Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with a compatible fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The ribs attached to the sides of the magnets mechanically secure the system. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Waterproof, integrated inner bag with roll closure Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessories: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic molded parts absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be supplied with the same key (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic molded parts absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be supplied with the same key (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic molded parts absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be keyed alike (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

The fixed side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is bolted to the rear right and left of the carrier and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tube MADE IN GERMANY firmly bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please observe model-specific notes from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Indicators remain in their original position. Carrier fits for solo and dual seat. Symmetrical complete carrier/case carrier for models with 2in2 exhaust system.

The fixed side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is screwed onto the carrier at the rear right and left and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tube MADE IN GERMANY firmly bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please observe model-specific notes from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 ltr. & 40 ltr. in combination. Xplorerkoffer restrict legroom for the passenger.

The fixed side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case (Article number: 700114). This aluminum adapter is bolted to the rear right and left of the carrier and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and the model-specific notes. Construction from steel tube MADE IN GERMANY Firmly bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please observe model-specific notes from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 liters & 40 liters in combination. Xplorerkoffer restricts legroom for the passenger. Example image!!!

The fixed side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is screwed onto the carrier at the rear right and left and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tube MADE IN GERMANY firmly bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please observe model-specific notes from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Firmly bolted to the motorcycle frame (no Lock-it system). Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 liters & 40 liters in combination. Example image!!!

The fixed side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is screwed onto the carrier at the rear right and left and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tube MADE IN GERMANY firmly bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please observe model-specific notes from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 ltr. & 40 ltr. in combination. Xplorerkoffer restricts legroom for the passenger.

The permanently bolted side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is bolted to the rear right and left of the carrier and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's legs or the passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and the model-specific notes. Construction from steel tubing MADE IN GERMANY Permanently bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please note model-specific information from the motorcycle manufacturers or notes in the installation instructions) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Side case recommendation: Junior 30, Alu-Exclusiv 30, Alu-Standard 35, Xplorer 30. Example image!!!

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the specific motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical case carrier: We recommend using two different cases (40ltr & 30ltr)

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the specific motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes for asymmetric side case carriers. Recommendation: use a narrower case on the exhaust side, e.g., 30 liters & 40 liters in combination. Example image!!!

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the respective motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 ltr. & 40 ltr. in combination. Turn signals remain in the original position. Example image!!!

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the specific motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetric side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 ltr. & 40 ltr. in combination.

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the specific motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side. e.g. 30 ltr. & 40 ltr. in combination. Turn signals remain in the original position.

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the specific motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As a theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Compatible with most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the respective motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side. e.g. 30 ltr. & 40 ltr. in combination. Turn signals remain in the original position.

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the specific motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side. e.g. 30 ltr. & 40 ltr. in combination.

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the respective motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetric side case carrier. Recommendation: use a narrower case on the exhaust side. e.g. 30 ltr. & 40 ltr. in combination. Turn signals remain in the original position.

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the specific motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes for asymmetric side case carriers. Recommendation: use a narrower case on the exhaust side, e.g., 30 liters & 40 liters in combination.

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counterplate easy installation with just a few screws does not require ABE or registration

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counterplate easy installation with just a few screws does not require ABE or registration

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black coated upper steel counterplate easy installation with just a few screws does not require ABE or registration

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counterplate easy installation with just a few screws does not require ABE or registration