Touratech Side Stand Enlarger for BMW F700GS

Jetzt mit 60mm breiter Trittfläche!Nicht nur für Cross- und Endurofahrer, die eine mangelnde Sensibilität auf den Original-Rasten bemängeln, ein absoluter Durchbruch. Diese Fußrasten gehen mit einem Federgelenk den Bewegungen des Fußes nach vorne und hinten bis zu 20 Grad Neigung mit. Das schont nachhaltig die Stiefel und führt zu einem besseren Stand auf der Maschine - auch in extremen Situationen. Außerdem wird die Belastung für den Fahrer minimiert, da der Stiefel fast immer auf der vollen Auflagefläche der Raste steht und nicht, wie bei konventionellen Fußrasten, auf der Kante geführt werden muss. Insbesondere im OffRoad-Einsatz ist das sehr anstrengend.Aber auch bei einer Fahrt im Alltag kommen die Fußrasten sehr gelegen. Sie geben dem Fahrer die Gelegenheit die Füße bequem auf den Rasten zu positionieren und sorgen so für ein entspanntes Fahren. Durch die Drehbewegung lässt sich der Schaltvorgang bequem und schnell ausführen.Fakten: Bessere Kontrolle: Die Kräfte des Motorrades werden immer über die gleiche Stelle vollflächig auf die Stiefelsohle übertragen.Weniger Ermüdung: Die permanenten Stöße über die Fußrastenkanten werden besser abgefangen. Das Kippen mit der Stiefelsohle über die Rastenkanten entfällt.Mehr Kurvendruck: Bei Kurvenfahrten wird der Druck auf das Motorrad über die volle Rastenbreite aufgebaut, nicht nur über die Kanten.Mehr Gefühl: Durch die PivotPegz stellen die Fußrasten eine echte Verbindung zwischen Fahrer und Maschine her. Damit reduziert sich die Ermüdung des Fahrers und sein Gefühl für das Motorrad wird präziser.Egal ob im Gelände, auf Touren oder auf der Straße - die PivotPegz bringen einen entscheidenden Handling- und Komfortvorteil! Kompletter Satz mit allen Befestigungsteilen.

Especially when riding off-road, it is extremely important to always have a secure footing on the brake. With our enlarged support, the boot always finds its way to the lever, and the controllability is noticeably improved.Material: high-quality stainless steelBMW F800GS: for all model years!

Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide, boot-friendly, 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which offers a significant advantage when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving distinguishes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with a shot-blasted surface and laser engravingIncludes ABE.BMW F800GS: for all model years!

TOURATECH Fernreisefußrasten * Works *, low, for BMW R850GS, R1100GS, R1150GS, R1150GS Adventure, R1200GS + Adventure by 2012, R80GS, R100GS, F800GS, F700GS, F650GS (TWIN), F650GS, F650GS Dakar, G650GS, G650GS Sertao item Description  Touratech WORKS steel footrests. The best that Touratech has your boots to offer. Specially developed team according to the requirements of the Touratech works racing. The 52mm wide boots gentle 4mm thick stainless steel claw profile, with its special form the optimal combination of grip and self-cleaning. Due to the rounded edges the boot soles are not damaged, the open design ensures that mud and stones fall under the boots of the footrests and the boot profile has a secure hold on the catch. The slim design and taper to the outside of the ground clearance increased, which are especially when driving through deep ruts a great advantage compared to regular Enduro footrests or series products bietet.Die footrests 20 mm lower than the original notches (without rubber insert).  The Touratech Works foot pegs have been specially strengthened at the reception and are thus significantly less susceptible to impacts. Even the look of the Works products are a highlight. Blasted stainless steel with a special laser inscription records this product and shows visually the noble origins in extreme enduro Sport.- 52mm wide boots gentle 4mm thick stainless steel Krallenprofil- optimum combination of grip and Selbstreinigung- increased ground clearance by sleeker design significantly more resistant to Aufschläge- increased recording, finished with blasted surface and laser inscription Including car-specific reports according to § 19 STVZO.BMW F800GS: all years!

Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide boot-friendly 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which offers a significant advantage when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving distinguishes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with shot-blasted surface and laser engraving