Angeboten wird hier ein Gebrauchtteil Fahrzeug: K25 R1200GS + Adventure K21 R nineT ... Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet,Kratzer Teilenummer: 11147675089

Adapter Cap for Gear LeverSimply slide the gear lever adapter over the existing gear lever. This extension allows for safer shifting and better accessibility. The gear lever is extended by 15 mm outward.By making a saw cut in the cap, it can be compressed in a vice and adjusted to the often reduced Ø of the gear lever rubber due to wear.Easy installation using clamping technology.We have revised the gear lever cap and equipped it with a black plastic cap. This has resulted in a smoother shifting process and protects the boot.For gear levers with a rubber pad Ø of 19 mm, we recommend our gear lever cap. It extends the gear lever by 15 mm outward, making it more accessible.All items have been mounted and tested on original motorcycles - without any modifications.

To be placed on the Rack-Pack, Travel-Zip, or as side bags. These bags allow you to store small items that would otherwise get lost in the vastness of large packing bags. They are also useful for keeping the first aid kit readily accessible. The clever attachment allows the bag to be quickly removed without tools.Best visibility and thus safety!Due to its exposed position, the neon yellow Cordura bag is visible from all sides, providing additional safety. It is never obscured by the rider, and woven reflective threads bounce back any incoming light strikingly at night.Material: PU-coated CORDURA®, dustproof and waterproof (IP64)Size: SColor: neon yellowCapacity: 2.0 litersWeight: 105 g

NEW!!! R Nine T Adjustable Clip-On Handlebars MultiClip Ø55/70 mm Clip-On Handlebars multiClip The clip-on handlebars that adapt to the rider * Individually adjustable clip-on handlebars that adapt to the rider * Tour version: Height adjustment approx. + 70 mm from the original handlebar position * Also suitable for fork diameters 41/43/45/48/50/53/55/58 mm * Laser scaling for symmetrical and correct adjustment in all positions * Maximum safety against twisting due to triple clamping on the fork * Handlebar tube bend of 5° for optimal fine adjustment * CNC machined from high-strength aluminum, black anodized

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

  Anlasserrelais   Originalersatzteil

TEXA Adapter Cable for Motorcycle Control Unit Diagnosis Adapter cable 3151/AP37 for serial diagnosis of the manufacturer BMW. Compatible with all vehicles from the production year 1999 to August 2016. Not compatible with Euro-4 vehicles (manufactured from September 2016) with OBD socket. The cable can also be used for the manufacturers GG TECHNIK, ROSENBAUER and on the models HUSQVARNA Nuda 900/R, TR 650 Strada, TR 650 Terra.

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 7 721 223 is used on the following vehicles:

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

BMW Keychain

FAR mirrors correspond in shape and function to the original part.Technical Data:Usage: Vehicle-specific Mirror Type: Bar mirror Mounting: M10 x 1.5 right Mirror Head Shape: Rhombus-shaped Mirror Head Width: 155 mmMirror Head Height: 90 mmMounting Side: Left Color: Black Material: Plastic With Indicator: No E-approved: Yes

FAR mirrors correspond in shape and function to the original part.Technical Data:Usage: Vehicle-specific Mirror Type: Bar mirror Mounting: M10 x 1.5 right Mirror Head Shape: Rhombus-shaped Mirror Head Width: 155 mmMirror Head Height: 90 mmMounting Side: Right Color: Black Material: Plastic With Indicator: No E-tested: Yes

Mehr Performance und Komfort für ihre BMW RnineT /Scrambler/Urban G/S mit dem Black-T Federbein-Typ Stage3. Ob sie nun zur Kurvenhatz oder einer gemütlichen Tour mit Freunden aufbrechen, der große Einstellbereich ermöglicht eine treffendere Anpassung von Balance und Dämpfung, als dies bei den Serienkomponenten möglich ist. Das Stage3 Federbein in Emulsionsausführung kann zur Beladungsanpassung auf das große Reisegepäck per Handrad und hydraulischer Federvorspannung justiert werden. Die Zugstufeneinstellung erlaubt die nötige Feinabstimmung auf jeden Straßenzustand und Einsatzzweck. Egal ob BAB/Schnellstraßen, Bundesstraßen, kleinste Landstraßen oder flotter, ambitionierter Fahrstil. Die neue Fahrwerksdimension für ihre /Scrambler/Urban G/S ab 2016.   Wichtiges in Kürze: - Das Federbein ist auf Basis unserer Erfahrungen für die BMW RnineT konfiguriert und fahrfertig eingestellt. - Parameter sind: Fahrzeuggewicht / Anlenkung des Federbeins / bauliche Gegebenheiten / Testfahrten. - Bei allen Fahrwerkslösungen sollten Heck- und Frontbereich des Motorrads angepasst werden. - Beim Austausch nur einer Komponente, wird kein optimales Fahrverhalten erzielt.   Eigenschaften des Black-T Stage3 Federbeins: - Das Federbeingehäuse ist aus Aluminium gefertigt. - Dadurch geringst mögliches Gewicht. - Es sind Reibungsarme Spezial-Dichtungen mit integriertem Teflon-Stützring für geringen Verschleiß und lange Lebensdauer der Federbeine. - Emulsionsbauweise-Bauweise und feineres Ansprechen des Federbeins. - Große 16 mm Kolbenstange aus Chrom-Molybdän-Stahl für maximale Stabilität und Haltbarkeit - 46mm Dämpferkolben mit speziellem Touratech-Setup. - Im Federbeinauge sind stabile Edelstahlbuchsen für die Befestigungsschrauben verbaut. - Dadurch stabiler, spielfreier Sitz der Befestigungsschraube auch bei höchsten Belastungen. - Alle Bauteile und Komponenten sind auf intensiven Einsatz im Reisebetrieb ausgelegt. - Hydraulische Highend-Federvorspannung über ein gut zugänglich positioniertes Handrad. - QR-Barcode auf dem Federbein mit den individuellen Federbein-Informationen. - Voll servicefähig. Dadurch dauerhaft höchste Fahrdynamik.   Das hier verbaute Grund-Setup ist abgestimmt auf Fahrer bis 100 kg zuzüglich Motorad-Bekleidung ausgelegt. Anpassungen bei sehr viel höheren Zuladungen oder anderen außergewöhnlichen Anforderungen sind möglich. Das Federbein wird dann von uns individuell an Ihre Bedürfnisse angepasst.   Lieferumfang: - Einbaufertiges Federbein. - ABE Unterlagen - Montageanleitung / Benutzer-Handbuch   "Optional" auch mit schwarzer Austauschfeder erhältlich   Sie haben weitere Fragen? Wir beraten Sie gern persönlich kontaktieren sie uns. E-Mail: [email protected] Telefon +49 (0)7728-9279-1555 Bitte nutzen Sie dafür unseren Fahrwerkscheck-Bogen und senden Sie uns das Formular ausgefüllt zu

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the BMW RnineT Pure. The shock absorber and the fork have a better setup for the demands of motorcycle touring. BLACK-T High End Suspension Components provide a significantly improved response and higher reserves in the limit range. Info: Fits only for “BMW RnineT Pure from 2017” Scope of delivery:- Replacement spring for the original shock absorber.- Replacement spring for the original fork.- Suitable fork oil.- Paste to improve the sliding properties of the inner tubes.- Including detailed installation instructions. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

This BLACK-T Stage4 shock absorber is perfectly tailored to the BMW RnineT/Urban G/S. Whether you're heading out for a twisty ride or a tour with friends, you can adjust this elegant shock absorber to suit any load and riding conditions at any time. From sporty dynamic riding to touring with a rear bag and/or passenger operation, any type of load can be compensated for by the very large adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel through the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for effective, precise, and personalized suspension settings tailored to your riding style at any time. For every road condition and purpose, whether on highways, federal roads, small country roads, or spirited, ambitious riding. You will experience a completely new riding sensation with your BMW RnineT /Scrambler/Urban G/S. Important points at a glance: - The shock absorber is configured based on our experiences for the BMW RnineT and is ready to install. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling. The basic setup used here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs. Scope of delivery: - Ready-to-install Black-T Stage4 shock absorber. - ABE documents - Installation instructions / user manual "Optional" also available with black replacement spring Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form

More performance and comfort for your BMW RnineT - Racer/Pure with the Black-T Stage3 Shock Absorber. Whether you're heading out for a twisty ride or a leisurely tour with friends, the wide adjustment range allows for a more precise tuning of balance and damping than is possible with the stock components. The Stage3 shock absorber in emulsion design can be adjusted for load adaptation to the large travel luggage via handwheel and hydraulic preload adjustment. The rebound adjustment allows for the necessary fine-tuning for any road condition and purpose. Whether it's highways, federal roads, small country roads, or a spirited, ambitious riding style. The new suspension dimension for your BMW RnineT - Racer/Pure from 2021.   Key points at a glance: - The shock absorber is configured based on our experiences for the BMW RnineT and is ready to ride. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling.   Features of the Black-T Stage3 Shock Absorber: - The shock absorber housing is made of aluminum. - This results in the lowest possible weight. - It features low-friction special seals with an integrated Teflon support ring for minimal   wear and long service life of the shock absorbers. - Emulsion construction and finer response of the shock absorber. - Large 16 mm piston rod made of chrome-molybdenum steel for maximum stability and durability. - 46mm damper piston with special Touratech setup. - Stable stainless steel bushings are installed in the shock eye for the mounting screws. - This ensures a stable, play-free fit of the mounting screw even under the highest loads. - All components are designed for intensive use in travel operations. - Hydraulic high-end preload adjustment via a conveniently positioned handwheel. - QR code on the shock absorber with individual shock absorber information. - Fully serviceable. This ensures consistently high riding dynamics.     The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of delivery: - Ready-to-install shock absorber. - ABE documents - Installation instructions / user manual   "Optional" also available with black replacement spring   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form

This BLACK-T Stage4 shock absorber is perfectly tailored for the BMW RnineT - Racer/Pure. Whether you're heading out for a twisty ride or a tour with friends, you can adjust this premium shock absorber to suit any load and riding conditions at any time. From sporty dynamic riding to touring with a rear bag and/or passenger operation, any type of additional load can be compensated for by the very large adjustment range. The balance of the motorcycle can be easily and quickly restored by hand using the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for effective, precise, and personalized suspension tuning at any time. For every road condition and purpose, whether on highways, main roads, small country roads, or spirited, ambitious riding. You will experience a completely new riding sensation with your BMW RnineT - Racer/Pure. Key points at a glance: - The shock absorber is configured and ready to ride based on our experiences for the BMW RnineT - Racer/Pure. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling. The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs. Scope of delivery: - Ready-to-install Black-T Stage4 shock absorber. - ABE documents - Installation instructions / user manual "Optional" also available with a black replacement spring Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document

BMC Replacement Air Filter   The acquired know-how from the racetracks is directly incorporated into the production of the series filters, to provide the demanding motorcyclist with a product that is tested, delivers performance, and is in a constant state of evolution.   The materials used are the best currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made from a special cotton fabric (4 layers), soaked in a low-tack oil.   It is encased in an aluminum mesh that is treated with an epoxy solution to resist gasoline vapors and oxidation. Additionally, the cotton has the advantage of being washable and reusable.   Due to these features, the BMC sport air filters (replacement air filters) guarantee a higher airflow compared to the original paper filters, a minimal pressure loss of the incoming air, and thus lead to better engine performance.   - Durability: washable and reusable, no replacement needed - Wider filter surface - Maximum air permeability (4 layers of cotton) - Higher absorption and filtration - Better pressure drop ratio - Tested by international testing procedures

Bremsscheibenschraube JMP Bolt Made from 316 stainless steel, which offers the following advantages: - excellent strength - outstanding corrosion resistance - high resistance to acids - black anodized Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.

The innovative tank bag mounting system - Fidlock patented This solid tank ring allows for the attachment of a Lock-it tank bag from Hepco&Becker.Included in the delivery is a Lock-it tank ring, as well as the counter holder, which can be individually screwed onto the tank bag depending on the tank shape and handlebar angle.The fuel cap can still be opened without any problems with the tank ring mounted.In general, you only need this tank ring and a tank bag from H&B, and you have everything you need.Each model-specific tank ring is usually available for the respective motorcycle model. If no tank ring is available, these universal tank rings can help. You can find the suitable tank ring by measuring various dimensions using the checklist here in the shop. FEATURES: absolutely secure hold, even at high speeds mechanical/magnetic locking easy operation the tank bag is simply inserted and locks automatically with an audible click thanks to the magnets Unlocking: The mechanism is unlocked by a strap in the forward direction on the tank bag; the tank bag is simply removed simple yet effective mechanics Fidlock patented shielded magnetic field, safe for credit cards and electronic devices Recommended maximum speed with mounted tank bag: 130 km/h (Please observe the motorcycle manufacturer's specifications, as well as the model-specific information in the manual or here with the product) Recommended load in the tank bag: approx. 3kg

Product Description: original BMW workshop equipment Contents 50 ml 29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For professional users only