The mounting adapter is simply attached to the handlebar clamps of your BMW. All of our GPS mounts fit perfectly on its 12 mm strut. This allows you to easily and securely attach your GPS device. The view of the instruments remains unobstructed.Mounting adapter / GPS mount / Navigation device holder

Our headlight guard has proven itself thousands of times over the years. Even larger debris cannot harm the headlight of your machine!Equipped with a quick-release mechanism and made of robust stainless steel with a black powder-coated surface!This allows you to easily clip on or remove the headlight guard as needed. Only the side struts are securely and firmly bolted.Of course, everything necessary for installation is included in the delivery.The headlight guard is designed for off-road use and is not permitted under the German Road Traffic Regulations (StVO). Please check your national regulations!

BMW K50 R1200GS LC / K51 R1200GS Adventure LC Variocases right item Description The waterproof Vario cases are equipped with a patented adjustment mechanism. The volume can be of a total of 68 l (29 l to the left, right 39 l) reduced to 50 l (20 l to the left, 30 l right). This pays especially in city traffic, because the width is reduced to 120 mm. Black plastic case with aluminum insert in the lid Variable volume by moving a bar Volume: approximately 20 to 29 l (right), about 30 to 39 l (left) Innovative connection mechanism to the vehicle Optional: inside pockets A patented adjustment mechanism that allows the volume quickly and conveniently vary with one hand by moving a bar. The reduced volume under reduced by 120 mm width pays off especially in city traffic. Case holder visually well integrated into the vehicle, also available as special equipment (SA 0681) Vehicle key system possible Maximum load per case: 10 kg Recommended maximum speed with suitcases: 180 km / h Delivery: Delivery without luggage holder and without barrel.

BMW K50 R1200GS LC K51 R 1200 GS Adventure LC original motor protection aluminum Enduro NEW item Description Robust protection of aluminum, 2 mm thick, anodized. Stainless steel holder. Protects the lower engine compartment against stones and bottoming. Significantly wider and longer than series motor protection. Enhances the offroad character. Weight: 1.5 kg. VIN is needed. This product is dependent on the individual equipment and / or production date of your BMW motorcycle.

The frame protector made of black plastic effectively protects the frame from scratches and prevents wear spots caused by motorcycle boots. Frame protector made of polyamide Protects the frame from scratches Especially during heavy boot use off-road Color: black (textured) Fits the following vehicles: - R1200GS LC - R1200GS LC Adventure - R1250GS - R1250GS Adventure

The Variokoffer with patented adjustable mechanism offers a storage capacity of 30 to 39 liters. The variable volume is particularly beneficial in city traffic, as the width of the case can be reduced simultaneously. The Variokoffer is also waterproof and suitable for off-road use. Prerequisite are the mounts for Variokoffer (support at the passenger footpeg holders). These variable motorcycle cases do not fit the mounts for the BMW aluminum cases. Order the programmable locking cylinders with the part number 1001-51257698202 at the same time. One locking cylinder is required per case/top case. You can adapt these to your motorcycle key, allowing you to lock all locks with the vehicle key.

To be able to maneuver the GS sportily off-road, we have developed a brake lever that includes all the details that we believe are still missing from the original lever:The Touratech brake lever for the GS features a foldable end piece made of electropolished stainless steel, making it resilient even against harsh impacts.Additionally, it is infinitely adjustable, allowing it to fit any foot and riding style! Compared to the original, the Touratech brake lever is adjustable in length by +5/-5mm and in height by +4/+10mm. This significantly eases braking while standing.As a "finishing touch" and for tough use, the brake lever has the option for attachment of a safety cord.Material:Lever: Stainless steel, black powder-coated End piece: Stainless steel, electropolishedNote:The Touratech stainless steel foldable brake lever is already 13mm higher in its low setting than the original brake lever.

BMW R1200GS R1250GS LC + Adventure original headlight protection Trophy Product Details Protects the lens from stone impacts during off-road use. Snap-lock system for easy and quick installation and removal. For off-road use only.

Easy and quick to install protection. For off-road use only, away from public roads. Impact-resistant plastic with scratch-resistant coating. Additional Information

BMW R1200GS R1250GS R1200GS LC Adv Kofferhalter für Variokoffer schwarz Der Satz enthält zwei schwarze Kofferhalter für Variokoffer. Sie fallen ohne Koffer am Motorrad kaum auf und sind sehr robust. Mit diesen Haltern und den praktischen Variokoffern sind viele Reisen und Alltagssituationen problemlos zu bewältigen.  Leichte und sichere KoffermontagePerfekte Integration in das Gesamtbild des MotorradsSatz mit zwei Kofferhaltern zur rechts- und linksseitigen MontageFarbe: Schwarz

Padded and shape-stable storage compartment for small parts. Attachment with Velcro straps. Quick access via zipper. Perfect space utilization under the rider's seat on both sides. Additional Information

BMW Repair Kit Lock Cylinder for Variokoffer Variotopcase...... 51257698202 With this repair kit, you can equip your BMW Variokoffer + Topcase to match the vehicle key. This lock cylinder is used, among other things, in the Variokoffer and in the Topcase of the R1200GS LC + R1200GS LC Adventure, F650GS Twin, F800GS. On the R1200R, R1200RT, R1200ST, it is used in the fuel cap. You can find the complete list of applications here: K50 (R 1200 GS)   (10/2011 — 12/2016) K51 (R 1200 GS Adventure)   (09/2012 — 12/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 08/2006) K26 (R 900 RT, R 1200 RT)   (03/2009 — 09/2013) K27 (R 1200 R)   (12/2009 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K40 (K 1200 S, K 1300 S)   (04/2003 — 08/2008) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 08/2008) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 09/2008) K72 (F 650 GS, F 800 GS)   (10/2006 — 12/2016) K75 (F 800 GS Adventure)   (05/2012 — 12/2016)

The Variokoffer with patented adjustable mechanism offers a storage capacity of 30 to 39 liters. The variable volume is particularly beneficial in city traffic, as it allows the width of the case to be reduced simultaneously. The Variokoffer is also waterproof and suitable for off-road use. Prerequisite are the mounts for Variokoffer (support at the passenger footpeg holders). These variable motorcycle cases do not fit the mounts for the BMW aluminum cases. Order the programmable locking cylinders with the part number 1001-51257698202 at the same time. One locking cylinder is required per case/top case. You can adapt these to your motorcycle key, allowing you to lock all locks with the vehicle key.

This is a new part offered Vehicle: R1200GS LC + Adventure LC Manufacturer: BMW Condition: New with storage marks Description: sold as shown Part number: 34118405105

Brake-pipe Cover Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Our carbon handguards for the BMW F 800 GS Adventure (2013-present) / R 1200 GS (LC) (2013-present) / R 1200 GS Adventure (LC) (2013-present) offer significantly increased protection against cold and rain. Thanks to a cleverly chosen design, the handguards do not appear significantly larger than the original part and integrate perfectly into the overall look of the R 1200 GS. The carbon handguards for the BMW F 800 GS Adventure (2013-present) / R 1200 GS (LC) (2013-present) / R 1200 GS Adventure (LC) (2013-present) replace the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part is manufactured according to the latest guidelines in an autoclave entirely from prepreg (see FAQ) material and, as is customary for us, is coated with a clear plastic layer for protection against environmental influences in the next step. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. Not only does the coating excel technically, but it also emphasizes the three-dimensional effect of the carbon structure.

A small part prevents expensive damage!Unfortunately, even a simple tip-over of the motorcycle while stationary can cause severe scratches and further damage to the gearbox housing of the R1300/1250/R1200. If such an accident occurs off-road, debris and dirt can even lead to damage to the rear axle seal, and in the worst case, continuing to ride may not be possible due to leaking oil!By timely installation of the highly durable, elegantly designed crash pads, this risk can be eliminated and costly follow-up damages can be prevented!-easy installation and excellent durability-Material mix of high-strength aluminum and durable PE plastic-uniquely elegant, sporty design with a textured surface-slight chamfer for maximum lean angle freedom on the road and optimal clearance off-road-easy disassembly possible if neededColor: black / silver

The exposed rear axle housing unfortunately suffers greatly during off-road rides and is often damaged so severely that further travel is out of the question.To avoid scratches and stone chips, as well as more serious damage when hitting gravel or other obstacles, we have developed a perfect protection.It fits snugly around the cardan housing like a protective hand and is made from extremely impact-resistant, fiberglass-reinforced plastic. Of course, we have taken into account the cooling air supply provided by BMW and left the corresponding opening at the bottom free.Last but not least, our cardan grinding protection gives your BMW a distinctive, individual look!The attachment is done with an easy-to-install mounting kit made of anodized aluminum.Optional: Cardan crash pad 01-045-5505-0-made of fiberglass-reinforced PU plastic-easy to install-maximum protection effect -lightweight-fascinating appearance-repellent function even against branches and loose stonesColor: black

Practical carrying aid for luggage system. Attachment for additional luggage items. Additional Information

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

There’s no better way to sit!For the highest demands, we offer the proven comfort seat in our patented, breathable version!The seat construction is based on an open-pore foam core, on which a spacer fabric is applied in the seating area to allow air exchange through the highly durable, elastic, and waterproof textile cover.The result of this elaborate construction is overwhelming and ensures the highest riding comfort not only on long distances but also at high outside temperatures and extreme humidity. However, there are no disadvantages or limitations in normal everyday use. On the contrary, for example, the formation of wrinkles or creases in the undergarments is avoided from the very first kilometer due to the air exchange!The ultimate seat for rider and passenger!The high-quality seat is delivered completely ready for installation and without any time loss from reupholstering; no adjustments to the vehicle are necessary, and you can keep your original seat.Facts:- anatomically adapted contour developed in extensive riding tests in Germany- no sagging due to the use of a high-strength foam produced in-house- even weight distribution, optimized vehicle contact, and perfect control- bi-elastic cover material with sealed seams- hollow groove (depression) in the center of the seat for tailbone relief- different heights available- optimally positioned seams to avoid pressure points in the seating area- suitable for long distances- the standard adjustment of the seat height remains intact- highest quality materials and workmanship- seats can be used modularly, fitting together with the original passenger or rider seat- Explanations for measuring seat height can be found under "Additional Information"Our rider and passenger seats can only be used together on the Adventure!Height: 53.5/55 cmOriginal height R1200GS: 52/53.5 cmOriginal height BMW R1200GS Adventure from 2014: 54/55.5 cm

The right seat for the sporty GS rider!For those who desire more freedom of movement for sporty and dynamic riding on the road and off-road on their GS, we offer the perfect solution here.On a high-strength, precisely fitting seat base made of plastic developed by Touratech, we provide the ideal conditions for spontaneous reactions when needed with a one-piece, high-density foam core and a tear-resistant, sweat-resistant, bi-elastic seat cover.Thanks to the optimized contour of the seating surfaces and the ability to easily change the seating position, long stretches are now possible without any issues. Despite the rider-oriented design of this seat, it offers enough space for two people, and the contact between the rider and passenger is even improved by the one-piece construction!Last but not least, the GS gains an exclusive, individual appearance with this one-piece sports seat!The high-quality, multi-layer seat cover is equipped with a durable Fresh Touch surface coating. It noticeably reduces the surface temperature by reflecting infrared light radiation and provides a more pleasant, cooler feeling when sitting on a motorcycle parked in the sun.An additional, exclusive comfort gain that creates enthusiasm!The high-quality seat is delivered completely ready for installation and without any time loss due to reupholstering; no adjustments to the vehicle are necessary, and you can keep your original seat.Facts:- anatomically adapted contour developed in extensive riding tests in Germany - no sagging due to the use of a high-density foam produced in-house- even weight distribution, optimized vehicle contact, and perfect control- bi-elastic cover material with sealed seams- hollow groove in the center of the seat for tailbone relief- different heights available- optimally positioned seams to avoid pressure points in the seating area- suitable for long distances- highest quality materials and workmanship- made in Germany- the seat is waterproof- thanks to the Fresh Touch surface coating, up to 10°C temperature difference compared to the original seat coverHeight: 50 cmOriginal height BMW R1200GS (LC): 52/53.5 cmOriginal height BMW R1200GS Adventure (LC): 54/55.5 cmExplanations for measuring seat height can be found under "Additional Information"

The right seat for the sporty GS rider!For those who desire more freedom of movement for sporty and dynamic riding on the road and off-road on their GS, we offer the perfect solution here.On a high-strength, precisely fitting seat base made of plastic developed by Touratech, we provide the ideal conditions for spontaneous reactions when needed with a one-piece, high-density foam core and a tear-resistant, sweat-resistant, bi-elastic seat cover.Thanks to the optimized contour of the seating surfaces and the ability to easily change the seating position, long stretches are now possible without any issues. Despite the rider-oriented design of this seat, it offers enough space for two people, and the contact between the rider and passenger is even improved by the one-piece construction!Last but not least, the GS gains an exclusive, individual appearance with this one-piece sports seat!The high-quality, multi-layer seat cover is equipped with a durable Fresh Touch surface coating. It noticeably reduces the surface temperature by reflecting infrared light radiation and provides a more pleasant, cooler feeling when sitting on a motorcycle parked in the sun.An additional, exclusive comfort gain that creates enthusiasm!The high-quality seat is delivered completely ready for installation and without any time loss due to reupholstering; no adjustments to the vehicle are necessary, and you can keep your original seat.Facts:- anatomically adapted contour developed in extensive riding tests in Germany- no sagging due to the use of a high-density foam produced in-house- even weight distribution, optimized vehicle contact, and perfect control- bi-elastic cover material with sealed seams- hollow groove in the center of the seat for tailbone relief- different heights available- optimally positioned seams to avoid pressure points in the seating area- suitable for long distances- highest quality materials and workmanship- made in Germany- the seat is waterproof- thanks to the Fresh Touch surface coating, up to 10°C temperature difference compared to the original seat coverHeight: 56 cmOriginal height BMW R1200GS (LC): 52/53.5 cmOriginal height BMW R1200GS Adventure (LC): 54/55.5 cmExplanations for measuring seat height can be found under "Additional Information"