Footpegs & Footpeg Lowering

Footpeg lowering kit adjustable for passenger for BMW R1150GS with original metal case in silver, not for Adventure model incl. ABE With the new footpeg adapter for your BMW, no wish remains unfulfilled. As diverse as its adjustment options are, so are its applications.The adapter in its basic form fits 98% of all motorcycle models.The optimal leg angle is 90°. A bent leg angle also bends the blood vessels, thus not supplying the leg with enough oxygen. This leads to the dreaded varicose veins.The adapter lowers the peg by 60 mm. Generally, the basic adapter can be mounted upwards or downwards.After installation, the adapters can be adjusted by 4° each, so that the footpeg is positioned vertically downwards. The passenger even has the advantage of being able to adjust the peg upwards if there is enough space available.Thus, the kit is, for example, the optimal addition for a motorcycle child seat. Here, the feet always fit on the pegs.Depending on the setting, the passenger achieves a healthy and comfortable leg position. The complete kit for both sides is delivered with side compensation depending on the model. This variant is slightly more expensive but necessary, as, for example, the exhaust must be bridged. As with all adjustable products, the footpeg adapter is characterized by its "quick" adjustability. With just a few hand movements and an Allen key, the adapter can be adjusted, for example, from "high to low".Please note that lowering the footpeg also means less lean angle.The advantage of the adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Adjustable Passenger Footpeg Lowering Kit for BMW R850GS, R1150GS with Original Plastic Cases in Silver including ABE With the new footpeg adapter for your BMW, no wish remains unfulfilled. As diverse as its adjustment options are, so are its applications. The adapter in its basic form fits 98% of all motorcycle models. The optimal leg angle is 90°. A bent leg angle also constricts the blood vessels, thus not supplying the leg with enough oxygen. This leads to the dreaded varicose veins.The adapter lowers the peg by 60 mm. In general, the basic adapter can be mounted upwards or downwards. After installation, the adapters can be adjusted by 4° each, so that the footpeg is positioned vertically downwards. The passenger even has the benefit of being able to adjust the peg upwards if there is enough space available. Thus, the kit is, for example, the optimal addition for a motorcycle child seat. Here, the feet always fit on the pegs. Depending on the setting, the passenger achieves a healthy and comfortable leg position. The complete kit for both sides is delivered with side compensation depending on the model. This variant is slightly more expensive but necessary, as, for example, the exhaust must be bridged. As with all adjustable products, the footpeg adapter is also characterized by its "quick" adjustability. With just a few hand movements and an Allen key, the adapter can be adjusted from "high to low".Please keep in mind that lowering the footpeg also means less lean angle. The advantage of the adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Footpeg Extension for All World TravelersThe footpeg plate widens your peg by 80 mm, allowing you to stand securely on your peg even while standing. It is quickly and easily screwed on and fits all BMW GS models.Scope of delivery: 2 pieces for left and rightAvailable in blue and black. All items have been mounted and tested on original motorcycles - without any modifications.

TOURATECH Fernreisefußrasten * Works *, low, for BMW R850GS, R1100GS, R1150GS, R1150GS Adventure, R1200GS + Adventure by 2012, R80GS, R100GS, F800GS, F700GS, F650GS (TWIN), F650GS, F650GS Dakar, G650GS, G650GS Sertao item Description  Touratech WORKS steel footrests. The best that Touratech has your boots to offer. Specially developed team according to the requirements of the Touratech works racing. The 52mm wide boots gentle 4mm thick stainless steel claw profile, with its special form the optimal combination of grip and self-cleaning. Due to the rounded edges the boot soles are not damaged, the open design ensures that mud and stones fall under the boots of the footrests and the boot profile has a secure hold on the catch. The slim design and taper to the outside of the ground clearance increased, which are especially when driving through deep ruts a great advantage compared to regular Enduro footrests or series products bietet.Die footrests 20 mm lower than the original notches (without rubber insert).  The Touratech Works foot pegs have been specially strengthened at the reception and are thus significantly less susceptible to impacts. Even the look of the Works products are a highlight. Blasted stainless steel with a special laser inscription records this product and shows visually the noble origins in extreme enduro Sport.- 52mm wide boots gentle 4mm thick stainless steel Krallenprofil- optimum combination of grip and Selbstreinigung- increased ground clearance by sleeker design significantly more resistant to Aufschläge- increased recording, finished with blasted surface and laser inscription Including car-specific reports according to § 19 STVZO.BMW F800GS: all years!

Spring Footpeg

Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide, boot-friendly, 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which offers a significant advantage when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving distinguishes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with a shot-blasted surface and laser engravingIncludes ABE.BMW F800GS: for all model years!