Touratech Suspension Lowering -30mm for BMW R1200GS 2006 - 2012
Product information "Touratech Suspension Lowering -30mm for BMW R1200GS 2006 - 2012"
for BMW R 1200 GS 2006 - 2012
The Touratech Suspension Lowering Kit. The set includes replacement springs for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.
Scope of delivery:
- Replacement spring for original front shock absorber
- Replacement spring for original rear shock absorber
- including installation instructions
Our recommendation: Have the conversion carried out by a specialist workshop.
Info: The side stand and main stand may need to be adjusted in length.
Do you have further questions?
We are happy to advise you personally, please contact us.
Email: [email protected] Phone +49 (0)7728-9279-1555
Please use our suspension check form and send us the completed form.
Login
Accessory Items
The Touratech Suspension *CSC* Steering Damper effectively optimizes the riding stability of the BMW R1200 GS / Adventure, whether in off-road and touring operations with high loads or during cornering. We experience that the linear Touratech Suspension *CSC* (Constant Safety Control) steering damper, with its permanently supportive effect, opens up completely new riding dimensions.Depending on "individual requirements," the damping can be finely adjusted to the riding conditions over 24 clicks. Noticeable improvement in riding dynamics, even with high loads in travel trim, on long distances, on the worst roads, and/or on trails. The motorcycle can be maneuvered with the *CSC* steering damper significantly more stably, with less fatigue, and more safely.The following influences are significantly minimized:- No more strong steering input when cornering slowly with high loads.- Minimization of disturbances transmitted to the handlebars by the rider.- Example: Wind hitting the motorcycle clothing and disturbances caused by a truck or van ahead.- Minimization of disturbances from ruts on highways, country roads, and also trails.- Small front wheel with knobby tires during trail or sand riding is noticeably stabilized.- Less fatigue on long distances due to permanently higher riding stability.Features:- Touratech Suspension *CSC* steering damper for BMW R1200 GS / Adventure up to model year 2012 - Complete with the appropriate mounting kit for the motorcycle. - Made from high-quality aircraft aluminum 7075, CNC machined. - Characterized by sensitive response behavior- Maximum safety. Thus, it is perfectly suitable for "Offroad & Road." - Elegant Touratech design - Adjustable 24-click damping - With ABE - 75 mm strokeScope of delivery: - Touratech Suspension *CSC* steering damper - Suitable mounting kit for the BMW R1200GS / Adventure.- Installation instructions
Similar Items
These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS. The front and rear shock absorbers thus have a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS with Showa original shock absorbers *Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be done by a professional workshop.Scope of delivery:- Replacement spring front for original shock absorber.- Replacement spring rear for original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us
These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS ESA. The front and rear shock absorbers thus have a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS 2010-2012 with WP Original BMW ESA shock absorbers*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Scope of delivery:- Replacement spring front for original shock absorber.- Replacement spring rear for original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us.
The Touratech Suspension Level2 Set is the right choice for long-distance and touring use on the BMW R1200GS. These shock absorbers offer a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic preload adjustment, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly restored by hand via the hydraulic preload adjustment. The damping adjustment of this Level 2 shock absorber allows for the necessary influence on the rebound and compression stages to implement your individual requirements for riding comfort.Important points at a glance:=> The suspension set is configured and ready to ride based on our experiences for the BMW R1200GS (K25).=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorbers mentioned here are designed for a rider weight of up to 100kg including travel luggage.=> In this SET, the rear and front areas of the motorcycle are adjusted and in perfect balance.A suspension set that allows you to easily and comfortably respond to different loading conditions of your motorcycle. The base setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed document.Scope of delivery:- Ready-to-install front shock absorber Type Level1- Ready-to-install rear shock absorber Type Level2- ABE documents- Installation instructions / User manual ONLINEDo you have further questions? We are happy to advise you personally, please contact us
Lowering Replacement Springs by -30mm for BMW R 1200 GS ESA 2007 - 2010 The Touratech Suspension Lowering Kit. The set includes replacement springs for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Replacement spring for original front shock absorber - Replacement spring for original rear shock absorber - including installation instructions Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.