufacturer: MV Verholen Condition: normal signs of use Description: sold as shown, scratchesPart number: 10392 An elegant and interesting looking solution for the reverse lever on the BMW R18, which is mounted quite low and hidden. We have solved this problem and created a sensible solution that visually recalls the 1940s. Many motorcycles in the 40s came with a reverse gear as standard. The adapter is slipped over the original lever and secured with 2 M6 threaded pins underneath.

Puig Windscreen NAKED A windscreen in the naked bike look. Made from durable polycarbonate. It offers good protection against wind and weather and improves aerodynamics. Installation instructions and required mounts are included.Technical Data:Height:   345 mmWidth:   320 mmColor:   light smoke gray Manufacturer:   Puig

Navigation Mount for BMW Navigation Devices with 25mm Ball With our mount, you have the option to attach a ball to your navigation device and position it on the handlebar. The power supply is achieved through a Y-connector at the input of the onboard socket. The onboard socket is not used from the outside. After switching off, the navigation device remains on for about 4 minutes. Our system prevents the battery from being deeply discharged. The cable is included in the price and is connected to the onboard socket. However, it is only suitable for the use of navigation devices or mobile phones, not for additional lights. The latest MV device holder for your BMW navigation device The mount replaces an M8 handlebar mounting screw. The ball is made of polished aluminum and has a diameter of 25.4 mm. All balls are equipped with a rubber ring, making them non-slip and vibration-dampened.   The RamMount holder (Item No. 1008-109011) must be ordered separately.

Needle jet for Bing constant vacuum carburetor type 64-3. Total length 16.5 mm; largest diameter 7.5 mm; for atomizer air system - Replacement part for Bing carburetors: 64/26/301 - 304 64/28/301 - 304 64/32/301 - 304 64/32/313 - 314 64/32/321 - 324 64/32/351 - 352 64/32/357 - 362 64/32/3030 64/32/3040 64/32/377

Needle jet for Bing constant vacuum carburetor type 64-3. Total length 16.5 mm; largest diameter 7.5 mm; for atomizer air system - Replacement part for Bing carburetors: 64/26/315 - 318 64/32/305 - 306 64/32/335 - 348

Needle Sleeve

NGK Spark Plug   NGK is the world's leading manufacturer of spark plugs.   State-of-the-art production facilities, significant investments in research and development, as well as strong commitment to motorsport, from Formula 1 to motorcycle racing, make the NGK spark plug so successful.

NGK Spark Plug   Package = Contents 2 pieces   NGK is the world's leading manufacturer of spark plugs.   State-of-the-art production facilities, significant investments in research and development, as well as strong commitment to motorsport, from Formula 1 to motorcycle racing, make the NGK spark plug so successful.

NGK Spark Plug   The secret of the new Iridium IX spark plug lies in the laser-welded electrode made of iridium. With its "minimal" diameter of just 0.6 mm, it concentrates the ignition voltage.     Advantages:   The optimal ignition properties of the Iridium IX spark plugs prevent fouling during stop-and-go traffic.   Misfires or ignition dropouts are prevented. This reduces emissions and protects (if present) the catalytic converter and the environment.   The Iridium IX spark plugs ensure a "smooth" engine operation, enhance the riding experience through better acceleration, and thus provide more driving pleasure.   The Iridium IX spark plug lasts at least twice as long as any standard spark plug. Frequent spark plug changes are therefore "out." This, in turn, reduces costs.   Highest ignition reliability, even combustion, optimal engine performance, and spontaneous throttle response are the result of state-of-the-art technology and reduce fuel consumption.   The optimized electrode shape reduces the ignition voltage requirement, protects the engine, and ensures a "smooth" operation.

NGK Spark Plug Connector   The use of NGK spark plug connectors with suppression resistors provides optimal suppression of interference frequencies across all frequency ranges when used in conjunction with NGK spark plugs, without negatively affecting the engine's performance.   NGK spark plug connectors are equipped with a resistance element made of high-quality ceramic material. This ensures a constant resistance value with only slight deviation under overload conditions.          Technical Data:Type:   Connector Spark Thread Diameter:   14 mmConnection Type:   M4 connection thread Angle:   90° Resistance:   5 kiloohmsSuppressed:   Yes Material:   Phenolic resin Color:   black Cable Length:   without cable Integrated Ignition Coil:   No

NIGHT BREAKER H4-LED With the NIGHT BREAKER H4 LED for motorcycles, OSRAM's first road-legal LED retrofit lamp for motorcycles is now available. With the road-legal NIGHT BREAKER H4-LED, you can now upgrade the low and high beam function of your motorcycle to the latest LED technology. These LED replacement lamps are suitable as a replacement for conventional H4 lamps and sockets. They provide a modern and bright white light with a color temperature of up to 6000 Kelvin and impress with up to 230% more brightness2), while the glare to other road users is below the permissible maximum values by up to 50%. Compared to conventional light sources, such as halogen lamps, these LED retrofit lamps consume up to 55% less energy and impress with a lifespan up to 5 times longer, thanks to LED technology and a specially designed vibration-resistant design. Replace your motorcycle lamps now with OSRAM's revolutionary LED retrofit lamps and experience pioneering brightness with road approval. Additionally, OSRAM offers a dedicated warranty on all NIGHT BREAKER LED retrofit lamps. Technical Data:Voltage: 12v Type: LED Socket: H4 (P43t) Power: 23 27 WattsColor: white Light Type: COOL WHITE Filament Technology: LED Technology Longlife: No Reinforced Version (Heavy Duty): No Manufacturer: Osram Halogen: No Length: 87.4 mmDiameter: 18.5 mmColor Temperature: 6000 KLuminous Flux: 1000 1650 lmTest Standard: ABG Blister Packaging: No

  Nocke Gasgriff

The number plat holder in carbonfiber for BMW R NineT is a direct replacement for the original component.No ABE and TÜVThis front fender contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

Stainless Steel Nut

Vehicle-Specific Information:  Attention: Only suitable for fuel tap type "Germa"  O-Ring   Original spare part    Technical Data:Range:   No Inner Diameter:   12 mmOuter Diameter:   16 mmHeight:   2 mmMaterial:   Rubber Design:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

  O-RingTechnical Data:Range:   No Inner Diameter:   19 mmOuter Diameter:   27 mmHeight:   4 mmMaterial:   Rubber Design:   round

O-Ring Athena   Athena, an international company founded in 1973, develops and manufactures seals, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement seals available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of seals with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

O-Ring Oil Filler Cap 25X2.7MMTechnical Data:Inner Diameter:   25.00 mmOuter Diameter:   30.00 mmThickness:   2.50 mmScrew Fastening:   none

O-ring for fuel tap Original spare part

O-Ring Venturi Mixing Tube 8X2MM Technical Data:Range: No Inner Diameter: 8 mmOuter Diameter: 12 mmHeight: 2 mmMaterial: Rubber Design: Round Fuel Resistant: Yes Oil Resistant: Yes

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes