JMP starter brushes for Japanese motorcycles. As original spare parts, starter brushes are usually onlydelivered completely mounted on a base plate and aretherefore very expensive. 12.0 x 8.9 x 5.9 mm

To make the vehicle airier and lighter, the original air filter box must be removed. Alternatively, either open filters or open intake funnels are directly screwed onto the carburetors, and the original plate air filter along with the intake snorkels make way for this custom and precisely fitting cover made of high-quality real carbon – this is how a true boxer should look. Cover with hole for K&N engine ventilation. For models with plate air filter from model year 09|80.

 To make the vehicle airier and lighter, the original air filter box must be removed. Alternatively, either open filters or open intake funnels are directly screwed onto the carburetors, and the original plate air filter along with the intake snorkels make way for this custom and precisely fitting cover made of high-quality real carbon – this is how a true boxer should look. Cover without drilling for K&N engine ventilation. For models with plate air filter from model year 09|80.

Our carbon handguards for the BMW F 800 GS Adventure (2013-present) / R 1200 GS (LC) (2013-present) / R 1200 GS Adventure (LC) (2013-present) offer significantly increased protection against cold and rain. Thanks to a cleverly chosen design, the handguards do not appear significantly larger than the original part and integrate perfectly into the overall look of the R 1200 GS. The carbon handguards for the BMW F 800 GS Adventure (2013-present) / R 1200 GS (LC) (2013-present) / R 1200 GS Adventure (LC) (2013-present) replace the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part is manufactured according to the latest guidelines in an autoclave entirely from prepreg (see FAQ) material and, as is customary for us, is coated with a clear plastic layer for protection against environmental influences in the next step. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. Not only does the coating excel technically, but it also emphasizes the three-dimensional effect of the carbon structure.

Our carbon handguards for the BMW R 1250 GS provide significantly increased protection against cold and rainwater. Thanks to a cleverly chosen design, the handguards do not appear significantly larger than the original part and integrate excellently into the overall look of the R 1250 GS. The carbon handguards for the BMW R 1250 GS replace the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness.The carbon part has been completely manufactured in the autoclave according to the latest guidelines from prepreg (see FAQ) material and, as is customary for us, has been coated with a clear plastic coating for protection against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly. Corresponds to BMW part number: 46 63 8 523 432

The splash guard on the license plate holder in carbon for the BMW S 1000 XR replaces the original component using the original mounting points. This component can be used with both our license plate holder 1004-NHO.007.S10XR.K and the original license plate holder. The focus is on the great appearance, weight savings (typically a reduction of about 70% compared to the original component), and increased stiffness.The carbon part has been completely manufactured according to the latest guidelines in an autoclave from prepreg (see FAQ) material and, as is customary for us, has been coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Carburetor diaphragm for Bing constant pressure carburetor 40mm throttle

Carburetor diaphragm for Bing constant pressure carburetor   32mm throttle

Choke return spring for 32mm carburetor

A small part prevents expensive damage!Unfortunately, even a simple tip-over of the motorcycle while stationary can cause severe scratches and further damage to the gearbox housing of the R1300/1250/R1200. If such an accident occurs off-road, debris and dirt can even lead to damage to the rear axle seal, and in the worst case, continuing to ride may not be possible due to leaking oil!By timely installation of the highly durable, elegantly designed crash pads, this risk can be eliminated and costly follow-up damages can be prevented!-easy installation and excellent durability-Material mix of high-strength aluminum and durable PE plastic-uniquely elegant, sporty design with a textured surface-slight chamfer for maximum lean angle freedom on the road and optimal clearance off-road-easy disassembly possible if neededColor: black / silver

The exposed rear axle housing unfortunately suffers greatly during off-road rides and is often damaged so severely that further travel is out of the question.To avoid scratches and stone chips, as well as more serious damage when hitting gravel or other obstacles, we have developed a perfect protection.It fits snugly around the cardan housing like a protective hand and is made from extremely impact-resistant, fiberglass-reinforced plastic. Of course, we have taken into account the cooling air supply provided by BMW and left the corresponding opening at the bottom free.Last but not least, our cardan grinding protection gives your BMW a distinctive, individual look!The attachment is done with an easy-to-install mounting kit made of anodized aluminum.Optional: Cardan crash pad 01-045-5505-0-made of fiberglass-reinforced PU plastic-easy to install-maximum protection effect -lightweight-fascinating appearance-repellent function even against branches and loose stonesColor: black

Practical carrying aid for luggage system. Attachment for additional luggage items. Additional Information

Champion Spark Plug

Vehicle-Specific Information:  belowOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Fork Tubes by JMP   - made from high-quality raw materials - special chrome coating with low breakaway torque - each tube undergoes a quality inspection before delivery - manufactured on state-of-the-art CNC machines in Central EuropeTechnical Data:Upside down:   No Outer diameter:   36 mmInner diameter:   28 mmLength:   614 mmTop connection:   Internal thread Bottom connection:   No thread Thread:   30 x 1.5 Color:   chrome

Fork Tubes by JMP   - made from high-quality raw materials - special chrome coating with low breakaway torque - each fork tube undergoes a quality inspection before delivery - manufactured on state-of-the-art CNC machines in Central EuropeTechnical Data:Upside down:   No Outer diameter:   40 mmInner diameter:   34 mmLength:   700 mmTop connection:   Internal thread Bottom connection:   No thread Thread:   36 x 1.5 Color:   chrome

Clip spring for float needle Bing constant pressure carburetor type 64-3.

Vehicle-Specific Information: for raised handlebarsOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides permanent lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Vehicle-Specific Information: for raised handlebarsOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Clutch Cover BMW S1000XR from 2015 The clutch cover in Carbon for the BMW S 1000 XR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Clutch Friction Plate Note: 6 pieces are required.

Clutch Push Piston

Clutch Release Lever Clutch Lever for R850 + R1100 transmission with clutch cable Improved version Due to numerous requests from you, we have searched for a solution to a common problem and developed this improved clutch release lever. It is mounted on the back of the transmission and accommodates the clutch cable. Never again should your tour abruptly end somewhere in the middle of nowhere. The clutch release levers often break at the bottom of the transmission. Original spare parts are often unavailable. Therefore, we have manufactured a reinforced clutch lever from high-strength aluminum. We have increased the material thickness by about 30%. During the next transmission repair or clutch replacement, this lever can replace the original, reducing a critical point on your motorcycle. Alternatively, you can take it as a spare part (emergency tool) on your travels for emergencies. We have already saved some of you on vacation, trips, or tours with a DHL Express delivery. This option is, of course, also available. As roadside assistance, we ship spare parts, like this lever, as well as many other items, around the globe to help you. This lever corresponds to the BMW ETK part number 23131340829. The lever 23 13 1 340 829 fits the following vehicles: R 850 GS Type 259 R 1100 GS Type 259 R 850 R Type 259 R 1100 R Type 259 R 850 RT Type 259 R 1100 RT Type 259 R 1100 RS Type 259 NOTE: The original bearing sleeve and adjustment screw must be retained!

Clutch Screw Attention: 6 pieces are required!