SKF Fork Seal + Dust Cap WP43 suitable for BMW F800GS + Adventure from 2013
Product information "SKF Fork Seal + Dust Cap WP43 suitable for BMW F800GS + Adventure from 2013"
Simmerring and Dust Cap from SKF:
- Less friction (approx. -20%) compared to conventional sealing rings
- Use of a self-lubricating material
- Less stick-slip
- (Stick-slip = breakaway force caused by static friction)
- Significantly improved sealing effect
- Less air entry into the fork
- Less dirt entry into the fork
- thus less wear on sliding bushings and oil
- thus maintaining the optimal sliding properties of the fork
- Increased long-term tightness
- Excellent water, dirt, and air tightness. UV resistant
Dimensions:
Fork sealing ring Ø43 x 52.9 x 9.5mm /
Wiper Ø43 x 53.4 x 5.8 mm
Scope of delivery:
1 piece sealing ring
1 piece dust cap
(Two sets are required for a complete fork)
| Baugruppe: | Front Axle / Fork |
|---|---|
| Marke: | BMW |
| Modell: | F800GS, F800GS Adventure |
Login
Accessory Items
These progressive replacement springs are perfectly tuned to the fork and shock absorber of the BMW F850GS/Adventure. The shock absorber and the fork have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for * BMW F850GS/Adventure from 2018*The replacement springs can be used with or without ESA equipment.Delivery includes: detailed installation instructions.Our recommendation: Have the conversion carried out by a specialist workshop.Do you have further questions? We are happy to advise you personally, please contact us
These progressive replacement springs are perfectly matched to the fork and shock absorber of the BMW F800GS. The shock absorber and the fork provide a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.The replacement springs can be used with or without ESA equipment.Delivery includes: detailed installation instructions.Our recommendation: Have the conversion carried out by a specialist workshop.
These progressive fork springs are perfectly tuned to the requirements of the fork for the BMW F800GS. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for *BMW F800GS from 2013*The fork springs can be used with or without ESA equipment.For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> When replacing only one component, optimal handling is not achieved.Do you have further questions? We are happy to advise you personally, please contact usDelivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the glide properties of the fork tubes.