Touratech Starter Protection Black for BMW R1200GS LC + Adventure LC R1250GS + Adventure

Easy to install + lightweight + high protection effectWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts".Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with the Touratech crash bars stainless steel 038-5160- made of 3mm thick black anodized aluminum- easy and quick to installScope of delivery:Cylinder protection right + left, mounting materials, installation instructionsTo combine with original BMW crash bars, please order 045-5133!

Even in minor falls or when the motorcycle tips over, the front wheel can hit the ground in such a way that the standard steering stop on the fork bridge gets bent or sheared off. Replacing the fork bridge is expensive and frustrating, and additional parts can also be damaged. The Hard Part is made from laser-cut stainless steel and tough plastic components that absorb the impact. Additionally, a small distance is dampened by a rubber buffer. The steering angle is hardly limited by the Hard Part.The stainless steel part is coated in black plastic powder.The delivery includes all necessary mounting materials such as adhesive pads, screws, and nuts.Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5296-0 for that.Not suitable for special model R1250GS "HP" with special equipment "Sport Suspension". Please use 01-045-5296-0 for that.- Weight: approx. 250 g- Dimensions: approx. 175 mm x 85 mm x 55 mm

The brake fluid reservoir is quite openly accessible on the BMW. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut aluminum effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.Not suitable for equipment variants with original BMW frame protection!

With this cover, you can conceal the mounting points of the rear wheel cover if you want to forgo the wheel cover.(Off-road use, aesthetics)- Made from 2 mm aluminum- Surface anodized black