The rear hugger for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 460g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger designed for the offroad tires fits the BMW R nineT Urban GS / Scrambler and is attached to the vehicle&rsquos bevel drive housing using the original screws. Attaching it is so easy and ingenious it&rsquos been acknowledged and protected by the German patent office. We selected the length of the rear hugger to not only help keep the motorcycle clean. but the strut will also appreciate the protection from stone chips. dirt and &ldquosandblasting&rdquo. Installing an effective rear hugger will especially improve the life of the strut&rsquos seals and piston rod. The rear mudguard reduces considerably the amount of dirt and spray thrown up by the rear wheel and provides much needed protection to the shock absorber and the underseat area. Referring to the different models and types of motorcycles. the rear hugger incorporates different stock suspension and tire sizes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear splash guard in carbon for the BMW R NineT Serie is a direct replacement for the original component and used as the numberplate holder. it contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The rear undertray in carbon without number plate holder for the BMW R NineT Serie is a direct replacement for the original component .Our rear splash guard can used as the number plate holder.it contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

Footpeg Adapter for BMW R nineT Scrambler and Urban, Lowering 25 mmincluding ABE Does not fit on model R1ST from year 2015 ABE e1*2002/24*0230*11 For all riders who wish for a lowering of the footpegs of the BMW R nineT Scrambler and Urban, the third version is now ready, which fits all BMW R nineT models. This way, both sides are visually identical and lower the peg by 25 mm lower.For the R nineT Pure and Urban models, the brake pressure line is extended and must be bled, as it is too short; the extension is included in the set.The side stand is 20 mm lower than the original. The lean angle of 45° is still achievable.Delivery as a set with 2 pieces - now with brake lever relocationAll items have been mounted and tested on original motorcycles - without aftermarket modifications.

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

Rocker Cover (Left) Carbon - BMW R NineT   This carbon rocker covers are very strong. but have a total of less than 500 gramms each. They not only give the air/oil cooled BMW boxer. the absolute hightech look. they do the best job in protecting your bike!   This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Rocker Cover (Right) Carbon - BMW R NineT  This carbon rocker covers are very strong. but have a total of less than 500 gramms each. They not only give the air/oil cooled BMW boxer. the absolute hightech look. they do the best job in protecting your bike! This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rocker cover leftside for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 173g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.   The rocker cover fits all NineT models up to and including model year 2020.   Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Protection against theft of the closure cap. Protection against unauthorized access and contamination of the oil. BMW Boxer lettering. Includes special angle wrench and O-ring. Additional Information

The silencer protector (2 parts) for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only about 40g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For these thermically stressed parts we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the parts.   Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

wasserdichte Smartphonetasche speziell für den Hepco&Becker Tankrucksack "Street Daypack" und "Royster" Smartphone lässt sich durch Hülle bedienen wird mittels kleiner Klettverschlüssel am Tankrucksack an 3 Punkten befestigt kann im Handumdrehen entfernt werden

The BMW R nineT Crown for R nineT, Scrambler, Urban, Pure, and Racer - Ø 46 mmCrown your R nineT!In just 3 minutes of installation time with a clamp, you can complete your retro.This not only improves the appearance, but the engine also receives better cooling.The droplet-shaped exhaust crown is not cast, but meticulously turned and milled from solid aluminum.The price is for a pair.Design patent 40 2019 000 798.5 protected.All items have been mounted and tested on original motorcycles - without any modifications.

The sump guard/bellypan for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 470g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Fabric rear bag for strap attachment on various rear racks. Not waterproof. Practical and well thought out: securely attached to the passenger seat, the weight distribution is not negatively affected, and the bike remains neutral and agile. With a zipper and compression straps, it offers a variable volume of up to 25 liters. The design made of coated Cordura fabric is water-repellent and durable. With a carrying handle and straps, it can also be used as a backpack or shoulder bag.Small Sport StarCapacity 15-25 litersDimensions W x H x D: 26 x 33 x 20/33 cm

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

This tank cover in carbon for the left side of the Petrol Tank of the BMW R 90 T / Scrambler matches not only with the black original tank. it looks also perfect with the Grey or the BMW Optional Alu Tank. We recommend to use the tank cover together with the injector cover in carbon. It looks fantastic on the bike!

This tank cover in carbon for the right side of the Petrol Tank of the BMW R 90 T / Scrambler matches not only with the black original tank. it looks also perfect with the Grey or the BMW Optional Alu Tank. We recommend to use the tank cover together with the carbon air channel cover in carbon. It looks fantastic on the bike!

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

This revolutionary new device effortlessly installs mushroom-shaped rubber plugs in all tubeless tires while the tire can remain on the rim. With the help of the "Tire Repair Kit" and the included hex key, the plug is twisted into the hole. The plug expands under pressure, filling the punctured area. A strong pull on the shaft of the plug with pliers ensures a secure fit of the mushroom head against the inner wall of the tire, preventing any air from escaping. This technology guarantees maximum reliability and reduces your repair times in any situation.Only suitable for tubeless tires!Scope of delivery:- "Tire Plugger"- Adapter- Needle (with handle)- Rasp (with handle)- Hex key- 15 x plugs- Blade (foldable)- Bag- Fabric zipper bag (16 x 10 x 5 cm)Caution: Emergency repair kit!

This handy, compact basic first aid kit is ideal for short trips, cycling tours, and other sporting activities. Practical, small, lightweight.This kit contains everything that is important and required according to DIN 13167 for motorcyclists. Adhesive bandages, instant wound dressings, bandage packages, emergency blanket, sterile dressing, scissors, vinyl gloves, and a first aid manual are included.This first aid kit should be an essential part of your equipment. The bag is made of water-repellent nylon fabric with a large zipper. The First Aid Kit DIN 13167 is specifically designed for motorcycle use and contains the following:- 1 roll of adhesive bandage- 8 packs of instant wound dressings- 2 bandage packages- 1 emergency blanket- 1 sterile dressing- 1 pair of scissors- 4 bags of vinyl gloves- 1 first aid brochure- 1 contents listIn Austria, carrying a DIN 13167 first aid kit on a motorcycle is mandatory!Dimensions and Weight:- Dimensions: 15 x 10 x 5 cm- Weight: 240 g