Fork

Seal kit with dust caps from All Balls Racing - better breakaway torque and up to 3x lower friction than OE seals- Patented Max-Life manufacturing, which increases lifespan by 3-4 times- Seals are triple sealed- Dust caps are coated with a special grease to improve responsiveness

These continuously progressive fork springs and the matching rebound springs are perfectly tuned to the original fork of the Harley Davidson FLTRX SE CVO Road Glide with a 21-inch front wheel. They provide the fork with the best possible tuning and optimal front wheel guidance. BLACK-T High End Suspension Fork Springs offer significantly improved responsiveness and higher reserves in the limit range. Info: Fits only for the original fork of the “Harley Davidson FLTRX SE CVO Road Glide (2018-2022)” with a 21-inch front wheel For all suspension solutions, both the rear and front areas of the motorcycle should be adjusted. - When replacing only one component, optimal handling is not achieved. - You can find the matching components for the motorcycle in the accessories of this item. “Please scroll down” Our recommendation: Have the conversion carried out by a specialist workshop. Scope of delivery: - Replacement springs for the original fork. - 1 set of rebound springs (must also be replaced) - Suitable fork oil. - Paste to improve the sliding properties of the inner tubes. - Including detailed installation instructions. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These continuously progressive fork springs are perfectly tuned to the original fork of the Indian Scout 1200 . They provide the fork with the best possible tuning and optimal front wheel guidance. BLACK-T High End Suspension Fork Springs offer significantly improved responsiveness and higher reserves in the limit range. Info: Fits only for the original fork of the “Indian Scout 1200 (2018-2021)“ For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - When replacing only one component, optimal handling is not achieved. - You can find the matching components for the motorcycle in the accessories of this item. “Please scroll down” Our recommendation: Have the conversion carried out by a specialist workshop. Scope of delivery: - Replacement springs for the original fork. - Suitable fork oil. - Paste to improve the sliding properties of the inner tubes. - Including detailed installation instructions. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These continuously progressive fork springs are perfectly tuned to the original fork of the Indian Scout . They provide the fork with the best possible tuning and optimal front wheel guidance. BLACK-T High End Suspension Fork Springs offer significantly improved responsiveness and higher reserves in the limit range. Info: Fits only for the original fork of the “Indian Scout 2015-2016” For all suspension solutions, both the rear and front areas of the motorcycle should be adjusted. - When replacing only one component, optimal handling will not be achieved. - You can find the matching components for the motorcycle in the accessories of this item. “Please scroll down” Our recommendation: Have the conversion carried out by a specialist workshop. Scope of delivery: - Replacement springs for the original fork. - Suitable fork oil. - Paste to improve the sliding properties of the inner tubes. - Including detailed installation instructions. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These continuously progressive fork springs are perfectly tuned to the original fork of the Indian Scout Bobber . They provide the fork with the best possible tuning and optimal front wheel guidance. BLACK-T High End Suspension Fork Springs offer significantly improved responsiveness and higher reserves in the limit range.   Info: Fits only for the original fork of the “Indian Scout Bobber (2018-2021)“   For all suspension solutions, both the rear and front areas of the motorcycle should be adjusted. - When replacing only one component, optimal handling is not achieved. - You can find the matching components for the motorcycle in the accessories of this item.   “Please scroll down”   Our recommendation: Have the conversion carried out by a specialist workshop.   Scope of delivery: - Replacement springs for the original fork. - Suitable fork oil. - Paste to improve the sliding properties of the inner tubes. - Including detailed installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

Diese stufenlos progressiven Gabelfedern sind perfekt auf die original Gabel abgestimmt. Sie verleihen der Gabel die bestmögliche Abstimmung und die optimale Vorderradführung. BLACK-T High End Suspension Gabelfedern bringen ein deutlich verbessertes Ansprechverhalten und höhere Reserven im Grenzbereich.  Info: Passt nur für die Original-Gabel der „Triumph Bonneville Bobber (2017-)“ Bei allen Fahrwerkslösungen sollten Heck- und Frontbereich des Motorrades angepasst werden. - Beim Austausch nur einer Komponente, wird kein optimales Fahrverhalten erzielt. - Die passenden Komponenten für Motorrad finden sie im Zubehör dieses Artikels.   „Bitte nach unten scrollen“ Unserer Empfehlung: Lassen sie den Umbau von einer Fachwerkstatt durchführen. Lieferumfang: - Austauschfedern für die Original Gabel. - passendes Gabelöl. - Paste zur Verbesserung der Gleitfähigkeit der Tauchrohre. - inklusive ausführlicher Anbauanleitung.

A lowering of the front with fork springs from Black-T Suspension. With this spring set, you achieve a sensible lowering of -30mm without compromising the riding characteristics. Of course, some ground clearance is lost. The continuously progressive springs are perfectly tuned to the Indian FTR 1200 / FTR 1200 S and offer significantly improved responsiveness and higher safety in the limit range compared to the original fork springs.   Info: Fits only for “Indian FTR 1200 / FTR 1200 S (2019-2021)“   For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - When replacing only one component, optimal riding behavior is not achieved. - You can find the matching components for your Indian FTR 1200 / FTR 1200 S in the accessories of this item. “Please scroll down”   Delivery includes: - Fork springs -30mm - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. - Installation instructions with setup information,   Our recommendation: Have the conversion carried out by a specialist workshop.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the BMW RnineT Pure. The shock absorber and the fork have a better setup for the demands of motorcycle touring. BLACK-T High End Suspension Components provide a significantly improved response and higher reserves in the limit range. Info: Fits only for “BMW RnineT Pure from 2017” Scope of delivery:- Replacement spring for the original shock absorber.- Replacement spring for the original fork.- Suitable fork oil.- Paste to improve the sliding properties of the inner tubes.- Including detailed installation instructions. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the FTR 1200 / FTR 1200 S model. The shock absorber and the fork have a better setup for the demands of motorcycle touring. BLACK-T High End Suspension Components provide significantly improved responsiveness and higher reserves in the limit range.   Info: Fits only for “FTR 1200 / FTR 1200 S (2019-2021)“   Scope of delivery: - Replacement spring for the original shock absorber. - Replacement spring for the original fork. - Suitable fork oil. - Paste to improve the sliding properties of the inner tubes. - Includes detailed installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.

Fork Tubes by JMP   - made from high-quality raw materials - special chrome coating with low breakaway torque - each fork tube undergoes a quality inspection before delivery - manufactured on state-of-the-art CNC machines in Central EuropeTechnical Data:Upside down:   No Outer diameter:   41 mmInner diameter:   35.7 mmLength:   720 mmTop connection:   Internal thread Bottom connection:   No thread Thread:   37 x 1.5 Color:   chrome

Fork Retaining Ring Original Spare Part

Seal kit with dust caps from All Balls Racing - better breakaway torque and up to 3x lower friction than OE seals- Patented Max-Life manufacturing, which increases lifespan by 3-4 times- Seals are triple sealed- Dust caps are coated with a special grease to improve responsiveness

Fork Tubes by JMP   - made from high-quality raw materials - special chrome coating with low breakaway torque - each fork tube undergoes a quality inspection before delivery - manufactured on state-of-the-art CNC machines in Central EuropeTechnical Data:Upside down:   No Outer diameter:   41.65 mmInner diameter:   35 mmLength:   646 mmTop connection:   Internal thread Bottom connection:   No thread Thread:   38 x 1.5 Color:   chrome

Dust caps from All Balls Racing - better breakaway torque and lower friction due to special grease coatingTechnical Data:Inner Diameter: 42 mmOuter Diameter: 60 mmInstallation Height: 34.75 mmTotal Height: 3475 mmManufacturer: All Balls Racing

Dust caps from All Balls Racing   - better breakaway torque and lower friction due to special grease coating    Technical Data:Inner diameter:   41 mmOuter diameter:   54.4 mmInstallation height:   12.5 mmTotal height:   12.5 mmManufacturer:   All Balls Racing

Progressively wound fork springs from YSS in a firmer design than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type:   Progressive Length:   530 mmDiameter 1:   33.5 mmSpring Rate 1:   6.5 N/mmSpring Rate 2:   8.5 N/mmAir Chamber Left:   170 mmAir Chamber Right:   170 mmRecommended Viscosity:   15W Manufacturer:   YSS

Outer diameter 31mm Diameter for piston bore in the fork: 24mm Total height of the valve: 16mm   YSS fork valves transform a conventional fork into a controlled feeling with improved road contact. CAD designed and made from extremely lightweight 6061 T6 aluminum hardened to 65 Rockwell. Finely adjustable and usable for almost all fork diameters. Through a sophisticated system of holes in the valve, the oil flow in the fork is altered so that road contact and feedback become significantly more direct. The rider gains safety and a better feel for the road surface. Application range: On-road, off-road, racing, and touring applications.   The fork valves come pre-adjusted for the respective fork diameters. Subsequent fine-tuning can be done by adjusting the oil quantity or using different oil viscosities.   Operating principle: The YSS fork valve is installed between the piston rod and the fork spring. It is important to know the inner diameter of the dive tube and the bore in the piston rod beforehand. The fine-tuning of the fork valve is possible with little effort after installation: The fork bridge must be loosened, the oil drawn from the fork, and the fork valve lifted out from above. Then, using an Allen key, the adjustment screw can be tightened or loosened in increments of 2 turns. Please keep in mind to first turn the upper screw and then tighten with the lower lock nut.

Progressively wound fork springs from YSS in a firmer design than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type: Progressive Length: 560 mmDiameter 1: 32 mmSpring Rate 1: 5.7 N/mmSpring Rate 2: 8.7 N/mmAir Chamber Left: 170 mmAir Chamber Right: 170 mmRecommended Viscosity: 15W Manufacturer: YSS

Vehicle-Specific Information:  Attention: The oil viscosity is 7.5W.Progressively wound fork springs from YSS, designed to be stiffer than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type:   Progressive Length:   600 mmDiameter 1:   33 mmSpring Rate 1:   5 N/mmSpring Rate 2:   8 N/mmAir Chamber Left:   160 mmAir Chamber Right:   160 mmManufacturer:   YSS

Progressively wound fork springs from YSS in a firmer design than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type: Progressive Length: 545 mmDiameter 1: 26.5 mmSpring Rate 1: 5.5 N/mmSpring Rate 2: 7 N/mmAir Chamber Left: 150 mmAir Chamber Right: 150 mmRecommended Viscosity: 10W Manufacturer: YSS

Dust caps from All Balls Racing - better breakaway torque and lower friction due to special grease coating

Progressively wound fork springs from YSS in a firmer design than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type:   Progressive Length:   510 mmDiameter 1:   26.5 mmSpring Rate 1:   4.5 N/mmSpring Rate 2:   6 N/mmAir Chamber Left:   120 mmAir Chamber Right:   120 mmRecommended Viscosity:   10W Manufacturer:   YSS

Fork Retaining Ring Original Spare Part

Seal kit with dust caps from All Balls Racing - better breakaway torque and up to 3x lower friction than OE seals- Patented Max-Life manufacturing, which increases lifespan by 3-4 times- Seals are triple sealed- Dust caps are coated with a special grease to improve responsiveness