Engine protection & engine accessories

Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the appearance of your motorcycle, but also emphasize the off-road look. effective protection against stone chips and run-overs high-quality technical workmanship made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, adapted to the shape of the motorcycle including mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the visual appeal of your motorcycle but also emphasize the off-road look. effective protection against stone chips and runovers high-quality technical processing made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, adapted to the shape of the motorcycle includes mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

ABE in preparation The Carbon fuel injector cover for the BMW R 1300 GS gives your motorcycle a unique. sporty-luxurious look. The high-quality carbon component is mounted directly on the cylinders of the boxer engine and is therefore clearly visible. The striking. exposed position of the carbon part emphasizes the noble appearance of your motorcycle and gives it a personal touch. The name Ilmberger stands for highest quality and innovation in carbon fiber manufacturing. Each part is produced in our own facility. where we use specially developed prepreg for Ilmberger as the base material. This is processed in an elaborate procedure in the autoclave. which offers numerous advantages.Prepreg. a pre-impregnated carbon fabric. is characterized by an even resin distribution with a simultaneously high fiber volume content. This leads to maximum strength and increases the flexibility of the components. Processing in the autoclave. a high-pressure oven that operates under controlled temperature and pressure conditions. ensures perfect. uniform curing and a flawless surface. This method prevents air inclusions in the material and ensures consistently high quality of the parts.Our carbon parts are laminated by hand with great experience and care. allowing for consistent fiber alignment without distortion. After curing in the autoclave. the edges of the parts are precisely cut by robot to ensure a perfect fit and highest quality.A globally unique step in Ilmberger's production is the complete plastic powder coating of all carbon parts. This coating not only protects the parts from environmental influences but also gives them an incomparable depth effect. No other carbon manufacturer offers this type of sealing. which prevents the aging of the parts and significantly extends their lifespan. More information about the plastic powder coating can be found here.The final clear coat layer on this component is high-gloss and ensures a perfect. smooth surface that further emphasizes the luxurious-sporty look of our carbon parts. Each part that leaves our production is a masterpiece of technology and design that meets the highest standards.Ilmberger is not only a leading manufacturer of carbon parts for the aftermarket but also a recognized OEM producer for renowned manufacturers such as Ducati and BMW. Among other things. we manufacture parts for BMW in the World Superbike Championship (WSBK). as well as for the BMW factory team in the Endurance World Championship (EWC). where our parts are regularly put to the test under the toughest conditions. The expertise gained from this flows into each of our products. improving every single component. The expertise gained from this flows into each of our products. improving every single component.The facts: Production in our own facility according to ISO 9001 Including ABE - Part is legal to use on the street Use of prepreg specially developed for Ilmberger Manufacturing in autoclave for maximum strength and perfect surfaces Unique plastic powder coating for protection and a special depth effect Hand lamination by experts with years of experience Precise edge cutting by robot High-gloss clear coat layer for a flawless surface No aging of parts thanks to multi-layer protection against UV light Delivery in ready-to-install condition TÜV-certified quality

Motorschutz-Verlängerung vorneDie Motorschutz-Verlängerung schützt den vorderen Bereich des Motorblocks vor Steinschlag. Der Protektor aus gebürstetem und pulverbeschichtetem Aluminium kann nur montiert werden, wenn der SW-MOTECH Motorschutz ebenfalls montiert ist.Lieferumfang1 x Motorschutz-Verlängerung vorneMontagematerialDetailsMaterial: Aluminium / AluminiumOberfläche: gebürstet / pulverbeschichtetFarbe: silbernGesamtgewicht: ca. 0,4 kgFür Montage erforderlichDer SW-MOTECH Motorschutz muss montiert sein.

Der Zylinderkopfhaubenschutz aus Edelstahl schützt die Zylinderkopfhaube vor Kratzern und Steinschlägen. Zusätzlich ist er innen mit einem großflächigen Gummipuffer ausgestattet. Optisch ist der Zylinderkopfhaubenschutz perfekt auf das Design und die Linie des Boxermotors abgestimmt. Schutz der Zylinderkopfhaube vor Kratzern und Steinschlägen Optische Aufwertung und Veredlung  

ABE in preparation The Ilmberger Carbon Lower Engine Guard for the BMW R 1300 GS is the perfect upgrade for those who value optimal protection and a sporty-luxurious look. Thanks to experiences from trialsport. this engine guard offers the highest level of safety and reliability. The lightweight carbon material ensures maximum protection and gives your motorcycle an breathtaking look at the same time. Trust in the quality of Ilmberger Carbon and take your BMW R 1300 GS to a new level.The name Ilmberger stands for highest quality and innovation in carbon fiber manufacturing. Each part is produced in our own facility. where we use specially developed prepreg for Ilmberger as the base material. This is processed in an elaborate procedure in the autoclave. which offers numerous advantages.Prepreg. a pre-impregnated carbon fabric. is characterized by an even resin distribution with a simultaneously high fiber volume content. This leads to maximum strength and increases the flexibility of the components. Processing in the autoclave. a high-pressure oven that operates under controlled temperature and pressure conditions. ensures perfect. uniform curing and a flawless surface. This method prevents air inclusions in the material and ensures consistently high quality of the parts.Our carbon parts are laminated by hand with great experience and care. allowing for consistent fiber alignment without distortion. After curing in the autoclave. the edges of the parts are precisely cut by robot to ensure a perfect fit and highest quality.A globally unique step in Ilmberger's production is the complete plastic powder coating of all carbon parts. This coating not only protects the parts from environmental influences but also gives them an incomparable depth effect. No other carbon manufacturer offers this type of sealing. which prevents the aging of the parts and significantly extends their lifespan. More information about the plastic powder coating can be found here.The final clear coat layer on this component is high-gloss and ensures a perfect. smooth surface that further emphasizes the luxurious-sporty look of our carbon parts. Each part that leaves our production is a masterpiece of technology and design that meets the highest standards.Ilmberger is not only a leading manufacturer of carbon parts for the aftermarket but also a recognized OEM producer for renowned manufacturers such as Ducati and BMW. Among other things. we manufacture parts for BMW in the World Superbike Championship (WSBK). as well as for the BMW factory team in the Endurance World Championship (EWC). where our parts are regularly put to the test under the toughest conditions. The expertise gained from this flows into each of our products. improving every single component. The expertise gained from this flows into each of our products. improving every single component.The facts: Production in our own facility according to ISO 9001 Including ABE - Part is legal to use on the street Use of prepreg specially developed for Ilmberger Manufacturing in autoclave for maximum strength and perfect surfaces Unique plastic powder coating for protection and a special depth effect Hand lamination by experts with years of experience Precise edge cutting by robot High-gloss clear coat layer for a flawless surface No aging of parts thanks to multi-layer protection against UV light Delivery in ready-to-install condition TÜV-certified quality