EBC Contour Brake Disc       The goal of the development is to improve the braking performance compared to the original brake disc. EBC uses heat-treated carbon steel for the MX Contour brake discs. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc layer, which wears off in the brake pad contact zone during the break-in process.  Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.       - Top current contour design - Rigid brake disc, super lightweight, completely new profile - Made from heat-treated carbon steel. - Brake surface drilled with optimized hole pattern. - Radially ground. - Galvanized for corrosion protection. - Unique design. - Thickness of the brake disc may vary compared to the original part.   MADE IN UKTechnical Data:Outer Diameter:   240 mmInner Diameter:   105.2 mmBolt Circle:   120 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   4.8 mmDesign:   rigid Manufacturer:   EBC

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout accuracy are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   240 mmInner Diameter:   105 mmBolt Circle:   120 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   4 mmDesign:   solid Manufacturer:   Brembo

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout accuracy are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   300 mmInner Diameter:   105 mmBolt Circle:   120 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   5 mmDesign:   fixed Manufacturer:   Brembo

EBC Contour Brake Disc       The goal of the development is to improve the braking performance compared to the original brake disc. EBC uses heat-treated carbon steel for the MX Contour brake discs. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc layer, which wears off in the brake pad contact zone during the bedding-in process.  Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.       - Top current contour design - Rigid brake disc, super lightweight, completely new profile - Made from heat-treated carbon steel. - Brake surface drilled with optimized hole pattern. - Radially ground. - Galvanized for corrosion protection. - Unique design. - Thickness of the brake disc may vary compared to the original part.   MADE IN UKTechnical Data:Outer Diameter:   300 mmInner Diameter:   105.2 mmBolt Circle:   120 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   4.5 mmDesign:   rigid Manufacturer:   EBC