Brake Pads & Brake Discs

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: blue with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

Bleed Screw

  EBC Brake Discs. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc coating, which wears off in the brake pad contact zone during the bedding-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Rigid brake disc. - Made from rolled HPSR steel with low carbon content. - Brake surface drilled with an optimized hole pattern. - Radially ground. - Zinc-coated for corrosion protection. - EBC recommends EBC Organic brake pads or for sporty riders EBC Double-H sintered brake pads. - Standalone design. Technical Data:Outer Diameter:   265 mmInner Diameter:   137.2 mmBolt Circle:   160 mmNumber of Holes:   5 Hole Diameter:   10.5 mmThickness:   5 mmDesign:   rigid Manufacturer:   EBC

Bleed Screw JMP Bolt   Made from 316 stainless steel, which offers the following advantages:   - excellent strength - outstanding corrosion resistance - high resistance to acids   The offered stainless steel screws are all polished to a high gloss.     Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.    

Bleed Screw JMP Bolt   Made from 316 stainless steel, which offers the following advantages:   - excellent strength - outstanding corrosion resistance - high resistance to acids   The offered stainless steel screws are all polished to a high gloss.     Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.  

Brake Caliper Piston Repair Kit

Brake Caliper Piston Repair Kit

SP Sintered Metal Brake Pads for Rear (SP) A sintered mixture specifically designed for rear wheel brakes (SP) that offers improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

LA Sintermetall Longlife Street Brake Pad for Front   A brake pad designed for longevity. It is characterized by excellent efficiency in all areas of use.

Dank des Einsatzes von hochwertigen Werkstoffen bieten die schwimmend gelagerten Scheiben hervorragende Leistungen.Sie bestehen aus einem Edelstahl-Reibring und einem Bremstopf aus CNC-bearbeiteter Aluminiumlegierung, der mit zehn Mitnehmerzapfen verbunden und dann eloxiert wurde.

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

All brake discs come with an ABE, also for scooters. The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts. All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel. The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads. A uniform temperature rise and fall allows for a constant pressure point. The floating brake discs have titanium-colored anodized, machined aluminum inner rings.Floating discs do not rattle, as the high-quality stainless steel floaters are tensioned with well discs. A new special alloy prevents excessive corrosion.Laser technology enables a lightweight design with fine contours. Each brake disc can be individually paired with brake pads from the TRW-Lucas range.TRW-Lucas floating brake disc Allround - Round outer contour with perforated brake edge- Available in rigid and floating variants- Coordinated design from front to rear axle Technical Data:Outer Diameter: 300 mmInner Diameter: 105.3 mmBolt Circle: 120 mmNumber of Holes: 6 Hole Diameter: 6.5 mmThickness: 5 mmDesign: floating Manufacturer: TRW

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout accuracy are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   300 mmInner Diameter:   105 mmBolt Circle:   120 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   5 mmDesign:   fixed Manufacturer:   Brembo

SA Sintered Metal Front Brake Pads (SA) A sintered mixture specifically designed for front wheel brakes, providing improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

Especially when riding off-road, it is extremely important to always have a secure footing on the brake. With our enlarged support, the boot always finds its way to the lever, and the controllability is noticeably improved.Material: high-quality stainless steelBMW F800GS: for all model years!

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: black with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt