BATTLAX-BT-46TOURING MOTORCYCLE TIRE   Further development of a legend with modern technology Improvements in all areas - even on wet roads Even wear  Technical Data:Width:   110 Aspect Ratio:   90 % of widthConstruction:   - (Bias tire) Rim Diameter:   18 inchesLoad Index:   61 Speed Index:   H -210 km/h Profile:   BT46 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

Machined aluminum body, adjustable spring preload and rebound (30 clicks). The locking of the spring preload is done via a set screw.   The adjustment tool is included in the delivery.  

Machined aluminum body, shock absorber adjustable in preload. The locking of the preload is done via a set screw.   The adjustment tool is included in the delivery.  

Machined aluminum body, shock absorber adjustable in spring preload. The locking of the spring preload is done using a set screw.   The adjustment tool is included in the delivery.            

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

Oil pressure damper with steel housing, spring preload adjustable in 5 detent points.  Adjustment tool included in the delivery.  

Adjustment Screw Carburetor

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

All Balls Racing tapered roller bearing set for steering head / wheel bearing set   Note: Steering head bearing set only for GasGas, wheel bearing set only for BMW!   - includes all bearings and seals required for installation - high-quality OE replacement for ball bearings or direct replacement for tapered bearings - specially designed sealing lips that protect against dirt and water, while keeping the bearing grease clean  

Seal kit with dust caps from All Balls Racing - better breakaway torque and up to 3x lower friction than OE seals- Patented Max-Life manufacturing, which increases lifespan by 3-4 times- Seals are triple sealed- Dust caps are coated with a special grease to improve responsiveness

Seal Ring

Elring Aluminum Seal Ring DIN/ISO: 7603 Shape: A-Form Material: Aluminum Thickness/Strength [mm]: 1.5 mm Outer Diameter [mm]: 22 mm Inner Diameter [mm]: 18 mm Packaging unit 100 (Price per piece packaging unit = Minimum order quantity) used among others for oil drain plugs in vehicles: BMW (G30, F90, G11, G12, G05, G15, G06) BMW MOTORCYCLES Technical Data:Range: No Inner Diameter: 18 mmOuter Diameter: 22 mmHeight: 1.5 mmMaterial: Aluminum Design: A-Form Gasoline Resistant: Yes Oil Resistant: Yes

Fahrzeugspezifische Information:  Plattenfilter   Ansaugstutzen   Originalersatzteil

Fahrzeugspezifische Information:  Plattenfilter   Ansaugstutzen   Originalersatzteil

Oil Pump Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Atomizer for Bing constant pressure carburetor type 64-3. Total length 11 mm; largest diameter 9.6 mm - Replacement part for Bing carburetors: 64/32/301-306 64/32/311-314 64/32/321-324 64/32/335-336 64/32/347-354 64/32/357-362 64/32/3030 64/32/3040 64/32/375+377+379+381+383+385

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 7 686 746 is used on the following vehicles:    

Original BMW Spare Part / Accessory Diameter 41 mm

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Battery Rubber Holder

Battery Strap Total Length: 200 mm

Membrane for Bing constant pressure carburetor type 64-3. Outer diameter 80 mm, inner diameter 40.5 mm, height 17 mm