Touratech Suspension Replacement Springs for BMW R100GS (PARIS DAKAR) 1988 - 1995

The Level 2 Shock Absorber is the right choice for long-distance and touring use for the BMW R100GS/PD & R80GS. This type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic preload adjustment, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly restored by hand via the hydraulic preload adjustment. The damping adjustment of this Level 2 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the BMW R100GS/PD & R80GS.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the BMW R100GS/PD & R80GS is:=> Progressive fork springs, BMW R80/100GS Part No. 01-040-7413-0=> Progressive fork springs, BMW R100GS Paris Dakar Part No. 01-040-7414-0Replacing only one component will not achieve optimal handling.A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle. Features of the Touratech Suspension Level 2 Shock Absorber:=> The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => Special, low-friction seals are installed.*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> All components are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech.*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** Finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, tracks). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> Hydraulic high-end preload adjustment via a conveniently positioned handwheel. => QR code on the shock absorber with individual shock absorber information.*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings. The basic setup installed here is tuned for riders up to 100kg including travel luggage. Adjustmentsfor higher rider weights (more than 100kg) and/or for predominantly passenger operation / with travel luggage arepossible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us

These progressive fork springs are perfectly tuned to the requirements of the fork for the BMW R100GS. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for * BMW R100GS / R80GS Basic *For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the BMW R100GS are:=> Touratech Suspension Shock Absorber *rear* for BMW R100GS/PD & R80GS type *Level2* 01-058-0007-0=> When replacing only one component, optimal handling will not be achieved.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the glide properties of the fork tubes.

Dieses Federbein ist bei normalem Tourenbetrieb für die BMW R100GS/PD & R80GS die richtige Wahl. Der Federbein-Typ bietet einen großen Einstellbereich und hohe Reserven für die Anforderungen des Motorradreisens. Die Trennkolben-Bauweise und die fein justierbare Dämpfung ermöglichen eine treffendere Anpassung und Balance als dies bei den Serienkomponenten der Motorradhersteller möglich ist. Die Federvorspannung kann zur Beladungsanpassung auf das große Reisegepäck per Einstellwerkzeug justiert werden. Die Dämpfungseinstellung dieses Level1-Federbeins erlaubt die nötige Einflussnahme auf die Zug- und Druckstufe, um am Federbein Ihre individuellen Anforderungen an den Fahrkomfort umzusetzen. Wichtiges in Kürze:=> Das Federbein ist auf Basis unserer Erfahrungen für die BMW R100GS/PD & R80GS konfiguriert und fahrfertig eingestellt.=> Parameter sind: Fahrzeuggewicht / Anlenkung des Federbeins / bauliche Gegebenheiten / Testfahrten.=> Das hier genannte Federbein ist für ein Fahrergewicht bis 100kg inklusive Reisegepäck ausgelegt.=> Bei allen Fahrwerkslösungen sollten Heck- und Frontbereich des Motorrades angepasst werden.=> Die passende Komponente für die Front der BMW R100GS/PD & R80GS ist:=> Progressive Gabelfedern, BMW R100GS 01-040-7413-0=> Progressive Gabelfedern, BMW R100GS PD 01-040-7414-0=> Progressive Gabelfedern, BMW R80GS 01-040-7428-0=> Beim Austausch nur einer Komponente, wird kein optimales Fahrverhalten erzielt.Die hier verbaute Ausstattung mit ihren Einstellmöglichkeiten ist ausreichend, wenn das Fahrwerk nur selten auf unterschiedliche Beladungszustände angepasst werden muss.Eigenschaften des Touratech Suspension Level1 Federbeins:=> Das Federbeingehäuse ist aus Aluminium gefertigt. *** Dadurch geringst mögliches Gewicht. => Es sind spezielle, reibungsarme Dichtungen verbaut.*** Dadurch sehr geringer Verschleiß und lange Lebensdauer des Federbeins.=> Im Federbeinauge sind stabile Edelstahlbuchsen für die Befestigungsschrauben verbaut. *** Dadurch stabiler, spielfreier Sitz der Befestigungsschraube auch bei höchsten Belastungen.=> Alle Bauteile und Komponenten sind auf intensiven Einsatz mit schweren Reisemotorrädern ausgelegt. => Die Dämpfereinstellungen wurden aufgrund der Erfahrungen und Anforderungen von Touratech entwickelt.*** Basis sind viele Reisekilometer und die Erfahrungen aus den Einsätzen des Touratech Race-Teams.=> Trennkolben-Bauweise. Dadurch können die Dämpfungsflüssigkeiten Öl und Stickstoff getrennt wirken.*** Feineres Ansprechen des Federbeins. *** Hohe, präzise Dämpfungsleistung auch bei sehr hoher Dämpfungsfrequenz (schlechte Straßen, Piste). *** Bessere Kühlung des Federbeins. *** Geringste Einschränkungen bei der Einbaulage des Federbeins im Motorrad.=> QR-Barcode auf dem Federbein mit den individuellen Federbein-Informationen.*** Dadurch einfaches Abrufen der federbeinspezifischen Infos durch Abscannen mit dem Smartphone.*** Immer Infos zur Grundeinstellung des Federbeins abrufbar. Reset bei falscher Einstellung möglich. Sollten Sie an Ihrem Motorrad einen größeren Tank als den Originaltank verbaut oder Umbauten zur zusätzlichenGepäckunterbringung an Ihrem Motorrad vorgenommen haben, sind Anpassungen möglich. Das Federbein wird dann von uns durch eine Feder mit höherer Federrate individuell an Ihre Bedürfnisse angepasst. Bitte nutzen Sie dafür unseren Fahrwerkscheck-Bogen und senden Sie uns das Formular ausgefüllt zu. Sie haben weitere Fragen? Wir beraten Sie gern persönlich kontaktieren sie uns

The Touratech Suspension Extreme Shock Absorber represents the absolute premium class in suspension technology. This Extreme Shock Absorber for the BMW R100GS/PD & R80GS is perfectly designed for touring and riding operations with frequently and heavily changing loads and riding conditions or extreme demands. The Extreme Shock Absorber features PDS, a hydraulic bottoming protection achieved by using a second damping piston. Even under the most extreme trail conditions with full luggage, there is no bottoming out, preventing mechanical overload of the shock absorber. The damping operates based on the travel. In the predominant riding operation, the shock absorber is comfortably and power-saving adjusted, before the PDS engages in the last part of the shock absorber's travel.This means for you: Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the Extreme adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for an effective, precise, and personalized suspension setting for any road condition and purpose, whether on highways, federal roads, small country roads, off-road sections, long-distance travel with large luggage, or spirited, ambitious riding style.You will experience a completely new riding sensation with your motorcycle.Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the BMW R100GS/PD & R80GS.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100 kg including travel luggage.Features of the Touratech Suspension Extreme Shock Absorber:=> The shock absorber housing is made of aluminum. This results in the lowest possible weight.=> All components and parts are designed for intensive use with heavy touring motorcycles.=> Special, low-friction seals are used. This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings are installed in the shock eye for the mounting screws. This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.=> This results in finer response of the shock absorber,=> high, precise damping performance even at very high damping frequencies (poor roads, trails),=> better cooling of the shock absorber.=> Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> Hydraulic "Extreme" preload adjustment via a conveniently positioned hand wheel.=> The damping settings were developed based on the experiences and requirements of Touratech. The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> "Extreme" compression damping adjustment is always separately adjustable in high speed and low speed. This allows for very individual adjustment of the compression/rebound stage. Ideal adaptation to changing requirements.=> Separate "Extreme" reservoir in the damping group of the shock absorber. This results in better cooling of the damping during operation. This leads to higher load capacity and longer lifespan of the shock absorber.=> QR code on the shock absorber with individual shock absorber information. This allows for easy retrieval of shock-specific information by scanning with a smartphone. Information on the basic setting of the shock absorber is always retrievable. Reset possible in case of incorrect settings. The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form.Do you have further questions? We are happy to advise you personally, please contact us.

Touratech Suspension E1 Mono Shock Absorber for BMW R 100 GS, R 100 GS (PARIS DAKAR) 1986 - 1997 The E1 product line from Touratech Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the respective motorcycle after extensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – E1 shock absorbers provide a completely new experience of ride dynamics, safety, and precision. The Facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, white coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Touratech Suspension E1 shock absorber - Adjustment tool - ABE documents (online) - Installation instructions We recommend having the installation and removal of the shock absorber done by a professional workshop. Tip: Only a suspension upgrade of both the rear and front of the motorcycle achieves optimal ride dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.