BATTLAX-BT-46TOURING MOTORCYCLE TIRE   Further development of a legend with modern technology Improvements in all areas - even on wet roads Even wear  Technical Data:Width:   130 Aspect Ratio:   80 % of widthConstruction:   - (Bias tire) Rim Diameter:   17 inchesLoad Index:   65 Speed Index:   H -210 km/h Profile:   BT46 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: blue with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: gold with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

BMW F 650 700 800 GS G650X Country Challenge Moto Large Hand Protector Attachment 71607705964 These spoilers are mounted on the original BMW hand protectors. All mounting parts are included. Kit for right and left.

BMW Original Spare Part Air Filter Insert Top Brand Quality

Von der G 650 X bekanntes und bewährtes modulares System basierend auf Handschutzbügel, mit 3 Ausbaustufen. Wirkungsvoller Schutz für Hände und Armaturen im Gelände, vor Büschen, Sträuchern, aufgewirbelten Steinen und bei Stürzen. Effektiver Wind- und Wetterschutz vor allem beim großen Handschutz in Verbindung mit Aufsatzspoiler. Leichte Montage / Demontage. Bei diesem Angebot handelt es sich um die Kunststoffschalen. Die Metallbügel müssen separat bestellt werden.

Fork Retaining Ring Original Spare Part

BMC Replacement Air Filter   The acquired know-how from the racetracks is directly incorporated into the production of the series filters, to provide the demanding motorcyclist with a product that is tested, delivers performance, and is in a constant state of evolution.   The materials used are the best currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made from a special cotton fabric (4 layers), soaked in a low-tack oil.   It is encased in an aluminum mesh that is treated with an epoxy solution to resist gasoline vapors and oxidation. Additionally, the cotton has the advantage of being washable and reusable.   Due to these features, the BMC sport air filters (replacement air filters) guarantee a higher airflow compared to the original paper filters, a minimal pressure loss of the incoming air, and thus lead to better engine performance.   - Durability: washable and reusable, no replacement needed - Wider filter surface - Maximum air permeability (4 layers of cotton) - Higher absorption and filtration - Better pressure drop ratio - Tested by international testing procedures

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

BMW G650 Xcountry Xchallenge Engine guard black Engine guards - robust, shapely protection High-quality engine bars for individualists. Whether you are the most difficult terrain, on the highway or in the city move. The engine block of your motorcycle is always effectively protected from anything untoward. More than that: in a falling over or accidental contact with the ground they can protect the driver and the bike from a bigger damage. Also useful when lashing the motorcycle when Transport.Die guard Hepco & Becker the lines of the machine are characterized by perfect and give the bike an individual character. Made of Extremely sturdy tube-in-tube construction. Depending on the vehicle type chrome or plastic-coated Stahlrohr.Die Facts • Protects at Umfallern and falls, helpful when lashing the motorcycle • Vehicle-specific development, characterized • Stable tube-in-tube design • High-quality metal coating in black, anthracite Precision engineered, easy installation, silver or white or chrome finish. depending on the model. • Comprehensive, easy-to-follow installation instructions Model: G 650 X Challenge / 2007 -> / G 650 X Country

BMW G650 Xcounty Xchallenge Porter Lock it black ( Example Picture !!! ) Porter for all Hepco & Becker side cases. Excellent fit - each carrier is exactly on the respective type of motorcycle abgestimmt.Dadurch results in a perfect registration. When designing all of the model-specific features are wiez.B. Helmet and seat lock considered. Of plastic-coated steel tube, strengthened applies on exposed areas with a special inner tube ist.Für all products: Specially designed case for Hepco & Becker Metal pipe from a German steel forge with high quality powder coating Comprehensive, easy-to-follow installation instructions Side beams can be combined with the B & H luggage bridges or Aluracks / Easy racks. What makes the Lock it Side-makers is the possibility this to disassemble in seconds. The facts: • Especially for Hepco & Becker cases and bags designed • Cases and carriers in one -no extra costs for additional adapters • Metal pipes manufactured by German steel forge with high quality chrome plating or plastic coating • Comprehensive, easy-to-follow installation instructions • side supports can with the H & B luggage rack or Aluracks combined werden.Für suited all Hepco & Becker luggage! Model: G 650 X Challenge / 2007 -> / G 650 X Country /

BMW G650 Xcountry Xchallenge Luggage rack black Proven luggage rack in pipe construction for Hepco & Becker topaz highest Qualität.Hepco & Becker luggage racks are specially designed for our topaz. You can use it every top case of us, whether aluminum or plastic, mounted on this carrier and thus have large selection of different combinations. But not only newly purchased, even existing Hepco & Becker top boxes passen.Alles what you need to mount the luggage rack of your bike is of course included enthalten.Jeder carrier is specially designed for the appropriate motorcycle and produced. Thanks to the construction of German quality steel, Hepco & Becker luggage racks ensure maximum stiffness and very high security. The high-quality metal coating, the look is also maintained in the long term. The facts: • highest safety - especially developed for Hepco & Becker top case designed • Vehicle Development • Robust and elegant design • Precision fit, easy installation • Rotating attachment for luggage straps • metal pipe from a German steel forge • High-quality metal coating • Comprehensive, easy-to-understand AnbauleitungNur for Hepco & Becker top boxes, not suitable for hand luggage! Vehicle-specific information: The luggage rack is mounted on the original bridge. Model: G 650 X Challenge / 2007 -> / G 650 X Country

The JT Sprockets manufacturing facility is today the largest and most modern production site for sprockets and chainwheels worldwide, equipped among other things with the latest generation of CNC manufacturing machines.JT Sprockets produces the entire range of sprockets and chainwheels for the aftermarket and original equipment. Each sprocket and chainwheel goes through 25 production stages and is subjected to more than ten individual quality checks to successfully leave the production line. JT Sprockets manufactures in the right way: through turning, milling, and drilling! This is the only way to achieve the highest quality with the lowest tolerances and the best tooth profile.After the subsequent heat treatment, each item is manually inspected - thus, JT Sprockets sets new quality standards in the motorcycle industry.Technical Data:Pitch: 520 Inner Diameter: 136 mmBolt Circle: 154 mmDrilling: 8.5 mmNumber of Holes: 6 Screw Type: Flat Head Number of Teeth: 47 Sprocket Type: Steel Manufacturer: JT

Product Description: original BMW workshop equipment Contents 50 ml 29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For professional users only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout accuracy are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   240 mmInner Diameter:   105 mmBolt Circle:   120 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   4 mmDesign:   solid Manufacturer:   Brembo

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

The Dual Injector offers several advantages, as the Scorpion Dual Injector is mounted using a flexible multi-dispenser plate and can thus be individually adhered to all swingarm shapes. Optionally, the injector can also be directly screwed onto chain guides, swingarms, and much more. The robust and shock-absorbing plastic reinforcement around both nozzles inevitably directs every drop of oil to the chain / sprocket. Additionally, the precise dosing extends the refill intervals.The double nozzle can be retrofitted to any already installed system.- optimal lubrication on both sides of the chain- saves oil and increases wear protection- easy and flexible installation- perfect fit for the new multi-dispenser plate- optimally adjustable through individual, detachable sections- compatible with all Scottoiler systems

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.