The rear hugger for the BMW R 1250 GS replaced the orginial part easily. mounting with only 3 bolts on the bevel housing of the bike. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger for the BMW R 1150 GS is attached to the vehicle&rsquos brake calliper bracket using the included screws. We selected the length of the rear hugger to not only help keep the motorcycle clean. but the strut will also appreciate the protection from stone chips. dirt and &ldquosandblasting&rdquo. Installing an effective rear hugger will especially improve the life of the strut&rsquos seals and piston rod. This part is an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

The carbon rear hugger for the BMW S 1000 XR replaces the original part using the original mounting points. The rear part of the chain guard is already incorporated into this rear hugger. the original chain guard stays on the bike. We could extend the length of the rear hugger to improve the protection of the rear shock. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For this. thermic stressed. carbonpart. we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Rear Wheel Bushing Diameter = 15.8 mm Length = 84.5 mm

Vehicle-Specific Information:  Government VehiclesRegulator/Rectifier   For all BMW 2V Boxer models from 1969 (government version, black). 0.5 volts higher charging voltage.  

Offered here is a used part Vehicle: R45 Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown Part number: 12321244409

optional connecting rod for the stainless steel crash bar stainless steel electropolished easy installation for off-road use

Reinforcement Bracket for Engine Protection Bracket 5016514 for BMW R 1250 GS (2018-) additional stability in extreme use this bracket supports the stability of the Hepco&Becker engine protection bracket

With the Touratech reinforcement strut, the BMW engine protection bar of the water-cooled R1200GS becomes a fully-fledged crash bar! Because only the additional support point ensures maximum safety.Thanks to its electropolished surface and the use of the same diameters, it fits both technically and visually perfectly with the BMW engine protection bar of the GS.The reinforcement strut made of robust 25mm stainless steel pipe is incredibly easy to install. This is made possible by a novel connection technology.With little effort, the Touratech reinforcement strut provides a lot of added value!Fits BMW R1200GS from 2017 (BMW engine protection bar = accessory) and BMW R1200GS-Adventure from 2017 (BMW engine protection bar = standard).Set for both sides!Can be combined with R1200GS-Adventure from 2017 with fairing crash bar extension 045-5165.Also fits the special model "Adventure Triple Black".

Repair Kit for Fuel Pump Quick Coupling Spare Part for e.g. BMW R1200GS R1200R R1200RT K1200 .... This repair kit can be used to repair a leaking or broken connection on the fuel pump. The original screwed connections in the fuel pumps often have hairline cracks! Quick, cost-effective, and easy installation. Scope of delivery: 1 x Coupling nut part brass chrome-plated with shut-off, 3/8" NPT thread, fuel-resistant FKM sealFits:BMW R 1200 GS 2004-2012BMW R 1200 RT 2005-2013BMW R 900 RT 2005-2013BMW R 1200 R 2006-2013 BMW R 1200 GS Adventure 2005-2013BMW R1200 ST 2003-2007BMW R 1200 S 2004-2010 BMW K 1200 S K 1300 S 2003-2015 BMW K 1200 R K 1300 R 2004-2015 BMW K1200 R Sport BMW K 1200 GT K 1300 GT 2004-2010 Important Notes:CPC recommends using:Teflon tape or liquid sealant for thread sealing!Tighten the coupling by hand and then tighten it with a wrench for a maximum of 1-2 more turns!Never screw the thread in completely!With tapered threads, only the first three threads seal! During transport, the release pins on couplings with thumb buttons are often touched.As a result, the thumb button may be in the upper position, partially covering the opening.Please make sure to bring the thumb button to the lower position before connecting the plug! Original CPC product from the USA. No Chinese imitation!

Repair Kit for Fuel Pump CPC Quick Coupling Spare Part for Fuel Pump e.g. R1200GS R1200R R1200RT K1200.... see last image This repair kit can be used to repair a leaking or broken connection on the fuel pump. Original CPC with fuel-resistant rubber rings! Quick and easy installation. Scope of delivery: 1 x CPC coupling nut part plastic with shut-off, 3/8" NPT thread, FKM seal 1 x CPC angled connector brass chrome-plated with shut-off, 3/8" hose nozzle, FKM seal Attention important notes:CPC recommends for tapered threads:Teflon tape or liquid sealant for thread sealing!Tighten the coupling by hand and then tighten it with a wrench for a maximum of 1 – 2 more turns!Never fully screw in the thread!With tapered threads, only the first three threads seal anyway! During transport, the release pins on couplings with thumb buttons are often touched.As a result, the thumb button is in the upper position, partially covering the opening.Please make sure to bring the thumb button to the lower position before connecting the plug!

This product is not intended for installation by an end consumer. Installation should only be performed by individuals with the appropriate professional training or by a certified automotive workshop. For this reason, no installation instructions are included with the product. Prices are exclusive of installation costs. Additional Information

BMW Repair Kit Lock Cylinder for Seat, Navigator, Top Case, Touring Case...... 51257698204 With this repair kit, you can equip your BMW Touring Case + Top Case to match the vehicle key. It is also usable on the lockable navigation holder of the R1200GS. This lock cylinder is used, among other things, in the Touring Case and in the Top Case of the R1200R + R1200RT. You can find the complete list of applications here: K50 (R 1200 GS)   (10/2011 — 05/2016) K51 (R 1200 GS Adventure)   (09/2012 — 05/2016) K52 (R 1200 RT)   (01/2013 — 05/2016) K53 (R 1200 R)   (11/2013 — 05/2016) K54 (R 1200 RS)   (06/2014 — 05/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 12/2006) K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 05/2016) K70 (F 700 GS)   (06/2011 — 05/2016) K71 (F 800 S, F 800 ST, F800GT)   (12/2004 — 05/2016) K72 (F 650 GS, F 800 GS)   (10/2006 — 05/2016) K75 (F 800 GS Adventure)   (05/2012 — 05/2016) K73 (F 800 R)   (12/2005 — 05/2016) K42 (HP4)   (09/2011 — 07/2014) K46 (S 1000 RR)   (09/2008 — 05/2016) K47 (S 1000 R)   (02/2013 — 05/2016) K49 (S 1000 XR)   (05/2014 — 05/2016) If you have any further questions, just send us a message!

Reparatursatz InstrumentenkombinationAngeboten wird hier ein GebrauchtteilFahrzeug: R1200GS LC, R1200GS LC AdventureHersteller: BMWZustand: Gebraucht, 1 ganz leichter Kratzer auf der Scheibe, alle Halter okBeschreibung: wird verkauft wie abgebildetTeilenummer: 17428523118

This "linear" replacement spring is perfectly tuned to the original shock absorber of the BMW R1200GS / R1250GS. The shock absorber thus has a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA* Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop. Scope of delivery: - Replacement spring Linear 55 N/mm Front for original BMW shock absorber with Dynamic ESA. - Installation instructions. For all suspension solutions, both the rear and front areas of the motorcycle should be adjusted. You can find the suitable component for the rear of the BMW R1200GS / R1250GS in our accessory recommendation. Replacing only one component will not achieve optimal handling. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.

This "linear" replacement spring is perfectly tuned to the original shock absorber of the BMW R1200GS / R1250GS Adventure. The shock absorber thus has a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS / 1250GS Adventure 2014-2023 with BMW Dynamic ESA* Our recommendation: The conversion of the replacement springs should, especially with ESA shock absorbers, be carried out by a specialist workshop. Scope of delivery: - Replacement spring Linear 60 N/mm Front for original BMW shock absorber with Dynamic ESA. - Installation instructions online For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable component for the rear of the BMW R1200GS / R1250GS Adventure in our accessory recommendation. When replacing only one component, optimal handling is not achieved. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

This "linear" replacement spring is perfectly tuned to the original shock absorber of the BMW R1200GS / R1250GS. The shock absorber thus has a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA* Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop. Scope of delivery: - Replacement spring Linear 150N/mm Rear for original BMW shock absorber with Dynamic ESA. - Installation instructions. For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable component for the rear of the BMW R1200GS / R1250GS in our accessory recommendation. When replacing only one component, optimal handling is not achieved. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These linear replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS / R1250GS models. The front and rear shock absorbers have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for * BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA*   Our recommendation: The installation of the replacement springs should, especially with ESA shock absorbers, be carried out by a professional workshop.   Scope of delivery: - Replacement spring linear (55 N/mm) front for original shock absorber. - Replacement spring linear (150 N/mm) rear for original shock absorber. - Installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.                        

Delivery time 3-4 weeks BMW K1200S and S1000XR Rider Footpeg - Hydraulically AdjustableSupersport or touring at the push of a button while ridingEvery touring rider who leans into a turn sometimes thinks: “Now the peg should be higher!” And every sport rider wishes, when going on a long tour: “Now the peg should be lower!”.The world's first hydraulic, electrically adjustable supersport rider footpeg - certified by TÜVThe sensational aspect of this footpeg system lies in the ability to make a height adjustment of 45 mm within 0.5-3 seconds - at the push of a button while riding.This means having a comfortable knee angle on straight roads or raising the peg up in sport mode to achieve even more lean angle.You achieve the ergonomics you need for each tour and can thus set the peg higher or lower.The first version with the upper setting is equal to the original footpeg height of your sport bike, while the lower position provides a significantly more relaxed seating position and a more comfortable knee angle.The next version for the extreme sport rider involves splitting the travel, e.g., 22.5 mm - even higher than original and then also 22.5 mm - even lower than original.Your motorcycle will thus become significantly more versatile and, for the first time, adapted to the rider - and that at the push of a button while riding.The adjustable adapter can be installed on almost 80% of all motorcycles, provided there is enough space under the footpeg and no shift or brake lever interferes to lower the footpegs by 45 mm.Here we have installed it on a BMW K1200S and BMW K1200GT 06 All items have been mounted and tested on original motorcycles - without any modifications.

Footpeg Lowering Kit for BMW F900XR F900R To individually enhance seating comfort, we have developed this footpeg lowering kit for the BMW F900XR - F900R. Perhaps you have already experienced discomfort in your knees and groin during a longer ride. With our modifications, you can enjoy the legroom that corresponds to your height. The footpeg is lowered by 40 mm, aligning with natural ergonomics and seating position. For off-road riding, the footpeg can be quickly swapped back to the original. Please note that ground clearance is reduced with a footpeg lowering kit. The advantage of this adapter is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352