Windshields & Crash Bars

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Not suitable for lowered suspension.Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5276-0 for that.Attention: Regardless of the model year, different side stands have been installed, so we recommend checking the shape of your side stand as well.Please use for: - Wide shape 01-045-5276-0- Narrow shape 1021-01-045-5275-0

Without a functioning side stand switch, your ride with the GS-Adventure is immediately over, as the ignition is interrupted.With the Touratech side stand switch protection, this extremely important component is perfectly protected from damage. Neither the tip of your boots nor branches or stones can harm it.Made from 1.5 mm thick stainless steel and supplied with all the necessary parts for installation, this nearly indestructible protection can be easily and quickly mounted.An absolute safety plus, both on and off-road!

Perfect protection and value retention for the GS frame! Experience over many years has unfortunately shown that protection for the painted frame tubes in the boot area is actually essential.Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use will make the frame unsightly in no time as the paint gets worn off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Color: black

Perfect protection and value retention for the GS frame! Experience over many years has unfortunately shown that protection for the painted frame tubes in the boot area is actually essential.Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use will make the frame unsightly in a very short time as the paint gets worn off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide a stunning effect with minimal effort!Color: black

The black anodized splash guard is mounted behind the license plate holder and extends it downwards and backwards. It effectively prevents kicked-up dirt from soiling or even damaging the seat, clothing, or luggage. The aluminum splash guard additionally stabilizes the license plate and prevents it from vibrating loose. Material: black anodized aluminum

The touring screen is generally longer, and sometimes wider than the original screen, to better protect the rider from wind and weather. Depending on the angle of the screen, in some models the rear edge of the screen is also tilted upwards as a wind deflector across the entire width. This makes riding more comfortable even on longer trips.

This touring screen features a spoiler at the end that can be manually adjusted to the desired position in seven stages. The airflow behind the spoiler reduces wind pressure on the rider while simultaneously minimizing turbulence. The Vario touring screen is available in clear and smoke gray.

TOURATECH reinforcement bar steel for original BMW  Engine guard BMW R1200GS from 2013 / BMW R1200GS  Adventure from 2014 item Description  With the Touratech reinforcing brace of BMW engine guard the water-cooled R1200GS until a full-fledged crash bar is! Because only the additional support point ensures maximum Sicherheit.Durch their electro-polished surface and the use of the same diameter to fit both technically and visually fits the BMW engine guard of GS.Die reinforcement support from robust 25mm stainless steel pipe is easy to assemble. This is made possible by a novel Verbindungstechnik.Mit little effort Touratech reinforcing brace for much added value makes!  Adjusts BMW R1200GS from 2013 (BMW engine guard = accessories) and BMW R1200GS Adventure from 2014 (= BMW engine guard series) .Set for both sides Note: Can not be combined to R1200GS Adventure from 2014 with panel Sturzbügel extension 045-5165.  

zusätzliche Stabilität bei extremen Einsatz dieser Bügel unterstützt die Stabilität des Hepco&Becker Motorschutzbügels

Complete screen with X-creen Sport. This is an attachment spoiler that can be adjusted to nearly any position. The small spoiler (size 260mm x 100mm) can be adjusted in height, angle, and distance from the screen via double joints, providing remarkable relief from wind pressure even on sporty motorcycles. It can function as a screen extension with an adjustable wind deflector, as well as a diffuser in front of the screen that gently reduces airflow. Alternatively, if desired, it can direct the wind towards the rider for a refreshing breeze on hot days.

The X-creen screen consists of a base screen and the multi-adjustable X-creen spoiler. The delivery includes two joint versions: single joint "S" and double joint "D", which can be mounted optionally. The "S" variant is recommended for customers who are comfortable with the screen height and only want to adjust the spoiler angle. Customers who find the "S" variant too high or too low can use the "D" variant to adjust the height of the spoiler by 110mm, while also being able to adjust the spoiler angle independently of the height, as well as the distance to the base screen. This allows the X-Creen to be optimally adjusted to the individual needs of the rider.