Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   3.05 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   3.10 mm

Drive Shaft Damper Original Spare Part Damper shafts are used to absorb load changes in the drivetrain. This reduces load spikes at high speeds and during sudden braking.   Worn dampers are noticeable through increased play in the drivetrain and automatically lead to wear of the chain set.  

The high-quality material mix of plastic and stainless steel combines stability, low weight, and a unique appearance. Manufactured on precision machines, these protective parts fit perfectly and are incredibly easy to install. Supplied as a set for both sides.The fairings made from a plastic/stainless steel mix are easy to mount and protect the sensitive mechanics of the spring travel sensor just as perfectly as all components of the Dynamic ESA and the rear shock absorber.Not every GS rider appreciates the unobstructed view of hard-to-clean components in the rear area of the chassis, which is why our side fairings not only protect against splash water on the road and kicked-up dirt during off-road rides but also feature a smooth, easy-to-clean surface where dirt cannot settle!The visually two-part side fairing is connected by a high-quality laser-engraved stainless steel part, creating a perfect and easily removable unit. This also reduces the risk of snagging your boot on the vehicle frame, preventing any gear from unintentionally getting caught on the vehicle.Suitable for installation of the DIN ISO 4165 on-board socket (standard equipment from EURO5)

Side Stand

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration thanks to this practical accessory.Fits only with original BMW side stands for lowered chassis.

Is your bike leaning too much? Then our side stand extension for upright parking of the bike is just what you need.Especially with a "loaded" bike, it can happen that your motorcycle tips over in the original angle under unfavorable ground conditions. The adapter shoe provides the side stand with a corresponding extension, widening, and height increase, making it easier to stand the bike upright.Simply slide it on and tighten the internal hex screw.The adapter does not fit the Adventure model.Height increase: 17mmAll items have been mounted and tested on original motorcycles - without any modifications.

Is your bike leaning too much? Then our side stand extension for upright parking of the bike is just what you need.Especially with a "loaded" bike, it can happen that your motorcycle tips over in the original angle under unfavorable ground conditions. The adapter shoe provides the side stand with a corresponding extension, widening, and height increase, making it easier to stand the bike upright.Simply slide it on and tighten the internal hex screw.The adapter does not fit the Adventure model. There is a separate adapter for the 2010 model year.Height increase: 17mmAll items have been mounted and tested on original motorcycles - without any modifications.

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, and a short break is included. But it's easier said than done. Parking the vehicle on soft ground is a real issue! A small board or a similar base is usually never at hand when needed.Touratech has the solution:With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. Thanks to a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Fits only with original BMW side stands for lowered chassis.

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlargement, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlargement a great look and full stability. With a secure attachment of the foot enlargement, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Not suitable for lowered chassis.Suitable for special model R1200GS "Rallye" with special equipment "Sport chassis".Attention: Regardless of the respective model year, different side stands have been installed, so we recommend additionally checking the shape of your side stand.Please use for: - Wide shape 1021-01-045-5276-0- Narrow shape 01-045-5275-0

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER side stand enlargement! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black coated upper steel counter holder easy installation with just a few screws does not require ABE or registration

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER side stand enlargement! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black coated upper steel counter plate easy installation with just a few screws does not require ABE or registration

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER side stand enlargement! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black coated upper steel counterplate easy installation with just a few screws does not require ABE or registration

SIDEPIPE_GB25 - HATTECH Complete System for R80 R / R100 R Mystic as well as for R80 and R100 GS - Paralever - Complete system with header pipe and muffler - With EU type approval Complete system with header pipe (with interference pipe for better performance) and muffler - With EU type approval - available in various surface variants Hattech continues its classic and proven path with the new exhaust systems. Details about the mufflers: lying flat with interference pipe for better performance pipe connections are plugged and held with springs completely made of stainless steel all components welded using TIG welding available polished or brushed pleasant, sonorous, bassy sound at the volume level of the original noise reduction insert screwed into the muffler outlet and secured by welding EU type approval no registration in the vehicle documents necessary Note: Side stand must be modified/replaced by the customer. Note: Disassembly of the center stand required

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For this. thermic stressed. carbonpart. we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For this. thermic stressed. carbonpart. we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For this thermic stressed part we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Fahrzeugspezifische Information:  Ab 01.09.1980 SACHS Sintermetall-Kupplungen für BMW Motorräder    ·         Aufgesinterte Reibflächen, ohne Nieten ·         Außerordentlich hoher Reibwert für eine punktgenaue Leistung ·         Hervorragende Temperaturableitung und überaus belastbar   Anspruchsvolle Fahrer einer BMW mit Boxermotor werden die neue SACHS Sintermetall-Kupplung schätzen! Sie überzeugt selbst bei extremer Belastung mit ihrer ausgezeichneten Wärmeableitung und Temperaturbeständigkeit. Ihre Reibflächen werden im Sinterverfahren aus einer speziell abgestimmten Mischung von Metallpulvern hergestellt. Sie weisen eine extrem griffige, besonders verschleißfeste Oberfläche auf und sind präzise mit engsten Toleranzen geformt. Nieten kommen nicht zum Einsatz. Die Reibflächen werden im Sinterverfahren fest mit der Scheibe verbunden. Daraus resultieren eine perfekte Geometrie und die optimale Stärke der Pads.   Das Material der Reibflächen hat sich im internationalen Rennsport bereits vielfach bewährt. Es weist einen um etwa 40% höheren Reibwert auf als organische Produkte und erbringt die Leistung auf den Punkt. Die neue SACHS Sintermetall-Kupplung ermöglicht die Übertragung eines höheren Drehmoments und überzeugt mit ihrer langen Lebensdauer.

Sitzbank niedrig black

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

Simmerring and Dust Cap from SKF: - Less friction (approx. -20%) compared to conventional sealing rings - Use of a self-lubricating material - Less stick-slip - (Stick-slip = breakaway force caused by static friction) - Significantly improved sealing effect - Less air entry into the fork - Less dirt entry into the fork - Thus, less wear on sliding bushings and oil - Thus, preservation of the optimal sliding properties of the fork - Increased long-term sealing - Excellent water, dirt, and air tightness. UV resistant For: - BMW F850 GS - BMW F850GS Adventure Dimensions: Fork sealing ring Ø43 x 53.9 x 9.5mm / Wiper Ø Ø43 x 54.45 x 5.8Scope of delivery: 1 piece sealing ring 1 piece dust cap (Two sets are required for a complete fork)

SLC Seitenträger linksDie präzise, modellspezifische Entwicklung der Seitenträger erlaubt die einfache und sichere Montage an original Haltepunkten am Fahrzeug. Über ein Schnellverschluss-System lassen sich Seitentaschen mit wenigen Handgriffen anbringen und abnehmen, ohne dass der Fahrer auf eine zuverlässige Taschenbefestigung verzichten muss. Der SLC Träger gibt den Legend Gear Seitentaschen LC1/LC2, den URBAN ABS Seitenkoffern, den SysBag Taschen mit Adapterplatte, der Universal Seitenaufnahme und den Startnummernschildern sicheren Halt.Seitenträger passt sich perfekt in das Erscheinungsbild einModellspezifische Entwicklung garantiert beste Passform und ermöglicht Montage auf einer oder zwei SeitenKompatibel mit Legend Gear Seitentaschen LC1/LC2, URBAN ABS Seitenkoffern, SysBag Taschen mit Adapterplatte, Universal Seitenaufnahme, StartnummernschildDas Adapterkit ist bereits im Lieferumfang enthaltenLieferumfang1 x SLC Seitenträger linksMontagematerialDetailsMaterial: StahlOberfläche: pulverbeschichtetFarbe: schwarzGesamtgewicht: ca. 1,4 kgAchtungDer SLC Seitenträger ist NICHT kompatibel mit ALU-RACK GepäckträgerGenehmigungshinweisDieses Produkt muss nicht zugelassen werden. Es benötigt daher auch keine Prüfzeichen, Gutachten oder Allgemeine Betriebserlaubnis. Die Informationen in der Anbauanleitung sind zu beachten.

SLC Seitenträger rechtsDie präzise, modellspezifische Entwicklung der Seitenträger erlaubt die einfache und sichere Montage an original Haltepunkten am Fahrzeug. Über ein Schnellverschluss-System lassen sich Seitentaschen mit wenigen Handgriffen anbringen und abnehmen, ohne dass der Fahrer auf eine zuverlässige Taschenbefestigung verzichten muss. Der SLC Träger gibt den Legend Gear Seitentaschen LC1/LC2, den URBAN ABS Seitenkoffern, den SysBag Taschen mit Adapterplatte, der Universal Seitenaufnahme und den Startnummernschildern sicheren Halt.Seitenträger passt sich perfekt in das Erscheinungsbild einModellspezifische Entwicklung garantiert beste Passform und ermöglicht Montage auf einer oder zwei SeitenKompatibel mit Legend Gear Seitentaschen LC1/LC2, URBAN ABS Seitenkoffern, SysBag Taschen mit Adapterplatte, Universal Seitenaufnahme, StartnummernschildDas Adapterkit ist bereits im Lieferumfang enthaltenLieferumfang1 x SLC Seitenträger rechtsMontagematerialDetailsMaterial: StahlOberfläche: pulverbeschichtetFarbe: schwarzGesamtgewicht: ca. 1,3 kgAchtungDer SLC Seitenträger ist NICHT kompatibel mit ALU-RACK GepäckträgerGenehmigungshinweisDieses Produkt muss nicht zugelassen werden. Es benötigt daher auch keine Prüfzeichen, Gutachten oder Allgemeine Betriebserlaubnis. Die Informationen in der Anbauanleitung sind zu beachten.

8-piece tire repair kit for tubeless tires with tire repair sealing strips, tools, and the new Plug Bond from Slime- for motorcycles, quads, ATVs, cars, SUVs, lawnmowers, trailers, agriculture, and many more- tire repair kit with the new, non-toxic, safe, and patented Plug Bond from Slime- for quick and easy repair of flat tires without having to remove the wheel!- suitable only for emergencies and short-term repairs on motorcycles and cars: Have the tire repaired by a professional immediately after use for safety reasons!- contents: reamer, insertion tool with T-handle, 5x vulcanizing sealing strips, Plug Bond- new sealing strips can be purchased separately