Special accessories for Hepco&Becker Gobi side cases. The construction of the GOBI side case, made of two honeycomb-connected shells, creates a 3.5-liter cavity between the inner and outer case shell. This can be made available with this faucet.

waterproof easy to attach for Daypack 2.0 and Royster tank bags also suitable for tablets sturdy yet flexible back panel - no flapping!

Original BMW Spare Part Cylinder Head Cover Granite Grey Left New and originally packaged BMW Part Number: 11127723427 Fits the following vehicles according to the part number:

Stubby Handlebar Kit multiClip TOUR Ready-to-install kit suitable for the selected vehicle model. The illustration shows the exemplary scope of delivery of a multiClip kit. This varies depending on the motorcycle model. With the stubby: significantly higher seating comfort without having to install a superbike kit with tubular handlebars directly. The stubby can also be adjusted lower again if needed. Please order separately: Handlebar ends With parts certificate. In Germany, the kit must be approved and registered at a testing facility after installation. The KIT consists of: multiClip Tour Ø43 mm Upper fork bridge gpRacing black Small parts- up to approx. 5.5 cm higher / up to approx. 8 cm wider

The BMW R nineT Crown for R nineT, Scrambler, Urban, Pure, and Racer - Ø 46 mmCrown your R nineT!In just 3 minutes of installation time with a clamp, you can complete your retro.This not only improves the appearance, but the engine also receives better cooling.The exhaust crown in cylindrical shape was not cast, but meticulously turned and milled from solid aluminum.The price is for a pair.Design patent 40 2019 000 798.5 protected.All items were mounted and tested on original motorcycles - without any modifications.

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

Mahle Oil Filter   As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology.   Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine.   Advantages of Mahle oil filters:   - Cold start resistance ensured by a stable pleat geometry - Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts - Load peaks of up to 20 Bar are compensated by the high pressure resistance of the housing - Oil supply is always ensured by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a filter element that is heavily contaminated due to exceeding the change interval) - The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply upon engine start Fits the following vehicles: i3 I01 LCI   (01/2017 — 12/2019) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 12/2019) K22 (R nineT Pure)   (12/2015 — 12/2019) K23 (R nineT Scrambler)   (09/2015 — 12/2019) K32 (R nineT Racer)   (12/2015 — 07/2019) K33 (R nineT Urban G/S)   (03/2016 — 12/2019) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 12/2019) K61 (K 1600 Bagger)   (01/2017 — 12/2019) K83 (F 900 R)   (11/2018 — 12/2019) K84 (F 900 XR)   (11/2018 — 12/2019) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 12/2019) K19 (C 650 GT)   (01/2011 — 12/2019) K08 (C 400 GT)   (04/2018 — 12/2019) K09 (C 400 X)   (03/2018 — 12/2019)

The aluminum hump cover is mounted in place of the passenger seat and adds a touch of elegance in a classic look. The high-quality backrest ensures more riding comfort and perfectly complements the successful retro design. The twist: Behind the backrest is a small, splash-proof storage compartment. High-quality hump cover made of aluminum. Available in aluminum or hand-brushed aluminum. Backrest in black, available in smooth synthetic leather or Alcantara look. Small storage compartment, splash-proof, not lockable. Installation in place of the passenger seat.

Elegantly designed holder made of forged aluminum Mounting of the end silencer to the main frame with the passenger frame removed Suitable for stock silencers as well as Akrapovič sports silencers in low position (short connecting pipe) Recommended: Combination with cover for main frame bolt Not compatible with Akrapovič sports silencers in high position (long connecting pipe) For solo operation only

The cover for the main frame bolt is the elegant solution when the passenger frame is removed. For this purpose, the open bolt of the main frame is concealed with an aluminum double sleeve. Visually elegant solution. Aluminum double sleeve. Scope of delivery: 1 piece

Backrest with high-quality surface Smooth artificial leather Additional Information

The black cylinder head covers showcase the boxer engine attractively and give the motorcycle a unique appearance. The shape corresponds to the stock covers in granite gray. Visual enhancement and refinement. Shape identical to stock covers.

The black cylinder head covers showcase the boxer engine attractively and give the motorcycle a unique appearance. The shape corresponds to the stock covers in granite gray. Visual enhancement and refinement. Shape identical to stock covers.

Zuverlässiger Wetterschutz: Die Fahrzeugabdeckhaube für den Außenbereich schützt das Motorrad auch unter freiem Himmel vor Nässe, Schmutz und anderen Umwelteinflüssen. Das hochwertige Nylon-Cover ist wasserdicht und verfügt über Belüftungsöffnungen sowie ein großes Sichtfenster im Bereich des Kennzeichens. Kordelzüge gewährleisten eine optimale Fixierung der Haube am Motorrad, die beiden Metallösen im Frontbereich lassen sich zur Diebstahlsicherung nutzen. Praktisch ist zudem die integrierte Tasche, in der das Cover bei Nichtgebrauch aufbewahrt werden kann. Die schwarze Abdeckhaube ist mit einem großen silberfarbenen BMW Motorrad Schriftzug versehen und für viele BMW Motorräder geeignet.   Zuverlässiger Wetterschutz. Praktische Handhabung.

The perfect addition for off-road adventures: The headlight guard protects against damage from stone chips or branches when venturing off public roads. The guard, made of black powder-coated steel, is designed exclusively for off-road use. Robust protection made of steel sheet. For off-road use only.

Der Heckabschluss für die Einzelsitzbank Scrambler rundet die Optik der Maschine mit verkürzter Sitzbank für den Solobetrieb stilsicher ab. Der schwarze Heckabschluss ist aus Kunststoff gefertigt und fügt sich perfekt an die Einzelsitzbank Scrambler an. Passender Heckabschluss für die Einzelsitzbank Scrambler. Schwarz, aus Kunststoff gefertigt. Nur für den Solobetrieb.

Die hochwertige HP Carbon Abdeckung für das Zündlenkschloss setzt einen edlen Akzent mit echter Hightech-Anmutung. Das exklusive CFK-Bauteil ist mit einer UV-beständigen Hochglanzlackierung versehen und ersetzt das schwarze Serienteil. Individualisierung im Detail. Edle Hightech-Optik. CFK mit UV-beständiger Hochglanzlackierung.

The high-quality HP Carbon front wheel cover combines elegant design with the perfection of a lightweight high-tech material. The exclusive CFRP component is sealed with a UV-resistant high-gloss coating, adding an individual sporty accent. High-quality carbon component. UV-resistant high-gloss coating. Elegant design with individual high-tech appeal. Replaces the standard part made of black plastic. Can be combined with other HP Carbon accessories.

The high-quality HP carbon cover for the throttle body combines elegant aesthetics with the perfection of a lightweight high-tech material. The exclusive CFRP component is sealed with a UV-resistant high-gloss coating and adds an individual sporty accent. Noble high-tech appearance. CFRP with UV-resistant high-gloss coating.

The HP passenger footpegs are machined from an anodized aluminum alloy, giving the bike an even sportier appearance. Due to their design, they are very lightweight yet extremely shape-stable, providing secure support for the foot at all times. They match the design of the HP footpegs for the rider perfectly and leave no wishes unfulfilled in terms of aesthetics and comfort for the passenger. High-quality footpegs in lightweight construction. Machined from corrosion-resistant aluminum. Anodized.

The cover for the ignition lock is made of granite gray painted plastic, adding a colorful accent. This visually appealing alternative replaces the black stock part. Visual accent in granite gray. Replaces black stock cover.

Wasserdichte, herausnehmbare Innentasche mit Rollverschluss. wasserdicht herausnehmbar mit Rollverschluss.

The waterproof side bag in a retro look looks extremely casual and offers plenty of storage space for luggage with a capacity of nine liters. Under the water-repellent outer fabric made of black canvas, everything stays nice and dry in a waterproof, removable inner bag with a roll closure. Thanks to the innovative quick-release fastening, the bag can be easily attached to the motorcycle with just a few movements and just as easily removed. The sturdy bottom provides a secure stand on any surface, and at the destination, it can be comfortably carried by the handle or the removable shoulder strap. And it always looks good with its classic design. Gray strap bands, a high-quality metal label with the BMW Motorrad logo, and closure buckles made of brushed metal all perfectly complement the ideal look for the unadulterated design of the bike. High-quality side bag for the left side of the bike. Water-repellent canvas outer fabric and waterproof inner bag. Practical quick-release fastening. Color: Black with gray strap bands. Perfectly matched to the design of the bike. Without mounting parts!!! Material: Water-repellent outer fabric made of canvas

Practical and beautiful: The left side bag of the Leather Edition impresses not only with its timelessly elegant classic look but also with a variety of useful features. Under its water-repellent outer layer made of black-washed canvas with genuine leather straps, it offers around 9 liters of storage volume in the waterproof, removable inner bag with roll closure. The sturdy bottom made of genuine leather ensures a good stand. The practical quick-release fastening for attaching and detaching from the side bag carrier, the removable shoulder strap, and the convenient carrying handle provide easy handling and high comfort when transporting to and from the machine. With its classic look, the side bag perfectly matches other offerings from the Leather Edition collection, such as the tank bag or the small tank bag. Classic design and modern fastening concept. Waterproof, removable inner bag with roll closure. Storage volume: 9 liters, dimensions (L x W x H): 31 x 26 x 14 cm. Made from water-repellent black-washed canvas with brown genuine leather straps. Visually perfectly matching other offerings from the Leather Edition. Without mounting parts !!!